Smarte MDX-8X8 Bedienungsanleitung

MDX MATRIX SERIES USER MANUAL V2.0

www.smart-e.co.uk

PAGE | 2

SYMBOLS

To ensure the safe and correct use of equipment, we use a range of symbols on the equipment and in the

manuals. These symbols demonstrate the risk of physical harm or possible damage to property for the user

or others and provide guidance on standards and disposal. Symbol indications and their meanings are as

follows. Please ensure that you correctly understand these instructions before reading the manual and

operating the equipment.

WARNING. This symbol is used to indicate where important instructions are provided to

ensure the correct operation of the equipment and user safety.

To prevent fire or shock hazards, do not expose this equipment to rain or moisture. Also,

do not use this equipment’s polarized plug with an extension cord receptacle or other

outlets unless the prongs can be fully inserted. Refrain from opening the cabinet as there

are high voltage components inside. Please refer all servicing to qualified service personnel.

This symbol warns user that uninsulated voltage within the unit may have sufficient

magnitude to cause an electric shock. Therefore, it is dangerous to make any kind of contact

with any part inside this unit.

This is a WiFi product, which may cause or be susceptible to radio interference. Users may

need to take additional measures to mitigate the interference.

This is a Bluetooth product, which may cause or be susceptible to radio interference. Users

may need to take additional measures to mitigate the interference.

This is an RF Radio product, which may cause or be susceptible to radio interference. Users

may need to take additional measures to mitigate the interference.

This is an Infrared product, which may cause or be susceptible to frequency interference.

Users may need to take additional measures to mitigate the interference.

This is a product which conforms to HDbaseT specification.

This product supports full High Definition 1080p resolution.

This product supports 4K Ultra High Definition resolution.

This product supports 3D definition display.

CE certification means that the product has reached the directive safety requirements

defined by the European Union.

SGS certification means that the product has reached the quality inspection standards

proposed by the world's largest quality standards body - SGS.

This product has passed the ISO9001:2000 international quality certification

EU-wide legislation, as implemented in each Member State, requires that waste electrical

and electronic products carrying the mark (left) must be disposed of separately from

normal household waste. This includes monitors and electrical accessories, such as signal

cables or power cords. When you need to dispose of your equipment, please follow the

guidance of your local authority, or ask the agent where you purchased the product. If you

wish to dispose of used electrical and electronic products outside the European Union,

please contact your local authority so as to comply with the correct disposal method.

MDX MATRIX SERIES USER MANUAL V2.0

www.smart-e.co.uk

PAGE | 3

WARNING

In order to ensure the reliable performance of the equipment and the safety of the user, please observe the following

matters during the process of installation, use and maintenance. :

INSTALLATION

Please do not use this product in the following places: places with high levels of dust or soot; places with high electric

conductivity; places with corrosive or combustible gas; places exposed to high temperature, condensation, wind or

rain; places subject to the occasion of vibration or impact.

When installing screw or wiring, make sure that metal scraps and wire heads will not fall into the screw shaft of the

equipment, as it could cause a fire, fault, or incorrect operation.

When the installation work is completed, ensure there is nothing left on the ventilated vents of the equipment, including

packaging items. Blocked vents may cause a fire, fault, incorrect operation.

Avoid wiring and inserting cable plugs in a charged state, otherwise it is easy to cause shock, or electrical damage.

The installation wiring should be strong reliable and earthed.

For installations in areas of high interference, the installer should choose shielded cable as the high frequency signal

input or output cable, so as to improve the anti-interference ability of the system.

Switch off and disconnect the equipment from all power sources prior to handling, installation or wiring, otherwise it

may cause electric shock or equipment damage.

This product grounds to earth by the grounding wires. To avoid electric shocks, grounding wires and the earth must

be linked together. Before the connection of input or output terminals, please make sure this product is correctly

grounded.

All terminals and wiring should be fully sheathed or otherwise covered before connecting the equipment to a power

supply so as to avoid cause electric shock.

OPERATION AND MAINTENANCE

Be sure to read this manual, and fully comply with the safety recommendations, before undertaking maintenance or

operation.

Do not touch terminals whilst the equipment is in a powered state, or it may cause a shock, incorrect operation.

Switch off and disconnect the equipment from all power sources prior to cleaning or tightening terminals or

connections. These operations can lead to electric shock in a live current state.

Switch off and disconnect the equipment from all power sources prior to the connection or disconnection of

communication signal cables, expansion modules, or other adapters, or it may cause damage to the equipment,

incorrect operation, or lead to electric shock in a live current state.

Do not dismantle the equipment, and avoid damaging the internal electrical components. Please refer all servicing to

qualified service personnel.

DISPOSAL

Be sure to dispose of the equipment in accordance with local regulations.

MDX MATRIX SERIES USER MANUAL V2.0

www.smart-e.co.uk

PAGE | 4

CONTENTS

1FUNCTION................................................................................................................................................5

2FEATURES................................................................................................................................................6

3SYSTEM COMPONENTS .........................................................................................................................7

3.1 MDX DIGITAL MODULAR MATRIX CHASSIS ........................................................................................... 7

3.2 MDX INPUT BLADES................................................................................................................................ 7

3.3 MDX OUTPUT BLADES ............................................................................................................................ 7

4CHASSIS PANEL DESCRIPTION ..............................................................................................................8

5INPUT / OUTPUT BLADES ....................................................................................................................13

5.1 INPUT BLADES....................................................................................................................................... 13

5.1.1

HDMI 4-WAY INPUT BLADE [MDX-IP4-HDMI]

.............................................................................. 13

5.1.2

DVI 4-WAY INPUT BLADE [MDX-IP4-DVI]

...................................................................................... 13

5.1.3

ANALOGUE 4-WAY INPUT BLADE [MDX-IP4-VGA]

....................................................................... 13

5.1.4

HDbaseT 4-WAY RECEIVER BLADE [MDX-RX4-HDBT]

................................................................. 14

5.1.5

FIBRE 4-WAY RECEIVER BLADE [MDX-RX4-MFB]

........................................................................ 14

5.1.6

HD/3G SDI InPUT BLADE (MDX-IP4-3GSDI)

................................................................................. 14

5.2 OUTPUT BLADES ................................................................................................................................... 15

5.2.1

HDMI 4-WAY OUTPUT BLADE [MDX-OP4-HDMI]

......................................................................... 15

5.2.2

DVI 4-WAY OUTPUT BLADE [MDX-OP4-DVI]

................................................................................. 15

5.2.3

ANALOGUE 4-WAY OUTPUT BLADE

............................................................................................. 15

5.2.4

HDbaseT 8-WAY TRANSMIT BLADE [MDX-TX4-HDBT]

............................................................... 16

5.2.5

FIBRE 8-WAY TRANSMIT BLADE [DX-TX4-FIBRE]

........................................................................ 16

5.2.6

HD/3G SDI OUTPUT BLADE (MDX-OP4-3GSDI)

........................................................................... 16

6APPLICATION DIAGRAM .......................................................................................................................17

7REMOTE CONTROL INTERFACES..........................................................................................................18

7.1 RS232 SERIAL CONTROL PORT INTERFACE ........................................................................................ 18

7.2 KEYPAD CONTROL PORT INTERFACE ................................................................................................... 18

7.3 TCP/IP CONTROL PORT INTERFACE .................................................................................................... 18

7.3.1

TCP/IP CONNECTION VIA SWITCH

............................................................................................... 18

7.3.2

TCP/IP CONNECTION DIRECT VIA CROSS-CONNECT

.................................................................. 18

8ACCESSORIES........................................................................................................................................19

8.1 MULTIFORMAT ANALOGUE VIDEO ADAPTER CABLE........................................................................... 19

9TECHNICAL SPECIFICATION .................................................................................................................20

9.1 MDX-8X8 /16X16 /36X36 /72X72 ............................................................................................... 20

9.2 MDX-IP4-HDMI /MDX-OP4-HDMI ........................................................................................................ 21

9.3 MDX-IP4-DVI /MDX-OP4-DVI ................................................................................................................ 21

9.4 MDX-IP4-VGA /MDX-OP4-VGA............................................................................................................. 22

9.5 MDX-RX4-HDBT /MDX-TX4-HDBT ...................................................................................................... 23

9.6 MDX-RX4-MFB /MDX-TX4-MFB .......................................................................................................... 24

9.7 MDX-IP4-3GSDI /MDX-OP4-3GSDI...................................................................................................... 24

MDX MATRIX SERIES USER MANUAL V2.0

www.smart-e.co.uk

PAGE | 5

1FUNCTION

The MDX Digital Modular Matrix 2 (DMM2) series from Smart-e is a range of rack-mountable modular

analogue/digital audiovisual matrix switches –providing a high performance solution to analogue/digital

matrix switching, with flexible configuration.

The MDX series comprises:

A range of modular matrix chassis, supporting 8x8, 16x16, 36x36 and 72x72 Input and Output

matrix switching

A range of Input Blades –each supporting 4x independent switchable input ports. Input Blades

are available for HDMI, DVI-D, Multi-format Analogue, HDBaseT, 3G-SDI and Fibre

A range of Output Blades –each supporting 4x independently switchable and scalable output

ports. Output Blades are available for HDMI, DVI-D, HDBaseT, 3G-SDI and Fibre

A range of accessories including active cooling fan-trays, ventilation panels, blank panels and a

redundant PSU

Input and Output Blades can be mixed & matched to provide the user with a diverse solution in a single unified

system.

All input/output Blade ports are fully independent, enabling full matrix switching capability between ports: one-

to-one, or one-to-many.

DMM2 delivers analogue/digital hybrid capability –enabling the input of multi-format analogue video

(VGA/RGBHV, Component-video YPbPr, S-video and Composite-video) sources to digital output (HDMI, DVI-D

and HDBaseT). Analogue video is digitised and up-scaled as required up to HD 1080p.

The HDMI and DVI Input Blades provide active-input ports, enabling the installer to connect extended cable

lengths ≤15-meters.

The HDBaseT Input Blades enable remote connectivity to source devices fitted with a Smart-e 4K-TX866

Transmitter (or other compliant HDBaseT transmitter) ≤100-meters over copper twisted pair cable. 24V

power is supplied from the matrix to the transmitter through the twisted pair cabling.

The HDBaseT Output Blades enable remote connectivity to display devices fitted with a Smart-e 4K-RX866

Receiver (or other compliant HDBaseT receiver) ≤100-meters over copper twisted pair cable. 24V power is

supplied from the matrix to the transmitter through the twisted pair cabling.

Digital signal processing technology ensures that signals are transported without distortion and the best

quality output is transmitted to the display device. Each output port can have its resolution set to match that

of the connected screen ensuring best quality picture and seamless switching between inputs.

The matrix switching of MDX Blade Inputs/Outputs fully supports bi-directional RS232 control and bi-

directional Infrared control pass-through enabling control connectivity between remote source and display

devices.

The MDX matrices can be controlled by a variety of methods including:

Remote control, via Key Pad accessory.

Remote control via RS232 serial command

Remote control via TCP/IP Ethernet

Control via Smart-iP Interface (separate 1U chassis)

MDX MATRIX SERIES USER MANUAL V2.0

www.smart-e.co.uk

PAGE | 6

2FEATURES

19-inch Rack Mountable Form Factor.

Chassis versions to support 8x8, 16x16, 36x36 and 72x72 matrices.

Modular design enables variety of Input / Output blades to be populated within the matrix chassis.

Input blades have 4x individually selectable input ports per blade.

Output blades have 4x individually selectable output ports per blade.

Supports multiple format input –

oHDMI

oDVI-D

oAnalogue (RGBHV, Component, Composite)

oHDBaseT

o3G-SDI

oFibre

Supports multiple format output –

oHDMI

oDVI-D

oAnalogue (RGBHV, Component, Composite)

oHDBaseT

o3G-SDI

oFibre

Full seamless digital switching between inputs/outputs.

Digitising and up-scaling of analogue input sources

Supports switch throughput of HDBaseT control (RS232 bi-directional, Infrared bi-directional)

Fast channel switching for DVI 1.0 and HDMI 1.4

HDMI HDCP compatible

HDMI CEC compliant

External control via RS232 serial.

External control via TCP/IP.

Supports control via Smart-e web interface software, Smart-iP.

Integrated cooling fan system (with manual activation temperature settings).

Dual redundant power supply.

MDX MATRIX SERIES USER MANUAL V2.0

www.smart-e.co.uk

PAGE | 7

3SYSTEM COMPONENTS

3.1 MDX DIGITAL MODULAR MATRIX CHASSIS

The following modular matrix chassis are available in the MDX series:

Model SKU

Input Blade

Slots

Max Inputs

Output Blade

Slots

Max Outputs

MDX-8X8

MDX-16X6

MDX-36X36

MDX-72X72

3.2 MDX INPUT BLADES

The following input blades are available in the MDX series:

Model SKU

Input ports

Port Type

MDX-IP4-HDMI

HDMI [Type-A] (Plus 3.5mm stereo jack for external audio

source)

MDX-IP4-DVI

DVI-D [DVI-D] (Plus 3.5mm stereo jack for external audio

source)

MDX-IP4-VGA

Analogue [HD15] (Plus 3.5mm stereo jack for external audio

source)

MDX-RX4-HDBT

HDbaseT

MDX-IP4-3GSDI

3G-SDI

MDX-RX4-MFB

Single Core Fibre

3.3 MDX OUTPUT BLADES

The following output blades are available in the MDX series:

Model SKU

Input ports

Port Type

MDX-OP4-HDMI

HDMI [Type-A] (Plus 3.5mm stereo jack providing de-embeded

analogue audio output)

MDX-OP4-DVI

DVI-D [DVI-D] (Plus 3.5mm stereo jack for analogue audio

output)

MDX-OP4-VGA

Analogue [HD15] (Plus 3.5mm stereo jack for analogue audio

output)

MDX-TX4-HDBT

HDbaseT

MDX-OP4-3GSDI

3G-SDI

MDX-TX4-MFB

Single Core Fibre

MDX MATRIX SERIES USER MANUAL V2.0

www.smart-e.co.uk

PAGE | 8

4CHASSIS PANEL DESCRIPTION

Front Panel | MDX-8x8

Rear Panel | MDX-8x8

Front Panel | MDX-16X16

Rear Panel | MDX-16X16

MDX MATRIX SERIES USER MANUAL V2.0

www.smart-e.co.uk

PAGE | 9

Front Panel | MDX-36X36

Rear Panel | MDX-36X36

MDX MATRIX SERIES USER MANUAL V2.0

www.smart-e.co.uk

PAGE | 10

Front Panel | MDX-72X72

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Smarte Matrix-Umschalter Handbücher

Smarte

Smarte S4K-8x8 Bedienungsanleitung

Smarte

Smarte 4K-8x8-L Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte