SMC Networks Barricade SMC2404WBR Bedienungsanleitung

NEXT - Technical Specifications

BACK - Introduction NEXT - Cable Modem - WAN Type

Technical Specifications

Standards:

IEEE 802.3 10BaseT Ethernet

IEEE 802.3u 100BaseTX Fast Ethernet

IEEE 802.11b

WAN Interface:

10Base-T/100Base-TX

LAN Interfaces:

10Base-T/100Base-TX

3 RJ-45 ports

LAN data transfer rate is up to 10/20Mbps (10BaseT half/full duplex) or

100/200Mbps (100BaseTX half/full duplex)

Management:

Web-based management

Protocol Support:

TCP/IP, PPTP/L2TP/IPSec Passthrough (VPN)

DNS

SNTP

NAT

HTTP

DHCP

Point-to-Point Protocol

PPP Internet Control Protocol

PPP Authentication Control

Internet Sharing Methods:

Static IP

Dynamic IP

PPPoE

Advanced Features:

Dynamic IP Address Configuration - DHCP, DNS

Firewall - Client Privileges, hacker prevention, logging

Virtual Server via NAT and NAPT

Virtual Private Network - IPSec and PPTP pass-through

Intrusion Detection, Email Alerting, Parental Control

Indicator Panel:

PWR (Power), WLAN (Wireless LAN), WAN (Wide Area Network)

Link Lights - LAN1, LAN2, LAN3 (10/100 lights are solid when linked at 100,

and off when linked at 10)

Wireless Data Rates (Auto-Sensing/Automatic Fall-back):

1/2/5.5/11/22Mbps

Data Modulation Techniques:

BPSK (1 Mbps), QPSK (2 Mbps), CCK (5.5/11 Mbps), PBCC (5.5/11/22 Mbps)

Media Access Protocol:

CSMA/CA (Collision Avoidance) with ACK

RF Frequency:

2471 MHz - 2497 MHz (Japan Band)

2400 MHz - 2483 MHz (North America, Europe, and extended Japan Band)

2455 MHz - 2475 MHz (Spain)

2446.5 MHz - 2483.5 MHz (France)

Operating Channel:

11 Channels (US, Canada)

13 Channels (Europe)

14 Channels (Japan)

Wired Equivalent Privacy (WEP) Algorithm:

64/128/256-bit RC4

Input Power:

5V 2.5A

Firmware Upgrade:

Via Web Interface

Warranty:

Limited Lifetime

Technical Support

You can download and upgrade to the latest version of software from SMC's

Technical Support site,

http://www.smc.com/index.cfm?action=tech_support_support_tools. For more

technical information, please refer to the link listed below or contact SMC

Technical Support Department at 1-800-SMC-4YOU.

Complete warranty information for all SMC products is available on SMC's

website. Please register this product and upgrade the product

warranty at www.smc.com

BACK - Technical Specifications NEXT - Router Connection Type - DSL

Cable Modem

Most users who have cable modems are set up for DHCP. These include Internet

Service Providers (ISP) such as Comcast, AT&T Broadband and Rogers Cable

service. At most, your ISP may have contacted you to register the Media Access

Control (MAC) address of your network interface card (NIC) in the machine. A

cable modem is used to connect a computer to a cable service that provides

Internet access. Cable modems can dramatically increase the bandwidth between

the user's computer and the Internet service provider. However, cable service is a

shared mode of Internet connectivity, and thus the speed will vary depending on

how many people on that cable segment are using the Internet at the same time.

The cable modem transmission system (CMTS) is responsible for converting

radio frequency (RF) signals into data packets for the Internet.

Setup Wizard for Cable Connection

BACK – Router Connection Type - Cable NEXT - Router Connection Type - Static IP

DSL Modem

Most users with DSL modems require a username and password in order to log

onto the Internet. These include Internet Service Providers (ISP) such as PacBell,

Earthlink or Sympatico. The Digital Subscriber Line (DSL) is a technology that

increases the digital capacity of PSTN lines. DSL is different from ISDN in that it

provides an “always-on” connection. ADSL (Asymmetric-DSL) and SDSL

(Symmetric-DSL) are the two main types of DSL service provided.

Setup Wizard for DSL Connection

BACK – Router Connection Type - DSL NEXT - Connect Your Barricade

Static (Fixed) IP Address

If you have been provided a Fixed IP from your Internet Service Provider, they

should have given you the IP Address, Subnet Mask, Gateway, and DNS

Addresses. In this case, you can configure your broadband router with a Static IP

on the WAN interface. This IP address is constant and the ISP will not change it.

If you are unsure of any of the necessary IP Addresses, please contact your ISP

before proceeding with the installation of the router.

Setup Wizard for Static IP Connection

BACK – Router - Static IP Connection NEXT – Computer Configuration - Configuring your

Connecting To Your SMC2404WBR 11/22 Mbps Wireless Broadband

Router

There are 3 major segments that you will connect together: Modem to

Router to Computer.

Figure 1.0 The picture above illustrates the hardware needed to set up your

network. (Shown above from left to right is the SM8002CM and

SMC2404WBR. The picture of the monitor symbolizes the connection coming

from your router to your computer.)

Step 1: You must connect your computer to the router using the RJ45 cable that

came with the router. Then connect the modem to the WAN port of the router

using the cable that came with your modem. Make sure that the BNC connection

to the cable modem is secure at all times. Plug the appropriate power adapter into

the router.

Step 2: Double-check to be sure that the RJ45 connection coming from the

modem connects to the WAN port at the back of the router. Once the RJ45

connector is plugged into the WAN port, you should hear it click into the RJ45

port. This will indicate that the connection is firmly attached. Then look at the

front of your router, and you will see a WAN LED. If this light is lit, it will

indicate that you have a connection coming from your modem. This is vital to

successfully establishing an internet connection through the router.

Troubleshooting Tip 1: If this light does not come on, you should check if your

cables are firmly inserted. Also try switching cables as well. If the light still does

not appear, try using a crossover RJ45 cable.

Step 3: You can plug from ports 1, 2, 3 or 4 into your network card. Double-

check to be sure that the RJ45 connection coming from that particular port is

firmly inserted into your network card. Once this connection is locked in, you

will see a link light on the router indicating that there is a connection between

your computer and router.

Troubleshooting Tip 2: If you do not see a link light, make sure that the

connection coming from your computer is not loose. Try switching the cables as

well.

Troubleshooting Tip 3: Try using a different port on the router if you continue to

have problems getting a link light on the first port you have tried. Also check your

operating system and verify that your network card is working properly. You can

check this through the Device Manager.

Step 4: Now that the link lights indicate all connections are valid, you are ready

to begin configuring your PC.

BACK - Connect Your Barricade NEXT – Browser Settings - Main Page

Configuring your Personal Computer (PC)

This section will assist you in configuring your browser and

computer settings.

Before you start configuring your PC, make sure that you have

properly connected your Modem to the WAN port of the Wireless

Barricade Turbo router. The router should then be connected to

your computer.

Andere Handbücher für Barricade SMC2404WBR

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SMC Networks WLAN-Router Handbücher

SMC Networks

SMC Networks SMC7004WFW Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMCBR14UP Bedienungsanleitung

SMC Networks

SMC Networks THE BARRICADE SMCWBR14S-N4 Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N - annexe 1 Bedienungsanleitung

SMC Networks

SMC Networks WBR14S-N3 - annexe 1 Bedienungsanleitung

SMC Networks

SMC Networks Barricade Plus Bedienungsanleitung

SMC Networks

SMC Networks WBR14S-N FICHE Installationsanleitung

SMC Networks

SMC Networks Barricade SMC7004ABR V.2 Bedienungsanleitung

SMC Networks

SMC Networks SMCWBR14-GM Barricade Bedienungsanleitung

SMC Networks

SMC Networks 7904WBRA2 Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMCWBR14S-N2 Bedienungsanleitung

SMC Networks

SMC Networks WBR14-G2 Bedienungsanleitung

SMC Networks

SMC Networks SMC7004WFW Bedienungsanleitung

SMC Networks

SMC Networks WBR14-G2 Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC7904WBRA Bedienungsanleitung

SMC Networks

SMC Networks SMC7904WBRA-N2 Bedienungsanleitung

SMC Networks

SMC Networks Barricade SMC2804WBR Bedienungsanleitung

SMC Networks

SMC Networks BARRICADETM SMCWGBR14-N2 Bedienungsanleitung

SMC Networks

SMC Networks Barricade g SMC7804WBRA Bedienungsanleitung

SMC Networks

SMC Networks Barricade g SMC7804WBRA Bedienungsanleitung

SMC Networks

SMC Networks barricade SMCWBR14-G2 Bedienungsanleitung

SMC Networks

SMC Networks WBR14-GM Bedienungsanleitung

SMC Networks

SMC Networks SMCWBR14S-N5 Bedienungsanleitung

SMC Networks

SMC Networks 7901BRA4 - annexe 1 Bedienungsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

Draytek

Draytek Vigor2120 Series Bedienungsanleitung