SMART Board 685ix Bedienungsanleitung

SMART Board™ 685ix

Premium Interactive

Whiteboard System

Installation on the FUWM-600

Fixed Unit Wall Mount

Product registration

If you register your SMART product, we’ll notify you of new features and

software upgrades.

Keep the following information available in case you need to contact

SMART Technical Support.

Serial number: ___________________________________________________

Date of purchase: ___________________________________________________

FCC warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

Trademark notice

SMART Board, SMART Meeting Pro, the SMART logo and smarttech are trademarks or registered trademarks of SMART

Technologies ULC in the U.S. and/or other countries. Phillips is a registered trademark of Phillips Screw Company. All other

third-party product and company names may be trademarks of their respective owners.

transcribed, stored in a retrieval system or translated into any language in any form by any means without the prior written

consent of SMART Technologies ULC. Information in this manual is subject to change without notice and does not

represent a commitment on the part of SMART.

Portions of the software that ships with this product are copyrighted by Intel Corporation.

Portions of the software that ships with this product are copyrighted by ParaGraph, a business unit of Vadem.

Patent No. US5448263; US6141000; US6320597; US6326954; US6337681; US6540366; US6741267, US6747636;

US7151533; US7289113; US7499033; US7626577; US7687736; CA2058219; and CA2252302. Other patents pending.

Important information

Before you install and use your SMART Board™ 685ix Premium interactive

whiteboard system, read and understand the safety warnings and cautions in this

user’s guide. This information describes the safe and correct operation of your

SMART Board interactive whiteboard and its accessories and helps prevent injuries

and equipment damage.

If you own a SMART product other than a SMART Board 685ix Premium interactive

whiteboard system, refer to the installation manual for your product for relevant

warnings and maintenance instructions.

NOTE

In this document, the term “interactive whiteboard” refers to your interactive

whiteboard and its accessories and options.

Safety warnings and cautions

WARNINGS

• Failure to follow the installation instructions included with your interactive

whiteboard, or found in this guide, could result in personal injury or product

damage.

• Two people are required to safely mount your interactive whiteboard on a wall

mount because it could be too heavy for one person to safely maneuver.

When you lift your interactive whiteboard, you and your assistant should stand

on either side of the screen, supporting its weight at the bottom corners while

balancing the top with your other hands.

• Do not leave cables on the floor where they can be a tripping hazard. If you

must run a cable over the floor, lay it in a flat, straight line and secure it to the

floor with tape or a cable management strip of a contrasting color. Handle

cables carefully and avoid excessive bending.

• To reduce the risk of fire or electric shock, do not expose your SMART Board

interactive whiteboard to rain or moisture.

• There are no user-serviceable parts inside the pen tray. Only qualified

personnel should disassemble the pen tray’s printed circuit boards, and this

procedure must be done with proper electrostatic discharge (ESD) protection.

ii | IMPORTANT INFORMATION

CAUTIONS

• If you need to lean your interactive whiteboard against a wall before you

mount it, make sure that it remains in an upright position, resting on its pen

tray brackets, which are designed to sustain your interactive whiteboard’s

weight.

• Do not rest your interactive whiteboard on its side or on the top of its frame.

• Do not add any extra weight or excessive pressure to a wall-mounted

interactive whiteboard or its pen tray. SMART designed the brackets

to support only the weight of your interactive whiteboard during normal use.

• For operating safety and to avoid damage to your interactive whiteboard,

connect its USB connector only to a computer that has a USB compliant

interface and that bears the USB logo. In addition, the USB source computer

must be compliant with CSA/UL/EN 60950 and bear the CE mark and CSA

and/or UL mark(s) for CSA/UL 60950.

Other precautions

To ensure operating safety and to prevent product damage, observe the following

precautions.

• Don’t set up or use your interactive whiteboard in an area with excessive levels of

dust, humidity or smoke.

• If your SMART Board interactive whiteboard requires replacement parts,

make sure that the service technician uses replacement parts specified by

SMART Technologies or parts with the same characteristics as the original.

• Be aware that security cable locks aren’t designed to be a solid protection

measure because the lock can be torn out. However, potential thieves might be

reluctant to try to sell a product with a broken security cable lock hole, which

would readily identify it as a stolen item.

Contents

Important information ..............................................................................................i

Safety warnings and cautions...........................................................................i

Other precautions......................................................................................ii

Installing your SMART Board 685ix Premium interactive whiteboard system ...... 1

In this chapter ................................................................................................. 1

Before installing the SMART Board 685ix interactive whiteboard system ...... 2

Environmental requirements .................................................................... 2

Verify the installation of the FUWM-600 wall mount and the computer.... 2

Mounting your SMART Board 685ix interactive whiteboard system on a

FUWM-600 ..................................................................................................... 3

Important .................................................................................................. 3

Tools required .......................................................................................... 3

Installing the projector mount and wall mount bracket ............................. 4

Installing the ECP on the interactive whiteboard’s frame......................... 6

Installing the ECP and projector cables and the guest

computer harness .................................................................................... 6

Installing the computer cables.................................................................. 8

Installing SBA speakers and cables......................................................... 9

Installing additional cables ..................................................................... 10

Installing the UX60 projector .................................................................. 10

Securing the cables................................................................................ 12

Mounting the interactive whiteboard....................................................... 12

Completing your installation.......................................................................... 13

Aligning your interactive whiteboard with the projector .......................... 13

Attaching the ECP module ..................................................................... 13

Installing the pen tray ............................................................................. 14

iv | CONTENTS

Mounting the guest computer harness ................................................... 14

Orienting your interactive whiteboard ........................................................... 16

Setting orientation precision ................................................................... 16

Orienting the interactive whiteboard system .......................................... 17

Hardware environmental compliance .................................................................. 19

Waste Electrical and Electronic Equipment regulations (WEEE directive) ... 19

Restriction of Certain Hazardous Substances (RoHS directive)................... 19

Packaging ..................................................................................................... 19

China’s Electronic Information Products regulations .................................... 20

U.S. Consumer Product Safety Improvement Act ........................................ 20

Customer support................................................................................................ 21

Online information and support..................................................................... 21

Training......................................................................................................... 21

Technical support ......................................................................................... 21

Shipping and repair status ............................................................................ 21

General inquiries........................................................................................... 22

Warranty ....................................................................................................... 22

Registration................................................................................................... 22

Chapter 1

Installing your SMART Board 685ix

Premium interactive whiteboard

system

IMPORTANT

• Use the instructions in this guide to install your SMART Board 685 interactive

whiteboard, UX60 projector and extended control panel (ECP) on the fixed

unit wall mount 600 (FUWM-600).

• The instructions in your SMART Board 685 interactive whiteboard box do not

include instructions for installing the UX60 projector or ECP, and the

instructions in the SMART Board 685ix and SBD685 Interactive Whiteboard

System document do not show how to mount the interactive whiteboard or

projector on the wall mount.

• Refer to the FUWM-600 Computer installation instructions included with the

wall mount, document 99-01035-20, to install the wall mount.

In this chapter

Refer to these topics for information about mounting your SMART Board 685ix

interactive whiteboard system on the FUWM-600.

•Before installing the SMART Board 685ix interactive whiteboard system on

page 2

–Environmental requirements on page 2

–Verify the installation of the FUWM-600 wall mount and the computer on

page 2

•Mounting your SMART Board 685ix interactive whiteboard system on a

FUWM-600 on page 3

–Tools required on page 3

–Installing the projector mount and wall mount bracket on page 4

–Installing the ECP on the interactive whiteboard’s frame on page 6

2| INSTALLING YOUR SMART BOARD 685IX PREMIUM INTERACTIVE

WHITEBOARD SYSTEM

–Installing the ECP and projector cables and the guest computer harness on

page 6

–Installing the computer cables on page 8

–Installing SBA speakers and cables on page 9

–Installing additional cables on page 10

–Installing the UX60 projector on page 10

–Mounting the interactive whiteboard on page 12

•Completing your installation on page 13

–Aligning your interactive whiteboard with the projector on page 13

–Attaching the ECP module on page 13

–Installing the pen tray on page 14

–Mounting the guest computer harness on page 14

•Orienting your interactive whiteboard on page 16

–Setting orientation precision on page 16

–Orienting the interactive whiteboard system on page 17

Before installing the SMART Board 685ix

interactive whiteboard system

Environmental requirements

Before installing your system, refer to the environmental requirements in the SMART

Board™ 685ix Interactive Whiteboard System Configuration and User’s Guide,

document 99-00984-20, provided with your system.

Verify the installation of the FUWM-600 wall mount and the

computer

You must complete the installation of the FUWM-600 wall mount and the computer

before you can install the UX60 projector, the SMART Board 658 interactive

whiteboard and the ECP. Refer to the FUWM-600 Computer installation guide,

document 99-01035-20, provided with your FUWM-600 unit for more information.

3| INSTALLING YOUR SMART BOARD 685IX PREMIUM INTERACTIVE

WHITEBOARD SYSTEM

Mounting your SMART Board 685ix

interactive whiteboard system on a

FUWM-600

Important

Before mounting your interactive whiteboard system on the FUWM-600, carefully read

and observe the following instructions to ensure operating safety and to prevent

damage to your product.

WARNINGS

• Failure to follow these instructions could result in personal injury and product

damage

• Two people are required to safely mount your projector and interactive

whiteboard on the wall mount because they could be too heavy for one

person to safely maneuver. When you lift your interactive whiteboard, you and

your assistant should stand on either side of the screen, supporting its weight

at the bottom corners while balancing the top with your other hands.

• Do not leave cables on the floor where they can be a tripping hazard. If you

must run a cable over the floor, lay it in a flat, straight line and secure it to the

floor with tape or a cable management strip of a contrasting color. Handle

cables carefully and avoid excessive bending.

Tools required

To mount your interactive whiteboard on the FUWM-600 wall mount, you need the

following tools, which aren’t included with your interactive whiteboard system:

• a Phillips® No. 2

screwdriver (all screws

must be tightened by

hand)

• an electric drill with a

1/8" (3 mm) and a

1/4" (6 mm) drill bit

• a measuring tape

• a pencil

• a stepladder

×2

1/8" (3 mm)

and

1/4" (6 mm)

No. 2

×2

4| INSTALLING YOUR SMART BOARD 685IX PREMIUM INTERACTIVE

WHITEBOARD SYSTEM

CAUTION

• If you need to lean your interactive whiteboard against a wall before you

mount it, make sure that it remains in an upright position, resting on its pen

tray brackets, which are designed to sustain your interactive whiteboard’s

weight.

• Do not rest your interactive whiteboard on its side or on the top of its frame.

Installing the projector mount and wall mount bracket

To install the projector mount, use the screws labeled f (×7) shown on page 27 of the

FUWM-600 Computer installation guide.

To install the projector

mount

1. Using a Phillips No. 2 screwdriver, insert four screws into the four top-right holes

of the projector support leaving the screw heads 1/4" (6 mm) from its surface.

2. Place the projector mounting plate keyholes over the screws, and then tighten

the screws.

Projector

Mounting

Plate

Screws (×4) Keyholes (×4)

Projector

Support

Andere Handbücher für 685ix

Inhaltsverzeichnis

Andere SMART Board Interaktives Whiteboard Handbücher

SMART Board

SMART Board 880-SMP Bedienungsanleitung

SMART Board

SMART Board SB680-MP Bedienungsanleitung

SMART Board

SMART Board 685ix Bedienungsanleitung

SMART Board

SMART Board Board X800 Series Bedienungsanleitung

SMART Board

SMART Board D685ix Bedienungsanleitung

SMART Board

SMART Board M685ix2 Bedienungsanleitung

SMART Board

SMART Board 480iv2 Bedienungsanleitung

SMART Board

SMART Board 600 Series Bedienungsanleitung

SMART Board

SMART Board 3000i Bedienungsanleitung

SMART Board

SMART Board Interactive whiteboard Bedienungsanleitung

SMART Board

SMART Board Board X800i4 Bedienungsanleitung

SMART Board

SMART Board SmartBoard 600i2 Bedienungsanleitung

SMART Board

SMART Board 6052i Bedienungsanleitung

SMART Board

SMART Board 880i5-SMP Bedienungsanleitung

SMART Board

SMART Board 600i3 Bedienungsanleitung

SMART Board

SMART Board Board X800 Series Bedienungsanleitung

SMART Board

SMART Board In-WallRear Projection SMART Board Bedienungsanleitung

SMART Board

SMART Board 600i4 Bedienungsanleitung

SMART Board

SMART Board 600i Series Bedienerhandbuch

SMART Board

SMART Board 680iv Bedienungsanleitung

SMART Board

SMART Board M600ix3 Bedienungsanleitung

SMART Board

SMART Board SB880i5-SMP Bedienungsanleitung

SMART Board

SMART Board 800i5e-MP series Bedienungsanleitung

SMART Board

SMART Board Board 480 Bedienungsanleitung

Beliebte Interaktives Whiteboard Handbücher anderer Marken

SMART

SMART KAPP42 Bedienungsanleitung

HitachiSoft

HitachiSoft StarBoard FX-TRIO-88W Bedienungsanleitung

Buhl

Buhl LyteBoard Bedienungsanleitung

SMART

SMART SBX880 Bedienungsanleitung

Legamaster

Legamaster e-SCREEN ETX Bedienungsanleitung

Seneca

Seneca eno Bedienungsanleitung

BenQ

BenQ RP840G Bedienungsanleitung

SMART

SMART Sympodium IC-150 Bedienungsanleitung

Olivetti

Olivetti OLIBOARD Bedienungsanleitung

Turning Technologies

Turning Technologies MOBIVIEW Bedienungsanleitung

Panasonic

Panasonic UB-5335 Bedienungsanleitung

Dukane

Dukane ITP84 Bedienungsanleitung

Bretford

Bretford EDUIMS Konfigurationshandbuch

Panasonic

Panasonic Panaboard UB-5315 Bedienungsanleitung

Plus

Plus M-11S Bedienungsanleitung

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Bedienungsanleitung

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Bedienungsanleitung

AVer

AVer CP series Bedienungsanleitung