SKF VectoLub VE1B Leitfaden

VE1B systems

SKF VectoLub

Installation and commissioning

Version 02

Date of issue October 2020

Publication number 951-130-441

Languages EN

Country/Countries EN …

Minimal quantity

lubrication system

VE1B

English translation of the original installation

and operation manual

Imprint

This manual – containing installation, opera-

tion and maintenance instructions complies

with EC-Machinery Directive 2006/42/EC

and is an integral part of the described lubri-

cation system. It must be kept for future use.

This manual – containing installation, op-

eration and maintenance instructions was

created in accordance with the valid stan-

dards and regulations on documentation.

This documentation is protected by copy-

ical reproduction, copying, and distribution

of this documentation or parts thereof by

means of processes such as data processing,

data carriers, and data networks is strictly

prohibited without the express permission of

SKF.

Subject to editorial or technical

modifications.

Service

For all technical questions, please contact:

SKF France

Lubrication Business Unit

204, bld Charles de Gaulle

B.P. 239

37540 St-Cyr-sur-Loire

FRANCE

Tel. +33 (0) 247 403 087

Or an SKF Service Centre, the addresses of

which are given on our website:

lubrication-france@skf.com

www.skf.com

Contents

Imprint ..........................2

Service ..........................2

Information concerning the EC

Declaration of Incorporation ........4

General..........................6

Meaning of symbols and corresponding

information .......................6

1. Safety instructions ..............7

1.1 Intended use...................7

1.2 Authorized personnel ............8

1.3 Danger relating to electric current . 8

1.4 Danger relating to system pressure. 8

1.5 Warranty and liability ............9

2. Lubricants ....................10

2.1 General ......................10

2.2 Selection of lubricants ..........11

2.3 Approved lubricants ............11

2.4 Lubricants and the environment ..12

2.5 Danger relating to lubricants .....12

3. Design and function ............13

3.1 Versions .....................13

3.2 Construction ..................15

3.3 Function .....................18

4. Installation instructions.........19

4.1 Positioning and installation ......19

4.3 Outlet connection ..............20

4.2 Inlet connection ...............20

4.4 Electric connection .............24

5. Transport, delivery and storage ..25

5.1 Transport ....................25

5.2 Delivery......................25

5.3 Storage ......................25

6. Commissioning ................26

6.1 General ......................26

6.2 Bleeding and commissioning .....26

6.3 Micropump flow rate adjustment..27

6.4 Pneumatic pulse generator ......29

6.5 Carrier air pressure regulator ....29

6.6 Reservoir filling................31

7. Shutdown ....................31

7.1 Temporary shutdown ...........31

7.2 Permanent shutdown. . . . . . . . . . .31

8. Maintenance ..................32

9. Failures ......................33

10. Technical data ................36

11. Spare parts and accessories ....37

Information concerning the EC Declaration of Incorporation

EC Declaration of Incorporation

in accordance with EC-Machinery Directive 2006/42/EC, Appendix II Part B

The manufacturer SKF France SAS, 204, Bld Charles de Gaulle, B.P. 239 – 37540 St-Cyr-sur-Loire – FRANCE, declares herewith the confor-

mity of the partly completed machine

Designation: Minimal quantity lubrication system

Type: VE1B

Order No.: see ID plate

Year of construction: see ID plate

with the following essential health and safety requirements of the EC Machinery Directive 2006/42/EC when released on the market.

1.1.2 · 1.13 · 1.3.2 · 1.3.4 · 1.5.1 · 1.5.6· 1.5.8 · 1.5.9 · 1.6.1 · 1.7.1 · 1.7.3 · 1.7.4

The relevant technical documentation is compiled in accordance with part B of Annex VII of this Directive. We undertake to transmit in electro-

nic format the relevant technical documentation in response to a reasoned request by the competent national authorities. The person empo-

wered to draw up the declaration is the technical standards manager. See the manufacturer's address.

Guillaume Amilien

R&D Manager

SKF France

Lubrication Business Unit

Gérard Gaudin

Production unit manager

SKF France

Lubrication Business Unit

Furthermore the followings directives and (harmonized) standards have been applied.

2011/65/CE RoHS II

2014/30/EU Electromagnetic compatibility | Industry

Standard Issue Standard Issue Standard Issue Standard Issue

NF EN ISO 12100 12-2010 NF EN 50581 01-2013 NF EN 61000-6-1 03-2007 NF EN 61000-6-4 03-2007

NF EN 809+A1 12-2009 NF EN 60947-5-1 09-2004 NF EN 61000-6-2 01-2006 NF EN 61000-6-3 03-2007

NF EN 60204-1 09-2006

The partly completed machine must not be put into service until the final machinery into which it is to be incorporated has been declared in

conformity with the provisions of the EC Machinery Directive 2006/42/EC and other relevant Directives.

St Cyr-sur-Loire, January 15th, 2015

General

Meaning of symbols and

corresponding information

In this manual, the symbols and safety

wordings shown on this page are intended to

communicate a particular risk to persons,

material assets, or the environment.

All safety instructions must be respected

by person exposed to these risks.The safety

instructions must be communicated to all

other persons.

Instructions attached directly to the equip-

ment, such as

• rotational direction arrows

• fluid connection labels, etc.

must be respected and remain perfectly

legible.

It is essential to read these instructions

thoroughly and to respect the safety instruc-

tions given.

Table 1

Hazard symbols

Symbol Standard Meaning

DIN 4844-2 W000 General hazard

DIN 4844-2 W008 Voltage

DIN 4844-2 W026 Hot surface

DIN 4844-2 W028 Slippery floor

DIN 4844-2 W027 Risk of hand injury

DIN 4844-2 W55 Risk of pollution

1. Safety instructions

The described product was manufactured in

accordance with all generally acknowledged

regulations pertaining to technology, occu-

pational safety, and accident prevention.

However, dangers that can cause physical

injury to persons or damage to other mate-

rial assets might still occur during the use of

the product.

!These instructions must be read

and understood by all persons

who are involved with the installation,

operation, maintenance, and repair of

the product. These instructions must be

kept close to the equipment for future

reference.

Note that these installation instruc-

tions is an integral part of the product. It

must be handed over to the new opera-

tor of the product if the product is sold.

!In addition to the information pro-

vided in the installation instruc-

tions, all generally applicable regulations

on accident prevention and the environ-

ment must be observed.

1.1 Intended use

The described product is for supplying cen-

tralized lubrication systems with lubricant

and is intended for use in centralized lubri-

cation systems. Other use or use beyond this

purpose is considered unintended.

Products of SKF must not be used in con-

junction with substances and mixtures clas-

sified as hazardous by the Annex I part 2-5

of the CLP regulation (EC 1272/2008), and

identified with hazard pictograms GHS01-

GHS06 and GHS08.

None of the products manufactured by

SKF can be used in conjunction with gases,

liquefied gases, pressurized gases in solution

and fluids with a vapor pressure exceeding

normal atmospheric pressure (1013 mbars)

by more than 0.5 bar at their maximum per-

missible temperature.

Unless otherwise noted, products of SKF

must not be used in conjunction with explo-

sive atmospheres according to the ATEX-Di-

rective 2014/34/EU.

!All products from SKF may be

used only for their intended pur-

pose as described in this brochure and in

any instructions.

1.2 Authorized personnel

The products described in the installation in-

structions may only be installed, operated,

maintained, and repaired by qualified ex-

perts. Qualified experts are persons who

have been trained, instructed, and familiar-

ized with the end product into which the de-

scribed product is installed.

These persons are considered capable of

such tasks due to their education, training,

and experience with valid standards, condi-

tions, accident prevention regulations in ef-

fect, and installation conditions. They should

be able to carry out the required tasks and to

recognize – and thus avoid – any dangers

that might otherwise occur.

A definition of what constitutes a qualified

person and who are unqualified persons are

stipulated in DIN VDE 0105 and IEC 364.

1.3 Danger relating to electric

current

The electrical connection for the described

product may only be established by qualified,

instructed persons who have been autho-

rized by the operator or owner to carry out

this task. If the product is improperly con-

nected, substantial material or personal

damage my be the consequence.

DANGER!

Working on products that have

not been disconnected from the power

supply can cause serious injury or death

to persons. Installation, maintenance,

and repair work may only be carried out

by qualified experts on products that

have been disconnected from the power

supply. The supply voltage must be

turned off before any product compo-

nents are opened. .

1.4 Danger relating to system

pressure

DANGER!

Centralized lubrication systems

are under pressure when they are being

operated. Such systems must therefore

be depressurized before starting instal-

lation, maintenance, or repair work and

before making any changes to the

system.

Inhaltsverzeichnis

Andere SKF Schmiersystem Handbücher

SKF

SKF Vectolub VTEC Leitfaden

SKF

SKF TLMP 1008 Series Bedienungsanleitung

SKF

SKF LINCOLN P203 Bedienungsanleitung

SKF

SKF GVP-S-034-3D+924 Bedienungsanleitung

SKF

SKF LUBRILEAN Basic Bedienungsanleitung

SKF

SKF TLAC 50/B Bedienungsanleitung

SKF

SKF 729101/300MP Bedienungsanleitung

SKF

SKF 501-301-310-S1 Bedienungsanleitung

SKF

SKF SYSTEM 24 LAGD 60 Bedienungsanleitung

SKF

SKF UFD20 Series Bedienungsanleitung

SKF

SKF Lincoln V340HH Original Betriebsanleitung

SKF

SKF GVP-S-049-1 Bedienungsanleitung

SKF

SKF LINCOLN EDL1 Bedienungsanleitung

SKF

SKF SKF SYSTEM 24 Bedienungsanleitung

SKF

SKF OLA Series Bedienungsanleitung

SKF

SKF TLMR Bedienungsanleitung

SKF

SKF TLMR 101 Bedienungsanleitung

SKF

SKF KFG Bedienungsanleitung

SKF

SKF CLU5 Bedienungsanleitung

SKF

SKF LINKOLN A Series Bedienungsanleitung

SKF

SKF LINCOLN ATEX PSG1 Series Bedienungsanleitung

SKF

SKF CLU4eco PDYE Series Kurzanleitung

SKF

SKF TLMR Bedienungsanleitung

SKF

SKF OLA 1 Series Bedienungsanleitung

Beliebte Schmiersystem Handbücher anderer Marken

Atlanta

Atlanta BKI 109 e Bedienungsanleitung

Viper

Viper Maxi MK 2 Beilage

MEMOLUB

MEMOLUB HPS Bedienungsanleitung

BEROTEC

BEROTEC Mofessor Bedienungsanleitung

TUTORO

TUTORO Auto Gebrauchsanweisung

Bijur Delimon

Bijur Delimon V5B Bedienungsanleitung

iSHAN

iSHAN YGL-L Bedienungsanleitung

iSHAN

iSHAN YET-A1 Bedienungsanleitung

DLS

DLS FlexxPump 1500 Bedienungsanleitung

Lincoln

Lincoln SKF KFU2 Series Bedienungsanleitung

Sumake

Sumake SA-2362M Bedienungsanleitung

Graco

Graco 203-697 E Series Bedienungsanleitung

SMC Networks

SMC Networks AL Series Bedienungsanleitung

MEMOLUB

MEMOLUB HPS Bedienungsanleitung

Wittenstein Alpha

Wittenstein Alpha LUC+400 Bedienungsanleitung

Burks

Burks 104300 Bedienungsanleitung

DLS

DLS 125 Bedienungsanleitung

Emerson

Emerson NL4-LBM Series Montageanleitung