SMART Board SBID 8055i Bedienungsanleitung

SMARTBoard® 8055i

interactive flat panel

User’s guide

For models SBID 8055i, SBID 8055i-SMP and SBID 8055ie-SMP

Product registration

If you register your SMART product, we’ll notify you of new features and software upgrades.

Keep the following information available in case you need to contact SMARTSupport.

Serial number:

Date of purchase:

smarttech.com/kb/170177

FCC warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Trademark notice

SMARTBoard, SMART Ink, SMARTNotebook, SMARTMeetingPro, Bridgit, DViT, SMARTGoWire, smarttech, the SMART logo and all SMART taglines are

trademarks or registered trademarks of SMARTTechnologiesULC in the U.S. and/or other countries. Mac and Macintosh are trademarks of Apple Inc., registered in the

U.S. and other countries. Windows is either a registered trademark or a trademark of Microsoft Corporation in the U.S. and/or other countries. All third-party product and

company names may be trademarks of their respective owners.

form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to change without notice and does not represent a

commitment on the part of SMART.

This product and/or use thereof covered by one or more of the following U.S. patents.

www.smarttech.com/patents

08/2014

i smarttech.com/kb/170177

Important information for your

interactive flat panel

WARNING

lFailure to follow the installation instructions shipped with your SMART product could result in

personal injury and product damage which may not be covered by your warranty.

lDo not open or disassemble the SMART product. You risk electrical shock from the high

voltage inside the casing. Opening the casing also voids your warranty.

lDo not stand (or allow children to stand) on a chair to touch the surface of your SMART

product. Rather, mount the product at the appropriate height.

lTo reduce the risk of fire or electric shock, do not expose the SMART product to rain or

moisture.

lIf your SMART product requires replacement parts, make sure the service technician uses

replacement parts specified by SMARTTechnologies or parts with the same characteristics

as the original.

lEnsure that any cables extending across the floor to your SMART product are properly

bundled and marked to avoid a trip hazard.

lDo not insert objects inside the cabinet ventilation holes, because they could touch dangerous

voltage points and cause electric shock, fire or product damage which may not be covered by

your warranty.

lDo not place any heavy objects on the power cable. Damage to the cable could cause shock,

fire or product damage which may not be covered by your warranty.

lUseonly extension cords and outlets into which this product’s polarized plug can be fully

inserted.

lUse the power cable provided with this product. If a power cable is not supplied with this

product, please contact your supplier. Use only power cables that match the AC voltage of the

power outlet and that comply with your country’s safety standards.

lIf the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass fragments

with care when disposing of them.

I M P O R T A N T I N F O R M A T I O N F O R Y O U R I N T E R A C T I V E F L A T P A N E L

ii smarttech.com/kb/170177

lDo not move or mount the interactive flat panel by connecting rope or wire to its handles.

Because the interactive flat panel is heavy, rope, wire or handle failure could lead to personal

injury.

lUse only VESA®-approved mounting hardware.

lDisconnect all power cables for your interactive flat panel from the wall outlet and seek

assistance from qualified service personnel when any of the following occurs:

oThe power cable or plug is damaged

oLiquid is spilled into the interactive flat panel

oObjects fall into the interactive flat panel

oThe interactive flat panel is dropped

oStructural damage such as cracking occurs

oThe interactive flat panel behaves unexpectedly when you follow operating instructions

C A U T I O N

lBefore you clean your SMART product, shut down or disconnect the computer. Otherwise,

you may scramble the desktop icons or inadvertently activate applications when you wipe the

screen.

lAvoid setting up and using the SMART product in an area with excessive levels of dust,

humidity and smoke.

lMake sure an electrical socket is near your SMART product and remains easily accessible

during use.

lFor SMARTBoard 8055ie-SMPinteractive flat panel only: The external power supply needs to

meet the Limited Power Source (LPS) requirements of CSA/UL/IEC/EN 60950-1, when

required.

lThis SMART product should be used only with European TN and TT power distribution

systems.

It is not suitable for older, IT-type power distribution systems found in some European

countries. "This system (IT-type) is widely used isolated from earth, in some installations in

France, with impedance to earth, at 230/400V, and in Norway, with voltage limiter, neutral not

distributed, at 230V line-to-line." (IEC 60950:1999)

Contact qualified personnel if you’re uncertain of the type of power system available where

you’re installing your SMART product.

I M P O R T A N T I N F O R M A T I O N F O R Y O U R I N T E R A C T I V E F L A T P A N E L

iii smarttech.com/kb/170177

lYou must connect the USB cable that came with your SMARTBoard® interactive flat panel to

a computer that has a USB compliant interface and that bears the USB logo. In addition, the

USB source computer must be compliant with CSA/UL/EN 60950 and bear the CE mark and

CSA and/or UL Mark(s) for CSA/UL 60950. This is for operating safety and to avoid damage to

the SMARTBoard interactive flat panel.

v smarttech.com/kb/170177

Contents

Important information for your interactive flat panel i

Chapter 1: About your interactive flat panel 1

Feature highlights 2

Interactive flat panel components 3

Chapter 2: Installing your interactive flat panel 9

Environmental requirements 9

Wall-mounting your interactive flat panel 10

Chapter 3: Connecting computers and peripheral devices 13

Installing the speakers 14

Connecting a room control system 17

Connecting computers to your interactive flat panel 18

Connecting to power and computer 1 19

Installing computer 2 connection 20

Disabling the USB receptacle on the side terminal panel 22

Connecting peripheral devices to your interactive flat panel 23

Chapter 4: Installing SMART software 25

Installing SMARTMeetingPro software 26

Installing SMARTNotebook software 26

Chapter 5: Using your interactive flat panel 29

Turning on and turning off your interactive flat panel 30

Understanding presence detection 31

Using the infrared remote control 32

Getting started with your SMARTBoard interactive flat panel 36

Playing audio files on your interactive flat panel 47

Using the USB receptacle 48

Using the SMART Meeting Pro application 49

Chapter 6: Using guest laptops with your interactive flat panel 51

Connecting a guest laptop 51

Using a SMARTGoWire cable 52

Connecting computer 2 54

Chapter 7: Maintaining your interactive flat panel 55

Updating your SMART software and firmware 55

Calibrating your interactive flat panel 58

C O N T E N T S

vi smarttech.com/kb/170177

Orienting your interactive flat panel 59

Replacing a pen nib 59

Cleaning the screen 60

Cleaning the presence detection sensors 60

Cleaning the camera windows and reflective tape 61

Maintaining ventilation 61

Preventing condensation 62

Checking the interactive flat panel installation 62

Removing your interactive flat panel 62

Transporting your interactive flat panel 64

Chapter 8: Troubleshooting for your interactive flat panel 65

Resolving image issues 65

Resolving touch control and digital ink issues 70

Resolving audio issues 73

Resolving remote control issues 74

Troubleshooting presence detection 74

Resolving issues using the SMART Connection Wizard 76

Resolving issues using SMARTBoard Diagnostics 77

Appendix A: Adjusting video settings with the on-screen display menu 79

Changing settings in the OSD menu 79

Main menu settings 80

Appendix B: Hardware environmental compliance 85

Waste Electrical and Electronic Equipment regulations (WEEE directive) 85

Restriction of Certain Hazardous Substances (RoHS directive) 85

Batteries 85

Packaging 86

Index 87

Chapter 1

1 smarttech.com/kb/170177

Chapter 1: About your interactive flat panel

Feature highlights 2

Commercial-grade, touch-enabled flat panel 2

Elegant, sophisticated design 2

Software 2

Presence detection 2

Dual sketch capabilities 2

SMARTInk™ 2

Touch and gestures 3

Durable surface 3

Interactive flat panel components 3

Front view 3

LCD screen 3

Presence detection 4

Camera and reflective tape channel 4

Pen and eraser holders 4

Color select module 5

Front control panel 5

Infrared remote control 6

Left side view 6

Menu control panel 6

USB receptacle 6

Side terminal panel 6

Back view 6

Bottom terminal panel 7

Inside terminal panel 8

Speaker wire connections 8

Appliance 8

C H A P T E R 1

About your interactive flat panel

2 smarttech.com/kb/170177

Feature highlights

Commercial-grade, touch-enabled flat panel

Your SMARTBoard 8055i interactive flat panel features SMART’s proprietary DViT®

(DigitalVisionTouch) technology on an LCD screen which enables you to select, write and erase on

the interactive surface. It enables you to do everything you can do at your computer—open and close

applications, conference with others, create new documents or edit existing ones, visit websites,

play and manipulate video clips and more—just by touching the interactive surface. Two users can

also draw on the interactive surface at the same time, and you can use an array of gestures within

applications.

You can also write over any application in digital ink using a pen tray pen or your finger, and then save

these notes for future reference and distribution.

Elegant, sophisticated design

The professional design and crisp, eye-catching visuals of the SMARTBoard 8055i interactive flat

panel make it perfect for any high-end workspace.

Software

To use all the features of your interactive flat panel described in this guide, go to

smarttech.com/downloads and ensure that you have the latest version of SMART software and

SMART Product Drivers installed on your computer.

Presence detection

The interactive flat panel has two presence detection sensors on its frame that can detect people up

to 16' (5 m) away. When the sensors detect people in the room, the interactive flat panel turns on.

When the sensors no longer detect people in the room, the interactive flat panel turns off.

Dual sketch capabilities

Two people can each pick up a pen and draw on the interactive surface at the same time, providing a

higher degree of interactivity.

SMARTInk™

SMARTInk enables you to write and draw in digital ink over open applications, files, folders,

websites and any other open window on your computer. When you write outside the open windows on

your computer, a SMARTInk Note appears and you can write inside the note.

Andere Handbücher für SBID 8055i

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SMART Board Interaktives Whiteboard Handbücher

SMART Board

SMART Board SBM685ix2 Bedienungsanleitung

SMART Board

SMART Board Board 600 Series Bedienungsanleitung

SMART Board

SMART Board 600i4 Bedienungsanleitung

SMART Board

SMART Board SmartBoard 600i2 Bedienungsanleitung

SMART Board

SMART Board Interactive whiteboard Bedienungsanleitung

SMART Board

SMART Board SB880i5-SMP Bedienungsanleitung

SMART Board

SMART Board 480i6 Bedienungsanleitung

SMART Board

SMART Board 400 series Einrichtungshandbuch

SMART Board

SMART Board Board 600i5 Bedienungsanleitung

SMART Board

SMART Board Board 2000i Bedienungsanleitung

SMART Board

SMART Board 690 Bedienungsanleitung

SMART Board

SMART Board Board 480 Bedienungsanleitung

SMART Board

SMART Board 680iv Bedienungsanleitung

SMART Board

SMART Board 800ixe-MP Bedienungsanleitung

SMART Board

SMART Board 3000i Bedienungsanleitung

SMART Board

SMART Board 600i3 Bedienungsanleitung

SMART Board

SMART Board 8070i-G4-SMP Betriebsanleitung

SMART Board

SMART Board Board 600i6 Bedienungsanleitung

SMART Board

SMART Board SB660 64" Bedienungsanleitung

SMART Board

SMART Board 800i6 Bedienungsanleitung

SMART Board

SMART Board Board E70 Bedienungsanleitung

SMART Board

SMART Board Board 800ix2 Bedienungsanleitung

SMART Board

SMART Board Board E70 Bedienungsanleitung

SMART Board

SMART Board 880-SMP Bedienungsanleitung

Beliebte Interaktives Whiteboard Handbücher anderer Marken

SMART

SMART KAPP42 Bedienungsanleitung

Buhl

Buhl LyteBoard Bedienungsanleitung

SMART

SMART SBX880 Bedienungsanleitung

Legamaster

Legamaster e-SCREEN ETX Bedienungsanleitung

Seneca

Seneca eno Bedienungsanleitung

BenQ

BenQ RP840G Bedienungsanleitung

SMART

SMART Sympodium IC-150 Bedienungsanleitung

Olivetti

Olivetti OLIBOARD Bedienungsanleitung

Turning Technologies

Turning Technologies MOBIVIEW Bedienungsanleitung

Panasonic

Panasonic UB-5335 Bedienungsanleitung

Dukane

Dukane ITP84 Bedienungsanleitung

Bretford

Bretford EDUIMS Konfigurationshandbuch

Panasonic

Panasonic Panaboard UB-5315 Bedienungsanleitung

Plus

Plus M-11S Bedienungsanleitung

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Bedienungsanleitung

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Bedienungsanleitung

AVer

AVer CP series Bedienungsanleitung

Genee

Genee 56" Bedienungsanleitung