Page3 https://www.smart-material.com
EEL1500-1 User Manual V1.0
To ensure safe operation and to keep the operator and the product safe,
THE INFORMATION, CAUTIONS, AND WARNINGS IN THIS
MANUAL MUST BE HEEDED.
WARNING – WARNING STATEMENTS AND SYMBOLS IDENTIFY
CONDITIONS OR PRACTICES THAT COULD RESULT IN INJURY OR
LOSS OF LIFE.
CAUTION – CAUTION STATEMENTS AND SYMBOLS IDENTIFY
CONDITIONS OR PRACTICES THAT COULD RESULT IN DAMAGE TO
THIS PRODUCT OR OTHER PROPERTY.
REVIEW THE FOLLOWING SAFETY PRECAUTIONS TO AVOID INJURY AND
PREVENT DAMAGE TO THIS PRODUCT OR ANY PRODUCTS CONNECTED
TO IT. TO AVOID POTENTIAL HAZARD, USE THIS PRODUCT ONLY AS
SPECIFIED.
• Only qualied personnel should operate and make connections to this
unit.
• All connections including removal of any connections from the High
Voltage Output Connector must be done with the unit OFF and discon-
nected from the AC line source.
• To avoid shock hazard, electrocution, or re, observe all ratings and
markings on the product. Consult the User’s Manual for further safety
information before making connections to the product.
Make sure that attached cables are electrically and mechanically NOT
defective. Replace cables only with the high voltage amplier switched o.
Before removing the cables from the load, switch o the amplier and wait
at least 5 minutes until the load capacitors are discharged.
1. Safety Instructions AND Symbols
READ First
