SMART-AVI HDR-8X8-XT Bedienungsanleitung

Made in U.S.A. www.SmartAVI.com 1-800-AVI-2131

HDR-8X8-XT

User Manual

Distribute 8 4K HDMI sources to 8 local HDMI monitors and 8 remote HDMI

displays (16 Total) via HDBaseT with IR, and TCP/IP control support

4K Ultra-HD 8X8 HDBaseT HDMI Matrix with POE

TABLE OF CONTENTS

WHAT'S IN THE BOX? 2

INTRODUCTION 3

FEATURES 3

APPLICATIONS 3

TECHNICAL SPECIFICATIONS 4

HARDWARE INSTALLATION 5

FRONT PANEL FUNCTIONS 6

REAR PANEL 7

REMOTE CONTROL 8

CONTROL VIA ETHERNET 9-10

EDID 11

HDBaseT RECEIVER 12

IR CONTROL SYSTEM 13

LIMITED WARRANTY STATEMENT 14

Figure 2-1

Figure 2-2

PART NO. QTY DESCRIPTION

HDR-8x8-XTS 1 4K-Ready 8x8 HDMI Matrix Switch with CAT5/6/7 HDBaseT

CCPWR06 1 6' Power Plug Cable

RM-HDR8X8XT 1 IR Remote Control

BRK-HDR8X8XT 2 Rack mount brackets

1 Quick Start Guide

WHAT’S IN THE BOX?

* Plug in IR emitters and IR eyes for bi-directional remote control of connected devices are sold separately.

INTRODUCTION

The HDR-8x8-XT with simultaneous CAT5e/6/7 and HDMI outputs connects eight HDMI input sources to

sixteen displays. This matrix features eight mirrored HDMI outputs, providing 8 HDMI output ports and 8

CAT-Cable output ports simultaneously. The HDR-8x8-XT supports the transmission of video (resolutions

up to 1080p Full HD and 4Kx2K@30Hz) and supports high resolution digital audio formats such as LPCM

7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio. Connect an HDBaseT Receiver (Sold

Separately) to each of the CAT-Cable outputs to extend the HDMI signal up to 328ft/100m for multi-room

connectivity. The HDR-8x8-XT works with Blu-Ray players, Set-Top boxes, Home Theater PCs, and game

consoles that connect to an HDMI display. Any source is accessible at all times by any display through the

supplied IR Remote Control, TCP/IP, or by using the selection buttons on the front panel. This device sup-

ports High Definition Audio, and 3D signal compatibility.

FEATURES

 HDMI input supports: HDMI2.0, HDCP 2.2 and DVI1.0 compliant

 Supports HDMI 3D pass-through

 Supports resolutions from VGA~WUXGA and HD resolutions from 480i~1080p~4Kx2K@30 depending

on the EDID settings

 Supports transmission distances up to 328ft/100m through CAT5e/6/7 cable

 Supports Power Over Ethernet (POE) function

 Supports simultaneous HDMI and CAT5e/6/7 outputs

 Supports wideband IR(30-60Khz) matrix system, IR transport (Plug in IR emitters and IR eyes are sold

separately)

 Channels can be forward or backward. And supports GLOBAL IR input and output. (Plug in IR emitters

and IR eyes are sold separately)

 Supports remote control, front panel buttons control and TCP/IP Control

 Supports smart EDID management

 Supports Digital Audio and stereo audio outputs

 Support bi-directional IR control (Plug in IR emitters and IR eyes are sold separately)

 Supports HDBaseT LAN Serving function

 Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD

 Master Audio transmission

APPLICATIONS

 Sports Arenas

 Concert Halls

 Cinemas & Multiplex Theaters

 Convention Centers

 Hotel Lobbies

 Transportation Hubs (Airports, Train Stations)

TECHNICAL SPECIFICATIONS

VIDEO

HDMI Format HDMI 1.4, HDMI2.0, HDCP 2.2 and DVI1.0 compliant

Video Bandwidth 297MHz[10.2Gbps]

Input Resolution Up to 4K (3840x2160 @ 30Hz)

Output Resolution Up to 4K (3840x2160 @ 30Hz)

HDMI Connector Type A 19 pin female

RJ-45 Connector WE/SS 8P8C

AUDIO

Audio Connectors (8) 3.5mm, (8) Coaxial

HDMI Audio Embedded

Supported Audio Formats LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio

Supported

Wideband IR(30-60Khz) matrix system.

IR transport channel can be forward or backward.

GLOBAL IR input / output.

CONTROL

Front Panel Front panel buttons

IR Infrared Remote Control 3.5mm connector: (TX and RX) IR Receiver/IR Blaster

TCP/IP Control via Ethernet-connected computer

OTHER

Input Ports (8) HDMI, (10) IR Receiver, (1) RJ-45(PC Control), (8) RS-232 (Phoenix Jack), (1)

RJ45 (Ethernet to provide internet access)

Output Ports (8) CAT5e/6/7, (9) IR Blaster, (8) HDMI (8) Coax Audio, (8) Digital audio

RS-232 (8) 3-pin Phoenix Jack for bi-directional control with HDBT Receivers

Power Supply Internal 100-240 VAC 50/60Hz

Dimensions 17” W x 14.6” D x 4” H

Weight 14.9 lbs. Unit only

Approvals UL, CE, ROHS Compliant

Operating Temp. 32 to +104°F (0 to 40°C)

Storage Temp. -4 to +140°F (-20 to 60°C)

Humidity Up to 90% RH (non-condensing

HARDWARE INSTALLATION

BASIC SETUP:

1. Turn the power off on the HDR-8X8-XT. Do not hotplug! Insert and extract cables carefully with the

power switch off. Connecting and disconnecting while the HDR-8X8-XT is powered can result in dam-

age to circuitry.

2. Connect up to 8 sources to the HDMI inputs on the HDR-8X8-XT.

3. Connect up to 8 HDMI displays to the HDMI output ports on the HDR-8X8-XT.

4. Connect up to 8 HDBaseT receivers (Sold Separately) with HDMI displays connected to them to the

HDBaseT output ports on the HDR-8X8-XT.

5. Optionally connect up to 8 stereo speaker pairs or stereo amplifiers to the audio output ports on the

HDR-8X8-XT.

6. Optionally connect the HDR-8X8-XT RJ45 PC CONTROL port to your network for remote control via the

built in Webpage.

7. Optionally connect the HDR-8X8-XT RJ45 port labeled ETHERNET to supply internet access to devices

connected via HDBaseT receivers.

8. For power, plug in the HDMI sources first, followed by the HDR-8X8-XT Matrix followed by the display

receivers, followed by all remaining connected devices.

Figure 5-1

Figure 5-2

FRONT PANEL FUNCTIONS

Figure 6-1

1. LCD: Displays all information regarding individual input settings/output settings and EDID manage-

ment.

2. IR: IR Receiver window (accepts only the HDR 8x8 -XT remote control signal).

POWER: Press this button to power the device on/off. The LED will illuminate green when the power is on,

red when it is in 'Standby' mode.

LOCK: Press this button to lock all the buttons on the panel, press again to unlock.

3. OUTPUT/INPUT:

To assign an output to an input using the front panel buttons, press the desired output button followed

corresponding input.

Examples:

[All] Button, Press OUTPUT ALL, then INPUT 1 and OUTPUTs A/B/C/D/E/F/G/H will be set to INPUT 1.

[PTP] Button, Press PTP, then OUTPUTs A/B/C/D/E/F/G/H will "point to point" map to INPUTs

1/2/3/4/5/6/7/8.

4. EDID: The LCD will display the EDID operation.

To configure Smart EDID Operation, press the MENU button to enter the EDID management window.

Press the UP or DOWN button to select the needed EDID setting. Press the ENTER button to select the

input source to download. Any of the EDID input source listed on the LCD can be downloaded.

REAR PANEL

Figure 7-1

1. GND: Connect the Housing to ground.

2. IR Matrix

IR EXT: If the panel sensor is obstructed or the unit is installed in a closed area out of infrared line of

sight, an IR RX receiver (EYE) can be inserted into the IR EXT port at the rear to extend the IR sensor

range and enable local control of the matrix. (Plug in IR emitters and IR eyes are sold separately)

See the IR CONTROL SYSTEM section of this manual for IR INPUT and IR OUTPUT set up and operation.

3. PC CONTROL

TCP/IP: This port is the link for TCP/IP control, connect to an active Ethernet link with an RJ45 terminated

cable.

4. AUDIO OUTPUT & RS-232: The coaxial and analog audio outputs allow the audio coming into the HDR-

8X8-XT via the HDMI INPUT to be output to stereo speakers or audio amplifiers. The TX and RX for RS232

communication allows you to transmit RS-232 via the corresponding HDBaseT OUTPUT over CAT 5e/6

cables to an HDX-POE-PRO HDBT receiver. For example, you can connect a control PC to the OUTPUT A,

RS-232 connector on the HDR-8X8-XT. Then connect an RS-232 device to the RS-232 connector on the

HDX-POE-PRO HDBT receiver connected to OUTPUT A on the HDR-8X8-XT .

5. HDMI INPUT: Connect to the HDMI input source devices such as a Computer, DVD player or a Set-top

Box with HDMI cables.

6. VIDEO OUTPUT: The HDMI OUTPUT connect to HDMI equipped TVs or monitors and the HDBaseT OUT-

PUT connects to an HDBaseT Receiver such as the HDX-POE-RX. Each of these outputs works with the

corresponding audio and RS-232 outputs in section 4.

7. Ethernet: This slot provides Internet connectivity to the devices connected to the 8 RJ45 OUTPUT ports.

8. AC POWER INPUT: Connect to AC power with AC power cable.

REMOTE CONTROL

1. Power on /Standby：Press this button to power

on the matrix or put it in standby mode.

2. Input port selection area：Press these buttons

to select input 1-8. Press the forward/backward but-

tons to cycle from input 1-8.

3. Output port selection area：Press these buttons

to select output A-H, including ALL.

First select the Output, then select the Input.

Figure 8-1

CONTROL VIA ETHERNET

HDR-8X8-XT TCP/IP control is a feature that allows source / display switching, EDID configuration and

Network settings to be controlled remotely via HTTP. Manage your HDR-8X8-XT with ease from anywhere

in the world.

Make sure the HDR-8X8-XT RJ45 PC Control port is connected to your network.

First you must find the IP address. Download the HDR-8X8-XT IP-Finder2 software from

http://smartavi.com/helpful-links.html

Once you have unzipped it onto your PC, execute the software and you should see a window like the one

shown in Figure 9-1.

Click the [Search Device] button. The

IP address for the HDR-8X8-XT should

appear.

Enter the IP address into a web

browser of your choice. You should

see the HDR-8X8-XT Matrix Control

Page as shown in Figure 9-2.

Figure 9-1

Figure 9-2

CONTROL VIA ETHERNET (Continued)

The Matrix Control Page is where

you switch inputs to outputs. The

column running top to bottom on

the left shows the 8 outputs. The

Top row shows the inputs or

sources. Clicking the box where the

input intersects the output sets the

connection.

Figure 10-1 shows input or source

1 connected to outputs 1,2,3 &4.

Output 5 is connected to Input 5, 6

to 6, 7 to 7 and 8 to 8.

You can also change EDID settings

from the Matrix Control Page. See

the EDID section of this manual for

more information on EDID.

Figure 10-1

The IP Config page shown in Figure

10-2 allows you to modify the net-

work settings.

Figure 10-2

Andere Handbücher für HDR-8X8-XT

Inhaltsverzeichnis

Andere SMART-AVI Matrix-Umschalter Handbücher

SMART-AVI

SMART-AVI MXWALL-UHD Bedienungsanleitung

SMART-AVI

SMART-AVI HDR4X2 Bedienungsanleitung

SMART-AVI

SMART-AVI MXU-88 Bedienungsanleitung

SMART-AVI

SMART-AVI FXCORE MX88 Bedienungsanleitung

SMART-AVI

SMART-AVI 4K-WALL Bedienungsanleitung

SMART-AVI

SMART-AVI CATSWITCH Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-4x4-Plus Bedienungsanleitung

SMART-AVI

SMART-AVI CATSwitch CSWP64X16S Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-4x4-Plus Bedienungsanleitung

SMART-AVI

SMART-AVI MU-88 Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-ULTRA Bedienungsanleitung

SMART-AVI

SMART-AVI MXU-88 Plus Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-4x4-Plus Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-8X8-Plus Bedienungsanleitung

SMART-AVI

SMART-AVI MXWall-LT Bedienungsanleitung

SMART-AVI

SMART-AVI MXCORE Series Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-4X2-Pro Bedienungsanleitung

SMART-AVI

SMART-AVI MU-88 Bedienungsanleitung

SMART-AVI

SMART-AVI QWALL-HD Bedienungsanleitung

SMART-AVI

SMART-AVI SNV64X16S Bedienungsanleitung

SMART-AVI

SMART-AVI HDR8X8 Bedienungsanleitung

SMART-AVI

SMART-AVI DVR-4X4 Bedienungsanleitung

SMART-AVI

SMART-AVI CATXPro Bedienungsanleitung

SMART-AVI

SMART-AVI VNET+2P Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte