SMART-AVI SuperMatrix Bedienungsanleitung

ser

anua

uperMatrix

Multi-

ormat non-blockin

audio, video, RS-232

but

n m

rix

Controlled via so

tware, remote control or over the Internet

Notice:

The information contained in this document is subject to change without notice. SmartAVI makes no

warranty of any kind with regard to this material, including but not limited to, implied warranties of

merchantability and fitness for any particular purpose.

SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in

connection with the furnishing, performance or use of this material.

No part of this document may be photocopied, reproduced or translated into another language

without prior written consent from SmartAVI.

Table of Contents

Chapter 1: Introduction ................................................................................................................ 4

What’s in the Box ..................................................................................................................... 4

Overview .................................................................................................................................... 5

Applications ............................................................................................................................... 5

Chapter 2: Installation.................................................................................................................... 6

Connecting the SuperMatrix (Quick Start) ....................................................................... 6

Connecting the SuperMatrix (Detailed Instructions) .................................................... 7

Video and Audio Inputs .................................................................................................. 7

Connecting the Receivers (XTPro/XTAV)................................................................... 8

Connecting the Communication Cable...................................................................... 9

System Power ON.............................................................................................................. 10

Using IR Devices ................................................................................................................ 11

Connecting the RS232 Devices .................................................................................... 12

Connecting the Super Matrix to the HD Source ..................................................... 13

RJ45 Preparation ............................................................................................................... 14

Chapter 3: Software Installation and Operation................................................................... 16

The Matrix Panel ....................................................................................................................... 17

The Button Panel...................................................................................................................... 18

Macros.......................................................................................................................................... 19

Controlling with IR .................................................................................................................. 20

Controlling the SMTCP ........................................................................................................... 21

Chapter 4: Technical Information .............................................................................................. 23

Chapter 5: Communications Protocol ..................................................................................... 25

Chapter 5: Appendices.................................................................................................................. 26

What’s in the box:

Super Matrix A/V: Audio/Video Matrix over CAT5

QTY Item Part No.

1Component or UXGA + Audio over CAT5 8x8 Matrix with RS232 Control. Includes:

[SMX-AV0808, CCRS232MF6, SMP-SW and (CCPWR06US) or (CCPWR06EU] SMX-AV0808S

1Component or UXGA + Audio over CAT5 16x16 Matrix with RS232 Control. In-

cludes: [SMX-AV1616, CCRS232MF6, SMP-SW and (CCPWR06US) or (CCPWR06EU] SMX-AV1616S

1Component or UXGA + Audio over CAT5 32x16 matrix with RS232 control. In-

cludes: [SMX-AV3216, CCRS232MF6, SMP-SW and (CCPWR06US) or (CCPWR06EU] SMX-AV3216S

Super Matrix A/V+Data: Audio/Video+RS232/IR over CAT5

QTY Item Part No.

1Component or UXGA/Audio + RS232/IR over CAT5 8x8 matrix with RS232 control.

Includes: [SMX-AVD0808, CCRS232MF6, SMP-SW and (CCPWR06US) or (CCP-

WR06EU]

SMX-AVD0808S

1Component or UXGA/Audio + RS232/IR over CAT5 16x16 matrix with RS232

control. Includes: [SMX-AVD1616, CCRS232MF6, SMP-SW and (CCPWR06US) or

(CCPWR06EU]

SMX-AVD1616S

1Component or UXGA/Audio + RS232/IR over CAT5 32x16 matrix with RS232

control. Includes: [SMX-AVD3216, CCRS232MF6, SMP-SW and (CCPWR06US) or

(CCPWR06EU]

SMX-AVD3216S

Receivers and Accessories

Item Part No.

XTAV UXGA/Audio Receiver. Includes: [XTA-RX and (PS5VD1A)] XTA-RXS

XTPRO UXGA/Audio/RS232/IR Receiver with dual video output. Includes: [XTP-RX and (PS5-

VD1A)] XTP-RXS

XTPRO UXGA/Audio/RS232/IR Long Range Receiver with dual video output. Includes: [XTP-RXL

and (PS5VD1A)] XTP-RXLS

External infrared receiver; IR range of 10 to 30ft SM-EYE

IR emitter 6ft single LED SM-LED

TCP/IP Control. Includes: [SMTCP, (CCRS232MM ) and (PS5VD1A)] SM-TCPS

Handheld IR Remote Controller SM-RMT

Smart control application software providing source/destination selection, name editing, and mes-

saging. Included in all SmartAVI Matrix investments. SMP-SW

Chapter 1: Introduction

Overview

At times multiple AV signals need to be transferred to multiple nearby output monitors. The Super

Matrix allows multiple VGA/audio inputs to be routed to multiple outputs simultaneously, by way of

a direct connection into the router.

The Super Matrix is a high-quality switching matrix for VGA type signals. All signal formats are catered

for including VGA, SVGA, XGA, RGBHV and sync on green (SOG) applications. For ease of installation,

Standard VGA connectors (HD15 sockets) are used for the input as well as the output video signal. All

that is required is a standard pin-to-pin VGA cable to connect to the signal source.

Stereo audio can also be routed to multiple outputs. The audio can either be routed independently or

together with the video signal using the SmartControlPro software that is very easy to use.

Note: for maximum signal performance, use only high quality cable that has internal coaxial cable for

each color.

The units contain a very high bandwidth routing matrix for the Red, Green and Blue video channels.

Chapter 1: Introduction

Wall Displays

Audio Visual Presentation

Digital media

Shopping centers

Airports

Security

Dealer rooms

Point of sale

Control rooms

Hotels

Applications

Connecting the SuperMatrix (Quick Start)

Warning: As a precaution, we recommend that you disconnect all power cords and make sure that

all devices are turned off.

1. Connecting the video

connect all the video input at the SuperMatrix to all the sources. The SuperMatrix

used HD15 Male cable to support XVGA, Svideo, Components video and

Composite Video ( SmartAVI offers special Adaptors for most of the video type of

signals)

1. Connecting the Audio

connect all the audio input at the SuperMatrix to all the sources. The SuperMatrix

used .5mm JACK le cable to support analog audio ( SmartAVI offers special Adaptors

or most of audio video type of signals)

2. Connect all remotes unit receivers via Cat5 cable

3. Connect a serial cable from the RS-232 port on your computer to the RS-232 port located

on the back panel of the SuperMatrix unit.

4. Plug power cable into the SuperMatrix unit.

5. Install SmartControlPro software.

6. Power on the SuperMatrix.

Chapter 2: Installation

Connecting the SuperMatrix (Detailed Instructions)

Video and Audio Inputs

The video input for the SuperMatrix is a standard HD15 connection.

Connect all of the Input video sources to the back of the SuperMatrix unit.

Hint: You may want to label the input video connections so as not to lose track of where

the signal is coming from. Later on when the software is installed you will be able to give

each connection a name and the software will remember it for you. This way you can

switch the video connections without having to look at the physical connections on the

back of the unit. (You can also use the included page at the end of this manual in order

to keep track of the connections as you make them.)

The audio inputs for the SuperMatrix are standard 3.5 mm Stereo Mini plug connectors.

Connect all of the audio inputs to the back of the SuperMatrix unit. Many computer audio

sources use this standard connection but there is other equipment such as receivers, and

VCRs where a special adapter cable will be needed. Such as a 3.5mm mini plug to stereo

RCA cable.

Make sure that the audio and video are coming from the same source and are plugged the

same input number. For example, if the audio from one computer is connected to input 1,

then the video should also be connected to input 1.

Video and Audio Outputs

The video and audio connections for the SuperMatrix outputs are exactly the same. The only differ-

ence is that they are located on the left side of the back panel

Connect all of the external video monitors and corresponding speakers to the output

connections located on the back of the SuperMatrix unit.

Chapter 2: Installation

Optional

Connecting the Receiver: XTPro-RX

Connecting The Receiver

Connect CAT5 cable coming from the SuperMatrix to the back of the receiver.1.

Connect 1-2 display monitors to the VGA out connectors on the front of the receiver.2.

Connect 1-2 sets of external speakers to the audio output connections on the front of the3.

unit. (Standard 3.5mm stereo Mini plug)

Connecting the Receiver: XTAV-RX

Connecting The Receiver

Connect CAT5 cable coming from the SuperMatrix to the back of the receiver.1.

Connect 1-2 display monitors to the VGA out connectors on the front of the re-2.

ceiver.

Connect 1-2 sets of external speakers to the audio output connections on the front3.

of the unit. (Standard 3.5mm stereo Mini plug)

Chapter 2: Installation

Connecting the Control Communication Cable: RS-232

Each unit can be controlled by a RS-232 port connected from the back of the chassis. The

SmartControlPro software will be used to control the units.

Connect the RS-232 cable the control computer by connecting the female RS-232 connector1.

into the male RS-232 connector of the PC. Turn the side screws so that it does not

accidentally become disconnected

Connect RS-232 cable connector to the male RS-232 connector on the back of the chassis.2.

RS-232

Chapter 2: Installation

SuperMatrix connection diagram

System Power ON

You are now ready to turn on the system. Make sure that all connections are plugged in and all

video monitors and speakers that you wish to use are connected.

Plug in the power cord to the back of the1. SuperMatrix unit. Connect this power cord to the

wall.

Turn computer on and make sure that the boot up process has completed.2.

Observe to see if LEDs are lit. The3. SuperMatrix unit has two. One of those LEDs is for the

power and the other is to indicate that the unit is functioning properly.

Power on all external monitors and speakers.4.

Inhaltsverzeichnis

Andere SMART-AVI Matrix-Umschalter Handbücher

SMART-AVI

SMART-AVI CATSWITCH Bedienungsanleitung

SMART-AVI

SMART-AVI MXU-88 Bedienungsanleitung

SMART-AVI

SMART-AVI MU-88 Bedienungsanleitung

SMART-AVI

SMART-AVI MXCORE Series Bedienungsanleitung

SMART-AVI

SMART-AVI MXWALL-UHD Bedienungsanleitung

SMART-AVI

SMART-AVI DVR4X4S Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-4X2-Pro Bedienungsanleitung

SMART-AVI

SMART-AVI DVR-4X4 Bedienungsanleitung

SMART-AVI

SMART-AVI MU-88 Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-8X8-XT Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-4x4-Plus Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-4x4-Plus Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-4x4-Plus Bedienungsanleitung

SMART-AVI

SMART-AVI HDR-8X8-XT Bedienungsanleitung

SMART-AVI

SMART-AVI CATXPro Bedienungsanleitung

SMART-AVI

SMART-AVI MXU-88 Bedienungsanleitung

SMART-AVI

SMART-AVI MXU-88 Plus Bedienungsanleitung

SMART-AVI

SMART-AVI FXCORE MX88 Bedienungsanleitung

SMART-AVI

SMART-AVI SNV64X16S Bedienungsanleitung

SMART-AVI

SMART-AVI DVR-4X4 Bedienungsanleitung

SMART-AVI

SMART-AVI HDR4X2 Bedienungsanleitung

SMART-AVI

SMART-AVI 4K-WALL Bedienungsanleitung

SMART-AVI

SMART-AVI VNET+2P Bedienungsanleitung

SMART-AVI

SMART-AVI MXWall-LT Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Extron electronics

Extron electronics MTPX Plus Series Bedienungsanleitung

Key Digital

Key Digital Champion KD-16x16CS Bedienungsanleitung

Kramer

Kramer VS-66H Bedienungsanleitung