Soleus Air HCB-P11-A Bedienungsanleitung

 BTU Portable Air Conditioner with

Evaporative Technology

Operating Instructions

Model No.: HCB-P11-A

3092402

Reference No.: BPA11

V.140204

Thank you for choosing a Soleus Air Portable Air Conditioner. This owner’s manual will provide you

with valuable information necessary for the proper care and maintenance of your new product. Please

take a few moments to thoroughly read the instructions and familiarize yourself with all the operational

aspects of your new Soleus Air Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the store

name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or outlet

grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced by the

manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

12) When the unit is not in use, always remove the venting kit from window.

13) Do not mix old and new batteries. Do not mix alkaline, standard (carbon - zinc), or rechargeable (nickel –

cadmium) batteries.

SPECIFICATIONS

 The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.

 The operational ambient temperature is between 61°F ~ 109°F.

 Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.

 Power consumption is measured when the fan runs at the highest speed setting.

 These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

 If the ambient temperature is higher than the max operating temperature or lower than the minimum operating tem-

perature, the air conditioner may not work properly.

PACKAGE CONTENTS

Portable Air Conditioner (1)

Exhaust Hose (1)

Hose Adapter (1)

Window Kit Adapter (1)

Remote Control (1)

AAA Batteries (2)

Window Kit - 3 Sliding Panels (1 single hose panel, 2 extension panels)

Owner’s Manual (1)

MODEL / REFERENCE NUMBER HCB-P11-A / BPA11

COOLING CAPACITY 11,000 Btu/Hr

DEHUMIDIFIER CAPACITY 48 Pints/Day

AIR FLOW VOLUME 225 CFM

POWER SOURCE 115 V / 60 Hz

RATED CURRENT 9.3 Amps

SOUND PRESSURE LEVEL 46 dB(A)

NET WEIGHT 56 Lbs

PRODUCT DIMENSIONS (W x D x H) 11.75”W x 18.25”D x 24.625”H

REFRIGERANT R-410A

COOLING POWER CONSUMPTION 1060 Watts

LCDI POWER CORD AND PLUG

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord

and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexi-

ble cord with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the

nominal current leakage between the cord shield and either load conductor exceeds a predetermined

value. The cord will remain de-energized until the devise has been manually reset. This is intended to re-

duce the risk of a fire in the power cord or combustible materials nearby. The cord shields are not grounded

and they must be considered a shock hazards if exposed. The cord shield must not be connected to ground

or to any exposed metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet. The LED light will turn on.

2. Press TEST Button, circuit should trip, cutting power to the air conditioner. When this occurs,

3. Press RESET button to restore power to the machine. Once power is restored, the LED light

will turn on again.

If test button is pressed and unit can still be turned on, current leakage has been detected. Do not use the

air conditioner or attempt to reset the LCDI Plug. Contact Soleus Air Customer Service for troubleshooting

recommendations.

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as “ON” and “OFF” switches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.

LED LIGHT

the LED light will turn off.

Note: Your units power cord and plug may differ from the one shown.

PRODUCT DIAGRAM

Casters

Louvers

Control Panel and

LED display

Air Filter Compartment

and Air Intake

Air Filter Compartment

and Air Intake

Power

Cord Wrap

Remote Control

Holder

Exhaust Outlet

Drain

Plug

Carry Handle

Power Cord

PARTS & ASSEMBLY

PARTS

EXHAUST HOSE

WINDOW KIT

ASSEMBLY & INSTALLATION

INSTALLATION

When the unit is operating as an air conditioner, or dehumidifier, the unit draws in fresh outdoor air and exhausts hot air

out of the room to complete the air exchange.

NOTE: The supplied window kit can be installed in sliding windows and sliding glass doors from 14 inch up to

55.5 inch long.

MOUNTING THE EXHAUST HOSE

 Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove

packaging and locate components.

 Extend both ends of the exhaust hose approximately 6 inches.

 Screw the window kit adapter onto one end of the exhaust hose counter-clockwise. Screw the hose

adapter onto the other end of the exhaust hose counter-clockwise.

 Slide the hose adapter of the exhaust hose down arrow over the discharge opening on the back of the unit.

 Open the window or door and adjust the length of window kit to fit the opening. Then make the kit fixed.

 Attach the window kit adapter of the exhaust hose to the window kit.

WINDOW KIT INSTALLATION

Installation of the Venting Kit

FOR SINGLE HOSE PORTABLE AIR CONDITIONERS

The venting kit must be installed in order for the unit to

work correctly in the air conditioning mode. The venting

kit should not be used while the unit is heating or

fanning.

The window kit has been designed to fit into most

vertical and horizontal window openings. The window kit

can also be used in a sliding door.

1. Choose a suitable location, near a grounded

electrical outlet and a suitable window or door.

Remove packaging and locate components. (Figure

2. Slide the exhaust connector over the discharge

opening on the back of the unit. (Figure B)

3. Connect the exhaust hose to the exhaust connector,

aligning the fitted grove.(Figure C)

4. Open the window or door and adjust the length of

the window kit to fit the opening. (Figure D) If

necessary, mark the kit and cut one end down to

properly fit the opening. (Figure E&F)

5. Attach the window kit adapter to the window kit.

(Figure G)

6. Place the window kit back into the window and

attach the exhaust hose to the window kit adapter.

(Figures H & I) Close the window tightly. (Figure J)

Your portable Air Conditioner is now ready to cool!

NOTE: When using the venting system, keep the exhaust

hose as straight as possible. The exhaust hose can be

shortened, but it is not recommended to increase the

length of the exhaust hose. Do not use an extension

cord with your portable air conditioner.

Optional Window Kit Adapter Extension (Included)

The Window Kit Adapter Extension is an optional part

that can be used on window sizes that require a longer

connection between the window and the exhaust hose.

NOTE: The Portable Air Conditioner above may differ from the unit described in this manual. The above directions and

images show general directions for Soleus Air hose portable air conditioners.

WINDOW KIT ASSEMBLY

1.Parts:

A) 2 Track Screws

B) 2 Wing Nuts

C1 & C2) 2 Hose Panels, one Exhaust Hose Openings

D) 1 Sliding Track Panel

2. Assembly:

First, take the Track Screws (A) and screw one

into each of the small holes found on the Hose

Panels (C1 & C2).

3. Next, take the Wing Nuts (B) and tighten them

around each of the Track Screws (A). Do not tighten

the Wing Nuts (B) all the way; make sure they are

somewhat loose.

4. Now, place the Sliding Track Panel (D)

over the Track Screw (A) on Hose Panel (C1).

5. Next, take the other Hose Panel (C2) and connect

it to Hose Panel (C1) by placing the Sliding Track

Panel (D) over the Track Screw (A) on Hose Panel

(C2).

6. The Hose Panels (C1 &C2) should now be

connected using the Sliding Track Panel (D).

7. To complete the assembly, tighten the wing Nuts

(B) installed earlier. The finished Window Kit

should resemble the image seen below.

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS

CONTROL PANEL

TEMPERATURE

AND TIMER

INDICATOR

FAN SPEEDMODE

TIMER/TEMP DECREASE

POWER

TIMER/TEMP INCREASE

TIMER

OPERATING INSTRUCTIONS

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Air Condi-

tioner and Dehumidifier.

3) Fan Speed Control - Press the FAN Button to cycle through the different fan speeds: High and low.

4) Temperature - Select the desired temperature by pressing either ▼or ▲ key when using the unit in

cooling mode. The temperature indicator flashes to display the desired temperature setting. After the tem-

perature is set, the unit will display this temperature setting until it is changed by the user. The temperature

indicator display shows temperature in Celsius or Fahrenheit. Press the ▼and ▲simultaneously to

change between Celsius and Fahrenheit .

5) Auto-on Timer- To program the Auto-on timer, press the TIMER button when the unit is powered off.

Once the TIMER button is pressed the hours will blink on the display. Press the ▼or ▲ buttons to

change the number to the desired hours (1-24 hours) for the unit to automatically turn on. The timer is set

when the TIMER stops flashing.

6) Auto-off Timer- To program the Auto-off timer, press the TIMER button when the unit is powered on.

Once the TIMER button is pressed the hours will blink on the display. Press the ▼or ▲ buttons to

change the number to the desired hours (1-24 hours) for the unit to automatically turn off. The timer is set

when the TIMER stops flashing.

NOTE: Heat mode is not available on this model.

- Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

2) Mode Selection

$LU&RQGLWLRQHUPRGHRQO\

OPERATING THE UNIT USING THE CONTROL PANEL

Air Conditioner Mode

1) Install the exhaust hose and window kit properly (see pages 7 & 8 ).

2) Plug the Power Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER button on the control panel.

4) Press the Mode button until the led of AIR CONDITIONER light up on the control panel display.

5) Press the ▲or ▼buttons until the desired room temperature appears on the control panel display. The

temperature ranges from 61°F - 88 °F (16 °C - 31 °C).

6) Select the desired fan speed by pressing the FAN button.

NOTE: During hot days, the unit will cool the room most efficiently by setting the temperature at the lowest

setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose and

window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.

NOTE: When the unit is running on cooling mode, the exhaust hose is required and must be vented outside

using the supplied window kit.

Dehumidifier Mode

1) Install the exhaust hose and window kit properly (see pages 7 & 8 ).

2) Plug the Power Cord into an electrical outlet.

3) Turn on the unit by pressing the POWER Button on the control panel.

4) Press the MODE button until the led of DEHUMIDIFIER light up on the control panel display.

5) change the direction of the air flow manually adjust the horizontal louvers up or down.

NOTE: The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly during

while dehumidifying. Keep the windows and doors closed to aid the effectiveness of the unit as it removes

moisture from the room.

NOTE: When the unit is running on dehumidifier mode, the exhaust hose is required and must be vented

outside using the supplied window kit. The unit will not perform in dehumidifier mode when the room tem-

perature is lower than 61°F .

Compressor Indicator

The COMPRESSOR LED will light up on the control panel display when the compressor turns on. The LED of

COMPRESSOR will turn off when the compressor shuts off.

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air KFMHP-18-ID Bedienungsanleitung

Soleus Air

Soleus Air PSX-08-01 Bedienungsanleitung

Soleus Air

Soleus Air PH4-10R-01 Bedienungsanleitung

Soleus Air

Soleus Air PSR-06-01 Bedienungsanleitung

Soleus Air

Soleus Air GM-PAC-08E3 Bedienungsanleitung

Soleus Air

Soleus Air FE-08BA Bedienungsanleitung

Soleus Air

Soleus Air LX-140 Bedienungsanleitung

Soleus Air

Soleus Air PSX-08-01B Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-05SM Bedienungsanleitung

Soleus Air

Soleus Air PE2-10R-32 Bedienungsanleitung

Soleus Air

Soleus Air PE4-11R-03 Bedienungsanleitung

Soleus Air

Soleus Air GM-WAC-25ESE-C Bedienungsanleitung

Soleus Air

Soleus Air KY-28U Bedienungsanleitung

Soleus Air

Soleus Air KFHHP-22-ID Technisches Datenblatt

Soleus Air

Soleus Air PH3-09R Bedienungsanleitung

Soleus Air

Soleus Air TTWM1-10-01 Bedienungsanleitung

Soleus Air

Soleus Air PH4-13R-01 Bedienungsanleitung

Soleus Air

Soleus Air PS08-01 Bedienungsanleitung

Soleus Air

Soleus Air HCC-W12ES-A1 Bedienungsanleitung

Soleus Air

Soleus Air LX-140 NT Bedienungsanleitung

Soleus Air

Soleus Air WS1-05M2-02 Bedienungsanleitung

Soleus Air

Soleus Air GM-TTW-10HC Bedienungsanleitung

Soleus Air

Soleus Air KY2-34 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung