Soleus Air GM-TTW-10HC Bedienungsanleitung

Electronic Through the Wall Air Conditioner

Operating Instructions

Models

GM-TTW-10HC

GM-TTW-12HC

GM-TTW-14HC

Thank you for choosing a Soleus Air powered by Gree Air Conditioner. This owner’s manual will

provide you with valuable information necessary for the proper care and maintenance of your new

product. Please take a few moments to thoroughly read the instructions and familiarize yourself with

all the operational aspects of your new air conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT SAFETY INSTRUCTIONS

Before installing and using your air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference. Your safety and the safety of others is very important to

us. Please pay attention to all safety messages outlined in this owner’s manual.

WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow

the following basic precautions:

This is a safety alert symbol.

This symbol alerts you to potential hazards that can harm you or others or even cause

death.

All safety messages will directly follow the safety alert symbol and/or the words

“DANGER” or “WARNING”.

Failure to immediately follow these

instructions may cause serious injury

or even death.

All Safety messages alert you of potential hazards, how to reduce the chance of injury,

and what can happen if instructions are not followed correctly.

x Plug into a grounded 3 prong outlet.

x Do not remove the ground prong.

x Do not use a plug adapter.

x Do not use an extension cord.

x Unplug the air conditioner before servicing

x Use two or more people to move and install the air

conditioner

Recommended Ground Method

For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a 3 prong power

supply cord with a grounded plug. To minimize the possibility of electrical shock, the cord must be plugged into a 3 prong

outlet and grounded in accordance with all local codes and ordinances. If a 3 prong outlet is not available, it is the cus-

tomer’s responsibility to have a properly grounded 3 prong outlet installed by a qualified electrician.

LCDI Power Cord and Plug - NEMA 6-20P

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as

required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination

on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the nominal current

leakage between the cord shield and either load conductor exceeds a predetermined value. The cord will remain de-

energized until the devise has been manually reset. This is intended to reduce the risk of a fire in the power cord or

combustible materials nearby. The cord shields are not grounded and they must be considered a shock hazards if

exposed. The cord shield must not be connected to ground or to any exposed metal.

The test and reset buttons on the LCDI Plug are used to check if

the plug is functioning properly. To test the plug:

1. Plug power cord into a wall outlet, the power light will turn

on.

2. Press the TEST Button, the circuit should trip and cut all

power to the air conditioner. The power light will turn off.

3. Press the RESET button for use. The power light will turn

back on.

If a test is performed and the indicator light remains ON prior to

pressing RESET, current leakage has been detected. Do not

use the air conditioner or attempt to reset the LCDI Plug. Con-

tact Customer Service for troubleshooting recommendations.

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove the ground prong.

Do not use an adapter

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock

The electrical ratings for your air conditioner are listed on the model and serial

number label located on the front left side of the unit (when facing the front).

Specific electrical requirements are listed in the chart below. Follow the

requirements below for the type of plug on the power supply cord.

Power Supply Cord

NEMA 6-20P

It is the customer’s responsibility:

• To contact a qualified electrician

• To assure that the electrical installation is adequate

and in conformance with the National Electrical Code,

ANSI/NFPA 70 - latest edition, and all local codes and

ordinances.

Copies of the standards listed may be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this air conditioner

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read

product labels for flammability and other warnings.

ACCIDENT PREVENTION

To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner, follow basic precautions,

including the following:

x Be sure the electrical service is adequate for the model you have chosen. This information can be found on the se-

rial number plate located on the side of the cabinet or behind the grille.

x If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass prior to in-

stallation. If the windows is a triple-track type with a screen panel included, remove the screen completely before

installation.

x Be sure the air conditioner has been securely and correctly installed according to the installation instructions pro-

vided with this manual. Save this manual and the installation instructions for future use when removing and reinstall-

ing the unit.

x When handling the air conditioner, be careful to avoid cuts form sharp metal fins on the front and rear coils.

DISCLAIMER

ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE

PRESENTATION OF THE MANUFACTURER. SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT

TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.

SPECIFICATIONS

x Noise level is measured at a distance of 3.28 ft away from the front of the unit in cooling mode.

x Power consumption is measured when the fan runs at the highest speed setting.

x These specifications are for reference only. For actual data, please refer to the rating label on the unit.

NORMAL OPERATING SOUNDS

Model GM-TTW-10HC GM-TTW-12HC GM-TTW-14HC

Power Supply (Ph/V/Hz) 1/230-208/60 1/230-208/60 1/230-208/60

Dehumidifier Capacity (Pints/Day) 60 91.6 100

Rated Cooling Capacity (BTU/Hr) 10,000/9,700 12,000/11,700 14,000/13,600

Rated Heating Capacity (BTU/Hr) 10,600/8,600 10,600/8,600 10,600/8,600

Cooling Power Input (Watts) 1,060/1,030 1,280/1,240 1,650/1,600

Heating Power Input (Watts) 3,450/2,800 3,450/2,800 3,450/2,800

Rated Current Cooling (Amperage) 4.8/5.1 6.0/6.5 7.0/7.5

Rated Current Heating (Amperage) 15/13.6 15.0/13.6 15/13.6

EER (Cooling) 9.4 9.4 8.5

Noise Level Indoor/Outdoor [dB(A)] 59/70 59/70 59/57

Air Flow (CFM) 290 300 320

Product Dimensions WxHxD (Inches) 24 x 14.5 x 20.625 24 x 14.5 x 20.625 24 x 14.5 x 20.625

Product Weight (LBS) 79.4 81.6 84

Refrigerant R-410A R-410A R-410A

Before you start using your air conditioner, please familiarize yourself with the control panel and remote control the func-

tions of each. This air conditioner can be controlled by the control panel (touch pad) or the included remote control.

OPERATING YOUR AIR CONDITIONER

CONTROL PANEL (TOUCH PAD for cool only model)

LOWERS

TEMPERATURE

OR TIME

TEMPERATURE

OR TIME

RAISES

SETS FAN SPEED

SETS MODE

SLEEP MODE

TEMPERATURE/TIME

DISPLAYS

TURNS UNIT

ON OR OFF

TIMER

LOWERS

TEMPERATURE

OR TIME

TEMPERATURE

OR TIME

RAISES

SETS FAN SPEED

SETS MODE

SLEEP MODE

TEMPERATURE/TIME

DISPLAYS

TURNS UNIT

ON OR OFF

TIMER

CONTROL PANEL (TOUCH PAD for cool and heat model)

●

ON/OFF button

ON/OFF

Remote control

Signal transmitter

AUTO

COOL

SAVE

FAN

HEAT (Only for cooling and heating unit.)

Fan 2Fan 1

Fan 3 Fan 4

Don't drop or throw the remote control; Don't let any liquid in the remote control and

Note: Be sure that there are no obstructions between receiver and remote controller;

put the remote control directly under the sunlight or any place where is very hot.

●Press this button, Auto, Cool,Save(Energy

Saver), Fan,Heat mode can be selected

MODE button

MODE

circularly. Auto mode is default while

power on. UnderAutomode,thetemperature

will not bedisplayed;UnderHeatmode,

the initial value is 28 ℃

;Under other

modes,

the initial value is 25℃.

●Press this button, Sleep On and Sleep

Off can be selected. After powered on,Sleep

SLEEP button

SLEEP

Off is defaulted. After the unit is turned

off, the Sleep function is canceled. After

Sleep function set up, the signal of Sleep

will display. In this mode, the time of timer

can be adjusted. Under Fan and Auto

modes, this function is not available.

●Bypressingthiskey,youmayselectAUTO,

FAN 1, FAN 2, FAN 3

or FAN 4, and may

FAN button

FAN

cool, save and heat mode. After being

energized, AUTO is defaulted.

(oF)

Press this button, the unit will be turned on,

press it once more, the unit will be turned

off. When turning on or turning off the unit,

the Timer, Sleep function will be canceled,

but the presetting time is still remained.

also cycle between them. FAN 4 only in

●

SWING button

SWING

Press this key to activate or deactivate

the swing.

AUTO COOL SAVE

FAN

HEAT

Air Conditioner Features(continued)

with multifunction; For some function, which the model dosen't have, if press the

corresponding button on the remote controller that the unit will keep the original

running

status.

Notice: This is a general use remote controller, it could be used for the air conditioners

Remote control

●

+ button

●Presetting temperature can be decreased.

Press this button, the temperature can be

- button

set up, continuously press this button

and hold for two seconds, the relative

contents can quickly change, until unhold

this button and send the order that the ℃

(oF) signal will be displayed all the time.

The temperature adjustment is unav-

ailable under the Auto mode, but the order

can be sent by if pressing this button.

For presetting temperature increasing.

Press this button,can set up the temperature,

when unit is on . Continuously

press and

hold this button for more than 2 seconds,

the corresponding contents will be

changed

rapidly, until unpress the button

laying all along. In Auto mode, the temp-

erature can not be set up, but operate this

button can send the signal. Centigrade

setting range :16-30; Fahrenheit scale

setting range 61-86.

then send the information, is disp-

●

By pressing this key under switch-off state,

you may set the time for auto switch-on. The

TIMER button

TIMER

range of setting is 0.5 ~ 24 hours. The

characters "T-ON" and "H" will flash for 5

seconds. Within 5 seconds,you may make

one press of this key to complete the setting

and send the message.If the setting is valid,

the set time will be displayed for 2 seconds

before display of the temperature message.

During flash, you may press "+" key to

increase the value and press "-" key to decrease

the value. The time will increase or decrease

by 0.5 hours with each press of this key.

If pressing "+" or "-" key continuously, the

time value will change rapidly. The remote

controller can increase the set time by 0.5

hours every 0.25 seconds. After being

energized, the fault is no timer setting, and

there is no display of "T-ON" or "H". Press

ON/OFF key to switch on the unit and cancel

the auto switch-on.When the temperature

display becomes constant, you may press

this key again to display the remaining set

time. The time value, "T-On" and "H" will

display constantly for 2 seconds. After 2

seconds,the preset temperature will be

displayed. Within these 2 seconds, you may

press this key again to cancel the auto

switch-on and send the message.

By pressing this key under switch-on state,

you may set the time for auto switch-off.

The method of setting as the same as for

auto switch-on.

●

C( F)

o o

Air Conditioner Features(continued)

Introduction for special function

1. After powered on, press ON/OFF button, the unit will start to run.(Note: When

it is powered off, the guide louver of main unit will close automatically.)

2. Press MODE button, select desired running mode, or press COOL or HEAT

mode to enter into the corresponding operation directly.

3. Pressing + or - button, to set the desired temperature. (It is unnecessary

to set the temp. at AUTO mode.)

4. Pressing FAN button, set fan speed, can select AUTO, FAN 1, FAN 2,

FAN 3 or FAN 4.

5. Pressing SWING button, to select the swing.

1. Press SLEEP button, to set sleep.

2. Press TIMER button, can set the scheduled timer on or timer off.

Guide for operation- General operation

Guide for operation- Optional operation

When AUTO RUN mode is selected, the setting temperature will not be displayed on the

LCD, the unit will be in accordance with the room temp. automatically to select the

suitable running method and to make ambient comfortable.

★About AUTO RUN

Under switch-on or switch-off state, you may hold "+" and "-" key simultaneously to lock and

unlock the keypad. When locked, the display will show the LOCK icon, in which case the

lock icon will flash three times upon operation of any key. After the keypad is unlocked, the

lock icon on the display will be hidden. After being energized, the default is unlock.

About switch between Fahrenheit and Centigrade

Under switch-off state, you may hold "-" and "MODE" keys simultaneously to switch between

and

℃℉.

★

★About LOCK

Changing batteries and notices

★

●

Slightly to press the place to take out the back cover of wireless

remote control.(As shown in figure)

Take out the old batteries. (As show in figure)

Insert two new AAA1.5V dry batteries, and pay attention to the polarity.

(As show in figure)

Attach the back cover of wireless remote control. (As show in figure)

When changing the batteries, do not use the old or different batteries,

If the wireless remote control will not be used for a long time, please

otherwise, it can cause the malfunction of the wireless remote control.

take them out, and don't let the leakage liquid damage the wireless

remote control.

The operation should be in its receiving range.

It should be placed at where is 1m away from the TV set or stereo sound sets.

If the wireless remote control can not operate normally, please take them out,

after 30s later and reinsert, if they cannot normally run, please change them.

NOTE:

Air Conditioner Features(continued)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air PE8-11R-32 Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-06ESE-F Bedienungsanleitung

Soleus Air

Soleus Air KC-45H Technisches Datenblatt

Soleus Air

Soleus Air WS2-15E-201 Bedienungsanleitung

Soleus Air

Soleus Air TTWM1-10-01 Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-08E3 Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-10E2 Bedienungsanleitung

Soleus Air

Soleus Air PE3-09R-03 Bedienungsanleitung

Soleus Air

Soleus Air LX-140BL Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-18HCE Bedienungsanleitung

Soleus Air

Soleus Air PH-3-12R-03 Bedienungsanleitung

Soleus Air

Soleus Air GM-PAC-10E2 Bedienungsanleitung

Soleus Air

Soleus Air GH-PAC-10E5 Bedienungsanleitung

Soleus Air

Soleus Air KY-32U Bedienungsanleitung

Soleus Air

Soleus Air WS4-10EHW-301 Bedienungsanleitung

Soleus Air

Soleus Air WM1-05M-01 Bedienungsanleitung

Soleus Air

Soleus Air WM1-12E2-01 Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-15ESE Bedienungsanleitung

Soleus Air

Soleus Air TTW-SLG Bedienungsanleitung

Soleus Air

Soleus Air SG-CAC-08ESE Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-06ESE Bedienungsanleitung

Soleus Air

Soleus Air SA-50 Bedienungsanleitung

Soleus Air

Soleus Air PA1-12R-32 Bedienungsanleitung

Soleus Air

Soleus Air PH3-09R Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung