SMC Networks Barricade SMC7004ABR Bedienungsanleitung

Andere Handbücher für Barricade SMC7004ABR

4

Inhaltsverzeichnis

Andere SMC Networks Netzwerk-Router Handbücher

SMC Networks

SMC Networks FS5 - annexe 1 Bedienungsanleitung

SMC Networks

SMC Networks 7901BRA2 - annexe 1 Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMCBR21VPN Bedienungsanleitung

SMC Networks

SMC Networks BR14VPN - annexe 1 Bedienungsanleitung

SMC Networks

SMC Networks Barricade g SMC2804WBRP-G Bedienungsanleitung

SMC Networks

SMC Networks SMCGS10P-Smart Bedienungsanleitung

SMC Networks

SMC Networks SMC-EZ1026DT Bedienungsanleitung

SMC Networks

SMC Networks SMCBR14VPN Bedienungsanleitung

SMC Networks

SMC Networks SMC Barricade Plus SMC7004WFW Bedienungsanleitung

SMC Networks

SMC Networks Barricade Bedienungsanleitung

SMC Networks

SMC Networks SMC6405TX Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7904BRA Bedienungsanleitung

SMC Networks

SMC Networks TigerCard 1000 Bedienungsanleitung

SMC Networks

SMC Networks Barricade ADSL2/2+ Modem Router SMC7901BRA2 Bedienungsanleitung

SMC Networks

SMC Networks GS501 Bedienungsanleitung

SMC Networks

SMC Networks TigerSwitch SMC6709L2 Programmierhandbuch

SMC Networks

SMC Networks 7004VBR Bedienungsanleitung

SMC Networks

SMC Networks FS1601 Bedienungsanleitung

SMC Networks

SMC Networks EZ Connect SMC2870W Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC2804WBR38 Bedienungsanleitung

SMC Networks

SMC Networks SMC8612T2 Bedienungsanleitung

SMC Networks

SMC Networks 7901WBRA2 FICHE Bedienungsanleitung

SMC Networks

SMC Networks KER25U Bedienungsanleitung

SMC Networks

SMC Networks 8648T FICHE Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

SMC7004ABR Barricade Broadband Router

Installation Instructions

SPECIAL NOTE: Part D – Upgrading the Firmware in Your Barricade MUST occur

in ALL installations for multiple VPN sessions to work!!!

SPECIAL NOTE: Part F – Adjusting MTU Value. This procedure MUST be followed

in order to prevent chronic disconnections of the VPN tunnel!

Part A – General Setup

1. Open your Web browser and enter the following in the “Address” field:

http://192.168.2.1

2. The Barricade login screen will appear. Leave the password field empty and click on

“login”.

3. On the main page of the Barricade Web console, click “Setup”.

4. The Barricade’s automated setup process will take you through each step for setting up

your Barricade. Click “Enter” to start the process.

5. In the “Change Password” screen type lower-case “galileo” in the “New Password”

field. Confirm this entry by entering the lower-case “galileo” again in the “Re-enter

Password for Verification” field.

6. Click “Enter” to complete this step.

7. Select your time zone from the list and click “Enter”.

8. The LAN screen is where you configure the Local Area Network settings of your

Barricade. Unless you have an existing network with Domain information there is no

reason to change these settings. Click “Enter” to complete this step.

9. At this point the LAN side of your Barricade is configured. The next step is to

configure it for the Internet connection with the information provided by your ISP.

10. This screen has no information necessary for configuration. Please click on “Enter” to

complete this step.

11. The next few steps will be to configure the Barricade router for Internet access. There

are generally two different configurations used by most ISP’s.

•If you use a DSL Modem your ISP probably requires you to manually

enter your TCP/IP settings. If you have a DSL connection or if you know

you use a Static IP address please move to “Part B - Configuring Your

Barricade for Static IP Address”.

•If you connect to the Internet using a Cable Modem your ISP provider

probably used DHCP to issue an IP address to you. If you use a cable

modem or you know that the ISP uses dynamic IP address please move to

“Part C - Configuring Your Barricade for a Dynamic IP Address.

Part B – Configuring Your Barricade for Static IP Addressing.

1. Select “Static IP Address” and click on “More Configuration”

2. Enter the IP Address, subnet mask and gateway provided to you by your ISP in

the appropriate fields. Click “Enter” when finished.

A Domain Name Server (DNS) is like an index of names and Web addresses. If you type

a Web address into your browser, such as www.whitehouse.gov, a DNS server will find

that name in its index and find the matching IP address: 198.137.240.92. Most ISPs

provide a DNS server for speed and convenience. Since you are connecting to the

Internet with static IP settings, it is likely that your ISP also provided DNS server

addresses.

3. Enter the DNS server address(es) in the spaces provided. Click “Enter” when

finished.

Part C – Configuring Your Barricade for Dynamic IP Addressing.

1. Select “Dynamic IP Address” and Click “More Configuration.

2. If you have a Host name provided by your ISP enter it here and Click “Enter” to

continue.

3. Enter DNS Information as provided by your ISP and Click “Enter to finish the process.

Part D – Upgrading the Firmware in Your Barricade.

IN ORDER TO MAINTAIN MULTIPLE VPN TUNNELS YOU MUST update your

firmware to VERSION 140018 or later!

Upgrades for your Barricade Broadband are readily available on the Internet at

www.smc.com. They are stored in compressed format to minimize the time it takes to

download. The files take one of two forms.

1. “Zipped” format – this format requires you to have special software in order to extract

the update files.

2. “Self-extracting” format – this format does not require any special software in order to

extract the files.

The preferred form to download is “Self-extracting”. This will eliminate the necessity of

having special software to extract the files.

When you downloaded the latest update you execute the self-extracting file and it will

create a directory with the name “SMC” and place the extracted files in this directory.

The actual update file has the extension of .DLF This will be important later on in this

process.

Once you have completed the download and extraction process you can start the

Firmware Update Process.

1. To Upgrade the Firmware in your Barricade you must Login to the Barricade and

begin from the main menu screen. Select “Tools” from the menu.