Soleus Air Soleus LX-100 LX-100 Bedienungsanleitung

10,000 / 12,000 BTU Portable Air Conditioner

LX-100/LX-100BL/LX-120/LX-120BL

Operating Instructions

Model No. LX-100/120

Thank you for choosing a Soleus Air Portable Air Conditioner. This o ner’s manual ill provide you

ith valuable information necessary for the proper care and maintenance of your ne product. Please

take a fe moments to thoroughly read the instructions and familiarize yourself ith all the opera-

tional aspects of your ne Soleus Air Portable Air Conditioner.

For your o n records, please attach a copy of your sales receipt to this manual. Also, rite the store

name/location, date purchased, and serial number belo :

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference.

1) Al ays place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this

manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or

outlet grilles.

4) The unit must be connected to a correctly grounded po er supply.

5) Do not start or stop the unit by inserting or pulling out the po er plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a sho er or a s imming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this

manual.

9) Do not let children play near this unit.

10) Al ays inspect the cord for signs of damage before use. If the po er cord is damaged, it must be replaced

by the manufacturer or a qualified service technician.

11) When cleaning the unit, al ays turn the unit off and unplug the po er cord.

SPECIFICATIONS

• The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.

• Noise level is measured at a distance of 3.28 ft a ay from the front of the unit, hen the unit is in cooling mode.

• Po er consumption is measured hen the fan runs at the highest speed setting.

• These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

• If the environment temperature is higher than the max operating temperature or lo er than the minimum operating

temperature, the air conditioner may not ork properly.

PACKAGE CONTENTS

Portable Air Conditioner

Exhaust Hoses (2)

Hose Adapters (2)

Windo Kit Adapter (2)

Remote Control

AAA Batteries (2)

Windo Kit - 3 Sliding Panels (1 dual hose panel, 2 extension panels)

Air Intake and Outlet Covers (2)

O ner’s Manual

MODEL LX-100 & LX-100BL / LX-120 & LX-120BL

COOLI G CAPACITY 10,000 BTU/H / 12,000 BTU/H

HEATI G CAPACITY 1350 Watts / 1350 watts

DEHUMIDIFYI G CAPACITY 50 pts/Day / 60 pts/Day

POWER

COOLI G 1020 W / 1350 W

HEATI G 1350W / 1350W

AIR FLOW VOLUME 225 CFM

POWER SOURCE

115 V~ 60 HZ

9/12 AMP / 12/12 AMP

COOLI G/HEATI G

SOU D PRESSURE LEVEL 46 dB(A)

ET WEIGHT 76 Lbs / 82 Lbs

OPERATI G

TEMPERATURE

COOLI G 60.8℉-107.6℉

HEATI G 23℉-89.6℉

DIME SIO S

ASSEMBLED 17.5” W ×32.75” H ×19” D

PACKAGE 22.4” W ×34.44” H ×19.88” D

REFRIGERA T R22

PRODUCT DIAGRAM

Casters

Louvers

Signa Receptor

Contro Pane

Fi ter Compartment

Air Intake Cover/Fi ter

PARTS & ASSEMBLY

PARTS

EXHAUST HOSES

WINDOW KIT

ASSEMBLY & INSTALLATION

INSTALLATION

When the unit is operating as an air conditioner or dehumidifier, the unit dra s in fresh outdoor air and exhausts hot air

out of the room to complete the air exchange. When the unit is operating in fan or heater modes, no outdoor air exchange

takes place. The indo kit and exhaust hose do not need to be installed hen the unit is used as a fan or heater.

NOTE: The supplied window it can be installed in sliding windows and sliding glass doors up to 8 ft. long

(approximate length).

MOUNTING THE EXHAUST HOSES

• Choose a suitable location, near a grounded electrical outlet and suitable indo or door. Remove

packaging and locate components.

• Extend both ends of the exhaust hoses approximately 6 inches.

• Scre the indo kit adapter onto one end of the exhaust hose clock ise. Scre the hose adapter onto

the other end of the exhaust hose clock ise. Repeat on the other exhaust hose.

• Remove outlet covers from the back of the unit by scre ing them counter-clock ise, then lifting up.

• Mount the exhaust hoses onto the back of the unit by locking the hose adapters into place.

DUAL HOSE WINDOW KIT INSTALLATION

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS

CONTROL PANEL & MULTI-COLOR DISPLAY

CONTROL PANEL

MULTI-COLOR DISPLAY

POWER BUTTON

MODE BUTTON

TIMER BUTTONS

TEMP & TIMER SELECTION

FAN SPEED BUTTON

AUTO A/C DEHUM. FAN HEAT

FAN SPEED

TIMER ON

TIMER OFF

TEMPERATURE

AND TIMER

INDICATOR

OSCILLATION ON/OFF SLEEP MODE ON/OFF EMERGENCY

CONDENSATE-

BUCKET FULL

SWING (LOUVER

OSCILLATION)

COMPRESSOR ON/OFF

OPERATING INSTRUCTIONS

CONTROL PANEL BUTTONS (Refer to the images on page 7)

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

2) Mode Se ection - Press the MODE Button repeatedly to cycle bet een the different modes: Auto mode,

Air Conditioner, Dehumidifier, Fan only, and Heater.

3) Fan Speed Contro - Press the FAN SPEED Button to cycle through the different fan speeds: High,

Medium, and low. The fan speed can be visually distinguished by the speed of the digital air segments

progressing out from the indmill fan image on the Multi-color display. There is an additional auto speed

setting that is enabled in only heating and cooling modes. This speed is next setting after lo hen press-

ing the speed control button. The speeds ill cycle through in this order: Low, Medium, High, Auto. Each

change in speed ill be associated ith a “beep” sound from the unit.

4) Temperature - Select the desired temperature by pressing either ▼ or ▲ key hen using the unit in

cooling or heating mode. The temperature indicator flashes to display the desired temperature setting. After

the temperature is set, the unit ill display this temperature setting until it is changed by the user. The

Multi-color display sho s temperature in Celsius or Fahrenheit. Press the ▼ or ▲ simultaneously to

change from C° to F°.

5) SWING - To turn on the exclusive WAVEFLO® oscillation, press the SWING button on the control

panel. Once you press SWING, the louvers on the unit ill oscillate up and do n and back and forth.

6) Timer - To program the timer, press the TIMER ON button until the display sho s a flashing “ ”.

Press the ▲ or ▼ buttons to change the clock to the desired time for the unit to automatically turn on.

Press the TIMER OFF button and the display on the unit ill flash “ ”. Press the ▲ or ▼

buttons to change the clock to the desired time for the unit to automatically turn off. The TIMER OFF

indicator ill flash for 3 seconds to activate the times you programmed.

NOTE: The timer ill also remember your settings hen it is set. If you set the timer hile in Air Condition-

ing mode, the timer ill automatically turn the unit on and off in air conditioning mode according to the de-

sired programmed times. The timer ill also remember the temperature settings, fan speed, and oscillation set-

ting. The timer orks hen the unit is in Air Conditioner mode, Heating mode, Dehumidifier mode, Fan

mode, and Auto mode

OPERATING THE UNIT USING THE CONTROL PANEL

Air Conditioner Mode

1) Install the exhaust hoses and indo kit properly (see pages 6).

2) Plug the Po er Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER button on the control panel.

4) Press the Mode button until the “ ” icon appears on the Multi-color display

5) Press the ▲ or ▼ buttons until the desired room temperature appears on the control panel

display. The temperature ranges from 61°F - 88 °F (16 °C - 31 °C).

6) Select the desired fan speed by pressing the FAN button.

NOTE: During hot days, the unit ill cool the room most efficiently by setting the temperature at the lo est

setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose and

indo kit, and keeping direct sunlight to a minimum ill also improve the cooling efficiency.

Dehumidifier Mode

1) Install the exhaust hoses and indo kit properly (see pages 6).

2) Plug the Po er Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER Button on the control panel.

4) Press the MODE button until the “ ” appears on the control panel display.

NOTE: The unit operates at lo fan speed during dehumidifier mode. The unit cools room slightly during

the dehumidification. Keep the indo s and doors closed to aid the effectiveness of the unit in removing the

moisture from the room.

NOTE: The unit ill not perform in dehumidifier mode hen the room temperature is lo er than 61°F .

Fan Mode

1) Plug the Po er Cord into an electrical outlet.

2) Turn on the unit by pressing the POWER button on the control panel.

3) Press the MODE button until the “ ” icon appears on the control panel display.

4) Select the fan speed by pressing the FAN button.

5) To circulate more air, press the SWING button on the remote control. The louvers ill oscillate in our

exclusive WAVEFLO® pattern; back and forth and up and do n, spreading more air throughout the

room.

NOTE: It is not necessary for the exhaust hoses and indo kit to be installed to operate the unit in fan mode.

Heating Mode

1) Plug the Po er Cord into an electrical outlet.

2) Turn on the unit by pressing the POWER button on the control panel.

3) Press the MODE button until the “ “ icon appears on the control panel display.

4) Press the ▼or ▲ buttons until the desired room temperature appears on the control panel display. The

temperature ranges from 61°F - 88 °F (16 °C - 31 °C).

5) Select the fan speed by pressing the FAN button. It is recommended to set the fan speed to lo .

NOTE: It is not necessary for the exhaust hoses and indo kit to be installed to operate the unit in heating

mode.

Auto Mode

1) Install the exhaust hoses and indo kit properly (see pages 6).

2) Plug the Po er Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER button on the control panel.

4) Press the MODE button until the “ ” icon appears on the control panel display. Select the fan speed

by pressing the FAN button.

NOTE: During AUTO mode, the unit operates in Heating mode hen the room temperature is belo 68 °F,

Dehumidifier mode hen the room temperature is bet een 68 °F to 80 °F. And Air Conditioner mode hen

the room temperature is above 80 °F.

S eep Mode (This mode can only be selected hen using the Remote control )

1) To set Sleep mode, make sure the unit is in Air Conditioner mode.

2) Press the SLEEP Button on the remote control. The “ ” icon appears on the control panel display.

3) When in SLEEP mode, the fan ill run on lo to keep fan noise at a minimum.

4) When in Air Conditioner mode, the temperature setting ill gradually increase to 2°F above the original set

temperature for 6 hours. After 6 hours the temperature setting ill return to the set temperature.

5) When in Heating mode, the temperature setting ill gradually decrease to 2°F belo the original set tem-

perature for 6 hours. After 6 hours, the temperature setting ill return to the set temperature.

6) When in Dehumidifier mode, the temperature ill not change hen Sleep mode is selected.

Compressor Indicator

The “ ” icon ill light up on the control panel display hen the compressor turns on. The “ ” icon ill

turn off hen the compressor shuts off.

Emergency Condensate Ho ding Tank

When the room temperature is lo and the indoor humidity is high, the air conditioner may not be able to

evaporate some of the moisture fast enough. When this happens, the ater ill accumulate in an emergency

condensate tank inside the unit. Once the emergency condensate tank is full, the unit ill automatically shut

off and the “ ” ill appear on the control panel display. To empty the condensate tank, pull the drain plug

at the bottom back of the unit. You ill need a small pan, approximately 1” high to catch the ater coming out

of the condensate tank. Once the condensate tank is drained, the unit ill begin orking ithin a fe minutes.

The emergency condensate tank is approximately 1.5 Liters of ater. Another option is to purchase a small

hose from a hard are store that can fit around the 5/8” drain plug on the back of the unit and drain the unit into

a gravity drain or larger pan for continuous drainage. It is not advised to use continuous drainage hen the

room temperature is higher than 90°F .

Andere Handbücher für Soleus LX-100 LX-100

Dieses Handbuch passt für folgende Modelle

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air KFTHP-9-ID Bedienungsanleitung

Soleus Air

Soleus Air GM-WAC-15ESE-C Bedienungsanleitung

Soleus Air

Soleus Air GB-WAC-06SE-C Bedienungsanleitung

Soleus Air

Soleus Air PE2-07R-62 Bedienungsanleitung

Soleus Air

Soleus Air WS4-06EW-201 Bedienungsanleitung

Soleus Air

Soleus Air WS2-15E-201 Bedienungsanleitung

Soleus Air

Soleus Air PE2-07R-62 Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-06ESE-C Bedienungsanleitung

Soleus Air

Soleus Air MA-9000AH Bedienungsanleitung

Soleus Air

Soleus Air HCB-P11-A Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air HCC-C09HP-A Bedienungsanleitung

Soleus Air

Soleus Air KY-32H Bedienungsanleitung

Soleus Air

Soleus Air PA1-12R-32 Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-10E2 Bedienungsanleitung

Soleus Air

Soleus Air KFCHP5-09-ID Bedienungsanleitung

Soleus Air

Soleus Air HCC-C09HP-A Bedienungsanleitung

Soleus Air

Soleus Air WS1-05M2-02 Bedienungsanleitung

Soleus Air

Soleus Air MAC 7500 Bedienungsanleitung

Soleus Air

Soleus Air KY-34 Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-15ESE-C Bedienungsanleitung

Soleus Air

Soleus Air Soleus LX-100 LX-100 Bedienungsanleitung

Soleus Air

Soleus Air PE6-10R-03 Bedienungsanleitung

Soleus Air

Soleus Air KC-45H Technisches Datenblatt

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung