8
•Keep the device dry. Precipitation, humidity and
all types of moisture may contain minerals that
will corrode electronic circuits. If device does get
wet, remove the battery and allow the device to
dry completely before replacing.
•Do not use or store the tool in dusty, or dirty areas.
Keep the electronic components clean.
•Do not store the device in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt
certain plastics.
•Do not attempt to open the device other than
instructed in this guide.
•Do not drop, knock or shake the device. Rough
handling can break internal circuit boards
and mechanics.
•Do not use harsh chemicals, cleaning solvent or
strong detergent to clean the device. Do not paint
the device. Paint can clog the moving parts and
prevent proper operation.
•Do not touch the main display with hard or angular
material. Objects like earrings or jewelry may
scratch the display.
•Use a soft, clean and dry cloth to clean the device.
•Use only the supplied antenna. Unauthorized
antennas, modications or attachments could
damage the device and may violate regulations
governing radio devices.
•The power connection cord is NOT COMPATIBLE
with a USB interface. Please do not use with other
USB devices.
All of the above suggestions apply equally to your
device, battery or any enhancements. If device is
not working properly, contact Standard Motor
Products, Inc.
12. RF CERTIFICATION
13. WARRANTY
14. QUESTIONS
This device meets guidelines for exposure to
radio waves.
This device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to
radio waves recommended by international
guidelines developed by the independent scientic
organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
For further information see ICNIRP “guidelines for
limiting exposure to time-varying electric, magnetic
and electromagnetic eld (up to 300GHz)” or contact
Standard Motor Products, Inc.
The SAR value for this device is less than 5W/kg.
This value is the reference level for general public
exposure to time varying electric and magnetic
elds (unperturbed rms values) for the 3-150 KHz
frequency range.
Standard Motor Products, Inc. products are guaranteed
from material defects for 365 days after the date
of purchase. If the product fails under normal
circumstances within the rst year, Standard Motor
Products, Inc. will repair or replace the product.
Product will not be replaced or repaired if damaged
from misuse or incorrect application. To obtain
repair or replacement of the product under warranty,
please contact Standard Motor Products, Inc. Proof
of purchase and date of purchase are required to
validate the warranty claim.
Standard Motor Products, Inc. is not liable for any
direct or consequential loss or property damage
arising from use of product.
Any questions pertaining to warranty information
or other questions not answered in the preceding
pages can be answered by the TechSmart®place
of purchase or by Standard Motor Products, Inc.’s
Customer Service.
1-888-621-8767 (USA)
1-877-666-5325 (Canada)
For additional information on TPMS and TechSmart®
products, visit
www.QWIKSENSOR.com
Thank you for your purchase
and enjoy your new
TechSmart®T55003
Clone-able Tool!
Warranty does not cover tire valves or
screws for tire valves. The tire valves
and screws need to be replaced when
rotating tires, changing tires or changing
the TPMS sensors. If installing/reinstalling
a TPMS sensor, new valves and screws
should be used.
We recommend that you only use
Standard Motor Products, Inc. replacement
parts. Other brands will not function
properly with this tool.
TS10885
