SKF TKRT 10 Bedienungsanleitung
Instructions for use
Mode d’emploi
Bedienungsanleitung
Instrucciones de uso
Manuale d’istruzioni
Instruções de uso
使用说明书
Инструкция по эксплуатации
SKF TKRT 10
English 3
Français 11
Deutsch 19
Español 27
Italiano 35
Português 43
中文 51
Русский 59
3SKF TKRT 10
Table of contents
EU Declaration of conformity................................................................. 4
Safety recommendations....................................................................... 5
1. General features ............................................................................. 6
2. Technical data................................................................................. 6
3. Operation ....................................................................................... 8
4. Functions description ..................................................................... 8
5. Non-contact measurements particularities.................................... 10
Original instructions
4SKF TKRT 10
EU Declaration of conformity
We,
SKF Maintenance Products
Kelvinbaan 16
3439 MT Nieuwegein
The Netherlands
herewith declare that the following product:
SKF Tachometer
TKRT 10
has been designed and manufactured in accordance with:
EMC DIRECTIVE 2014/30/EU as outlined in the harmonized norm for
EN 61326:2003
The laser is classified in accordance with the EU norm
EN 60825-1:2005
EUROPEAN ROHS DIRECTIVE 2011/65/EU
Nieuwegein, The Netherlands,
March 2017
Sébastien David
Manager Product Development and Quality
5SKF TKRT 10
Safety recommendations
• Always read and follow the operating instructions for use.
• Always wear safety goggles when using the tachometer.
• Never stare directly into the laser source.
• Never open the instrument and attempt to adjust the output of
the laser.
• Remove the battery when the instrument is not in use for an
extended period.
• All repair work should be taken care of by an SKF repair shop.
6SKF TKRT 10
1. General features
The SKF laser tachometer set TKRT 10 features a large LCD backlit display
that gives excellent visibility in most applications.
It provides fast and accurate Contact and Non-Contact rotational and surface
speed measurements of rotating objects.
It is supplied with 3x contact adaptors
for rpm and linear speed contact
applications.
Other features include 10 memories,
Maximum and Minimum and Average
speed modes.
2. Technical data
General
Display 5 digit LCD backlit display
Displayed resolution 0,1 r/min up to 10 000 r/min,
otherwise 1 r/min
Memory 10 readings memories
Low battery indicator Yes
Auto switch off After 15 seconds
Measurement
Optical modes r/min, hertz
Contact modes r/min, metres, inches, yards, feet, per min, hertz
Count modes Total revs, metres, feet, yards
Sampling time 0,5 seconds (over 120 r/min)
Linear speed 0,2 to 1 500 metres/min (4 500 ft/min)
7SKF TKRT 10
Optical measurement
Rotational speed range 3 to 99 999 r/min
Accuracy ±0,05% of reading ±1 digit
Measuring distance 50 to 500 mm (1.9 to 19.7 in.)
Angle of operation ±45°
Laser sensor 1 ™built-in class 2 laser
Contact measurement
Rotational speed range 2 to 20 000 r/min
Accuracy ±1% of reading ±1 digit
Contact adaptors Included with conical tip,
conical recess and wheel
Battery and power
Battery 1 ™9 V alkaline type IEC 6F22
Operation time 12 hours continuous use
Additional power source 6 V DC charging port
(charger not included)
Size and weight
Product dimensions 160 ™60 ™42 mm
(6.3 ™2.4 ™1.7 in.)
Product weight 160 g (0.35 lbs)
Carrying Case
dimensions 260 ™85 ™180 mm
(10.3 ™3.4 ™7.0 in.)
Total weight
(incl. case) 680 g
(1.5 lbs)
Operating requirements
Operating temperature 0 to 50 °C (32 to 122 °F)
Storage temperature –10 to +50 °C (14 to 122 °F)
Relative humidity 10 to 90% RH non-condensing
IP rating IP 40
8SKF TKRT 10
Case contents
1 ™SKF Tachometer TKRT 10
1 ™set of 3 ™contact adaptors
1 ™9 V battery
1 ™set of reflective tape
1 ™printed instructions for use
Spare part
TKRT-RTAPE Reflective tape
TDTC 1/A General toolcase without inlay, size A
3. Operation
• Open the battery compartment cover and install a 9V Battery.
• Non-Contact:
Attach the self-adhesive reflective tape on the object whose rotational
speed is to be measured. The reflective tape should be placed as close to
the outer edge of the object to be measured as possible.
• Contact:
Select the contact tip the most suited to the application and connect it to
the tachometer using the contact adapter provided.
• Press the “MEAS” button. Point the laser spot at the object or bring
the contact probe to the object .
Read the measurement on the LCD display.
4. Functions description
In scan mode, the current measurement is displayed on the main display.
The main display will hold the last values until the tachometer automatically
turns off after 15 seconds.
Measurement Modes:
There are two measurement groups:
• Turn the instrument On by pressing the “MEAS” button.
• Press the “MODE” button to browse through the following modes:
RPM, rPm, HZ, M/M, I/M, F/M, Y/M.
• Press and hold the “MODE” button for 3 seconds to switch to the next
measurement group.
• Press the “MODE” button once to browse through the following modes:
REV, M, In, FT, Yd.
Andere Handbücher für TKRT 10
1
Inhaltsverzeichnis
Sprachen:
Andere SKF Messgerät Handbücher
SKF
SKF 800030 Produkthandbuch
SKF
SKF THGD 100 Bedienungsanleitung
SKF
SKF Baker AWA-IV Series Bedienungsanleitung
SKF
SKF LAHD 500 Bedienungsanleitung
SKF
SKF Multilog IMx-S Series Bedienungsanleitung
SKF
SKF IPM 12 Bedienungsanleitung
SKF
SKF IMx-Rail Bedienungsanleitung
SKF
SKF On-line System WVT Bedienungsanleitung
SKF
SKF FL15 Handbuch
SKF
SKF Multilog On-line System IMx-T Bedienungsanleitung
SKF
SKF LAGM 1000E Bedienungsanleitung
SKF
SKF TKRT 25M Bedienungsanleitung
SKF
SKF TKSU 10 Bedienungsanleitung
SKF
SKF LAHD 500 Bedienungsanleitung
SKF
SKF TKRT 10 Bedienungsanleitung
SKF
SKF TMEH 1 Bedienungsanleitung
SKF
SKF LAGM 1000E Bedienungsanleitung
SKF
SKF WEM-200 Bedienungsanleitung
SKF
SKF TKST 21 Bedienungsanleitung
SKF
SKF PHL FM 10/400 Bedienungsanleitung
