Soleus Air LX-140 Bedienungsanleitung

-Cooling

-Heating Pump

-Dehumidifying

-Fan

Please read this owner’s

Manual carefully before

operating the unit.

TABLE OF CONTENTS

INTRODUCTION…………………………………………………………………

IMPORTANT SAFEGUARDS………………………………………………..….2

PACKAGE CONTAINS…………………………………………………………..2

NAMES OF PARTS……………………………………………………………….3

INSTALLATION BEFORE USE……………………………..….………………4

CONTROL PANEL AND VFD DISPLAY………….…..……………………….5

CONTROL PANEL

FUNCTIONS……………………………………………….6

OPERATION USING CONTROL PANEL………………………...….…..……7

OPERATION USING REMOTE CONTROLLER…………………………..…9

MAINTENANCE……………..……………………………….…..………………9

TECHNICAL

SPECIFICATIONS…………………………………….….…….10

DISCLAIMER……………………………………………………………………11

CONTACT INFORMATION…………………………………...………………11

WARRANTY……………………………………….………………………………….….…12

INSTALLATION OF THE VENTING KIT………….……………………….…….13

INTRODUCTION

Thank you for purchasing Soleus Air LX-140 portable air-conditioner. This unit is designed for

improving living and working comfort by providing cooling, heating, dehumidifying and fan

functions only with a minimum installation required. With its quite operation and attractive

design, you will enjoy the convenience and comfort that this unit provides for many years to come.

The unit also has power outage auto reset function. The unit automatically returns to the original

setting after a power outage.

IMPORTANT SAFEGUARDS

Before you use your portable air conditioner, please read this operation manual carefully.

1) Never use or store gasoline or other flammable vapor or liquid near this unit.

2) Maintain at least 10” (25 CM) clearance space from this unit. Avoid air inlet or

outlet grilles from being covered or closed off.

b) The power supply must be properly grounded.

c) Do not use an adapter plug or extension cord.

5) Do not use the unit in the immediate surroundings of a bath, a shower or a

swimming pool.

6) Do not let children play near this unit.

PACKAGE CONTAINS:

Mobile Air Conditioner

Exhaust Duct (2)

Unit Terminal End (2)

Window Kit Adapter (2)

Remote Controller

AAA Batteries (2)

Window Kit - 4 Sliding Panels

Exhaust Outlet Wall Covers (2)

Filter Outlet Panel Cover and Solid Panel Cover (2)

User Manual

NAMES OF PARTS

Exhaust Duct

Window Kits

INSTALLATION BEFORE USE

Binary Hose Design

Note: When you using the unit for cooling, heating or as a dehumidifier, the outdoor air

must be directed to the unit and the hot air must be exhausted out of the room to complete

the air exchange. When the unit is operating on fan mode, no outdoor air exchange takes

place. You do not need to hookup the window kits and exhaust hose when you use the unit

as a fan.

1) Single Hose Installation: (1 exhaust duct required)

For fast spot cooling, use this installation.

a) Pull out of both ends of the exhaust ducts for approximately 6”.

b) Screw clockwise the exhaust ducts with one end to the terminal end and other end

to the window kit adapter.

c) Remove only one exhaust outlet wall cover from the back of the unit by screwing

the covers counter-clockwise before lifting it up and leave the second wall cover

securely closed.

d) Mount terminal ends of the exhaust hose to the unit.

Figure A. Single hose, Outlet Panel

e) Insert Filter Outlet Panel Cover (Figure A.) to allow air to flow out panel.

f) Open window or sliding door for approximately 5 inches (130 mm)

g) Adjust the length of the window kit to the same length of the window or the sliding

door. For single hose select the panel with one hole (Figure B.)

Figure B

Use all three panels if necessary. Cut the window piece as needed to fit the length

of your window or sliding door. Make sure the single hole panel is on the main

piece is not covered by other pieces.

g) Place the window kit to the window or sliding door. Close the window or door as

far as it goes.

h) Adjust the length of exhaust hose and affix the window kid adapter onto the hole on

the window kit.

2) Dual Hose installation: (2 exhaust ducts required)

Use this installation for maximum cooling and heating for a room.

a) Pull out of both ends of the exhaust ducts for approximately 6”.

b) Screw clockwise the exhaust ducts with one end to the terminal end and other end

to the window kit adapter.

c) Remove exhaust outlet wall covers from the back of the unit by screwing the covers

counter-clockwise before lifting them up.

d) Mount terminal ends of the exhaust hoses to the unit.

Figure C. dual hose solid panel

e) Insert solid panel (Figure C.) to allow air to flow out exhaust hose not panel.

f) Open window or sliding door for approximately 5 inches (130 mm)

g) Adjust the length of the window kit to the same length of the window or the sliding

door. Use all three panels if necessary. Cut the window piece as needed to fit the

length of your window or sliding door. For dual hose select the panel with two

holes. (Figure D.) Make sure that both holes on the main piece are not covered by

other pieces.

Figure D.

h) Place the window kit to the window or sliding door. Close the window or door as

far as it goes.

i) Adjust the lengths of exhaust hose and affix the window kid adapters onto the holes on the window kit.

NOTE: When using the window kit on a window or sliding door it will cause the window

or sliding door not to be properly closed and locked. Additional security measurements

should be taken

Wall Mount

1) Do not use window kit adapter. Mount the one end of the exhaust ducts onto holes

of 5” on the wall.

2) Using exhaust outlet wall covers to cover the holes in the wall when the unit is not

in use.

NOTE: In order to increase the efficiency, the exhaust ducts should be keeping as short and

straight as possible. It is not recommended to increase the manufacturer’s length of the

exhaust hose. This may impede or damage the unit.

CONTROL PANEL AND VFD DISPLAY

CONTROL PANEL

VFD DISPLAY

(Vacuum Fluorescent Display)

Control Panel Functions

1) Power On/Off Control

Starts or Stops the Unit

2) Mode Control

Select the functions of the unit for:

Fan Mode

Air Conditioning Mode

Heating Mode

Dehumidifying Mode

Auto Mode

3) Fan Speed Control

Select the fan speed for:

High

Medium

Low

The fan speed can be visually distinguished by the speed of the digital air segments progressing

out from the windmill fan image on the VFD display.

4) Temperature

Select the desired temperature by pressing either ∧or ∨key when using the unit in cooling or

heating function. The VFD flashes to display the desired temperature during the setting. The

VFD displays set temperature when it is not at temperature setting mode.

The VFD display either in Celsius or Fahrenheit. Press the oF /0C button on the control panel to

select desired temperature.

5) Timer

To program the timer, press Timer On key until the VFD display shows a flashing “ ”.

Pressing either /\ or \/ keys to change the clock to the desired time for the unit being turned on.

Press Timer Off key and the VFD display will show a flashing “ ”. Pressing either /\

or \/ keys to change the clock to the desired time for the unit being turned off.

The light will flash for 3 seconds to activate the timer you programmed.

6) oF / 0C

To switch from Celsius to Fahrenheit press the display button labeledoF or 0C for desired

temperature setting.

OPERATION USING CONTROL PANEL

1) Cooling Operation

a) Install the exhaust ducts properly.

b) Plug the Power Cord to the power outlet.

c) Turn on the unit by pressing the On/Off Button on the control panel.

d) Press Mode Button until “ ” appears on the VFD display

e) Press the button ∧or ∨until the desired room temperature appears on the

VFD. The temperature ranges from 61oF-88 oF (16 oC-31 0C).

f) Select the fan speed by pressing the Fan Button.

NOTE: During hot days, the unit will cool off the room most efficiently by setting the temperature at the

lowest and the fan speed at the highest. Reducing the length of the exhaust duct and insulating the

exhaust duct and keeping direct sunlight to a minimum will also improve the cooling efficiency.

2) Dehumidifying Operation

a) Install the exhaust ducts properly

b) Plug the Power Cord to the power outlet.

c) Turn on the unit by pressing the On/Off Button on the control panel.

d) Press the Mode Button until the “ ” appears on the VFD display.

NOTE: The unit operates at low fan speed during dehumidifying. The unit cools room slightly during

the dehumidification.

Keep the windows and the doors closed to aid the effectiveness of the unit in removing the moisture from

the room.

NOTE: The unit will not perform dehumidification when the room temperature is lower than 61 degree.

3) Fan Operation

a) Plug the Power Cord to the power outlet.

b) Turn on the unit by pressing the On/Off Button on the control panel.

c) Press the Mode Button until “ ” appears on the VFD display.

d) Select the fan speed by pressing the Fan Button.

NOTE: When the unit is running on fan mode, the exhaust duct is inoperative and is not required.

4) Heating Operation

a) Plug the Power Cord to the power outlet.

b) Turn on the unit by pressing the On/Off Button on the control panel.

c) Press the Mode Button until “ “ appears on the VFD display.

d) Press the button ∧or ∨until the desired room temperature appears on the

VFD. The temperature ranges from 61 o F-88 o F (16 oC-31 oC).

e) Select the fan speed by pressing the Fan button. It is recommended to use

the low fan

NOTE: When beginning heat mode, the unit will shut off for 3-5 minutes then resume to heating

operation.

5) Auto Operation

a) Install the exhaust ducts properly

b) Plug the Power Cord to the power outlet.

Andere Handbücher für LX-140

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air KY-32H Bedienungsanleitung

Soleus Air

Soleus Air FE-08BA Bedienungsanleitung

Soleus Air

Soleus Air PSR-06-01 Bedienungsanleitung

Soleus Air

Soleus Air PAC12 Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-25HCE Bedienungsanleitung

Soleus Air

Soleus Air GM-TTW-10HC Bedienungsanleitung

Soleus Air

Soleus Air GH-PAC-12E1 Bedienungsanleitung

Soleus Air

Soleus Air PSH-08-01 Bedienungsanleitung

Soleus Air

Soleus Air PH3-09R Bedienungsanleitung

Soleus Air

Soleus Air PS08-01 Bedienungsanleitung

Soleus Air

Soleus Air PH1-12R-03 Bedienungsanleitung

Soleus Air

Soleus Air TTWM1-10-01 Bedienungsanleitung

Soleus Air

Soleus Air WS2-06E-201 Bedienungsanleitung

Soleus Air

Soleus Air PE4-11R-03 Bedienungsanleitung

Soleus Air

Soleus Air MAC-8000 Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-10ESE-F Bedienungsanleitung

Soleus Air

Soleus Air PH5-13R-32D Bedienungsanleitung

Soleus Air

Soleus Air PE2-07R-62 Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-12 Bedienungsanleitung

Soleus Air

Soleus Air KY-320 Bedienungsanleitung

Soleus Air

Soleus Air 3119233 Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-10E2 Bedienungsanleitung

Soleus Air

Soleus Air WM1-12E2-01 Bedienungsanleitung

Soleus Air

Soleus Air 3046364 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung