SOMFY Sonesse 50 Bedienungsanleitung

Sonesse 50 RS485

Ref. 5106225B

EN Instructions

AR 

www.somfy.com

CONTENT

1.  1

1.1 Fields of application 1

1.2 liability 2

2.  2

2.1. Installation 2

2.2. Wiring 3

2.3. Commissioning 5

2.4. Tips and recommendations for

installation 5

3.  6

3.1. operation 6

3.2. Tips and recommendations for use 6

4.  6

ORIGINAL GUIDE

1. FIELDS OF APPLICATION AND LIABILITY

1.1 FIELDS OF APPLICATION

The Sonesse 50 drive is designed to drive all types of indoor awning

(roller blinds, boat blinds, Roman blinds, Venetian blinds and projection screens), excluding

pantographs.

The Sonesse 50 drive is designed to drive multi-banding roller blinds.

The Sonesse 50 drive is designed to drive several roller blinds simultaneously, where these are

interconnected by a drive bracket.

The Sonesse 50 drive is not designed to be used with a compensating spring.



The Sonesse 50 drive is not designed for outdoor awnings (e.g. outdoor vertical blinds, roller

shutters, etc.)

The Sonesse 50 drive has been developed to meet indoor awning drive requirements.

Its quiet operation ensures user comfort and well-being.

For more information, and to optimise the acoustic performance of your indoor awning, please

contact a Somfy adviser.

This operating and installation guide applies to all Sonesse 50 drive torque/speed, control

technology and motor head (star head or round head) versions.

1.2 LIABILITY

Before installing and using the Sonesse 50 drive, please read   

. In addition to following the instructions given in this guide, the instructions

detailed in the attached  document must also be observed.









Such use, and any failure to comply with the instructions given in this guide and in the attached

 document, absolves Somfy of any liability and invalidates the warranty.

The installer must inform its customers of the operating and maintenance conditions for the

Sonesse 50 drive and must provide them with the instructions for use and maintenance, and

the attached  document, after installing the Sonesse 50 drive. Any After-

Sales Service operation on the Sonesse 50 drive must be performed by a drive and home

automation professional.

If in doubt when installing the Sonesse 50 drive, or to obtain additional information, contact a

Somfy adviser or go to the website www.somfy.com.

2. INSTALLATION

L1 = …

Ø > 47 mm

c

Ø = 47 mm



1) 2)

e

Safety warning! Information

Caution!

Instructions which   be followed by the drive and home automation professional

installing the Sonesse 50 drive.

Never drop, knock, drill or submerge the drive.

Install a separate control point for each drive.

2.1. INSTALLATION



1) Fit the accessories required to integrate the drive in the



on the drive.

and the drive wheel con the drive.

2) Measure the length (L1) between the inner edge of the

drive head and the rim of the drive wheel.



1) Cut the roller tube to the required length, depending on

the motorised product.

2) Deburr the roller tube and remove the swarf.

3) For roller tubes which are smooth inside, cut a notch



= 4 mm /0.16 In ; e= 28 mm /1.1 In.



15 mm

5 mm

20 mm



Ø>47mm

ehe

Ø>47mm

ehe



1) Slide the drive into the roller tube.

For roller tubes which are smooth inside, position the

notch previously cut on the boss on the crown.

2) The drive wheel must be locked in place to prevent it



• 

drive wheel using 4 x Ø 5 mm self-tapping screws,

or by using 4 x Ø 4.8 mm steel pop rivets placed 5

mm to 15 mm from the outer rim of the drive wheel,

regardless of the roller tube.

The screws or pop rivets must only be attached to

the drive wheel and not to the drive.

• Alternatively, a drive wheel stop can be used for tubes which are not smooth.



f

and onto the drive bracket 

Ensure that the drive/tube assembly is secured onto

the end bracket. This operation prevents the drive/

tube assembly from coming out of the end bracket

mounting when the roller blind reaches the lower end

limit position.

hin

place.



2.2. WIRING

Cables which pass through a metal wall must be protected and isolated using a sheath or sleeve.

Attach cables to prevent any contact with moving parts.

The cable on the Sonesse 50 can be removed. If it is damaged, replace it with an identical

cable.



easily.

Always make a loop in the power supply cable to prevent water entering the motorisation!

- Turn off the power supply.

- 



Neutral Live Earth

230V -50 Hz Blue Brown Yellow/

Green

220V -60 Hz

120V -60 Hz White Black Green

100V-

50/60Hz

3 x 0.75 mm2

3 x 1,5 mm2

1) Data cable RJ9/RJ45.









 

 

 

 

RJ9 RJ45









 

 

 

 

1.1) .

1.2) .



Connect the data cable to the motor according to the information in the tables below.

Between the RS485 data wire and the RS485 product, the cable length should not exceed

20m.

Make sure the data cable is not pinched or damaged during the installation of the drive/

tube onto the end bracket.

2.4. TIPS AND RECOMMENDATIONS FOR INSTALLATION

2.4.1. 

2.3. COMMISSIONING

To set the motor, use the RS485 SETTING



Connect the RS485 SETTING TOOL to the motor

switch on and follow the instruction on the RS485



2) Data cable RJ9/RJ9



















RJ9 RJ9

Observations  Solutions

The motorised

product does not

operate.

The wiring is incorrect. Check the wiring and modify it if

necessary.

The motorisation is in thermal

protection. Wait until the motor cools down.

An incorrect Data cable has been

used. Check the DAta cable

The motorised

 The drive wheel and the crown

are not suitable for the tube. Replace the drive wheel and the crown

The motorised product is com-

pressed between the brackets Increase the play between the brackets

The tube contains swarf and

screws. Clean the roller tube.

3. USE AND MAINTENANCE

This motorisation is maintenance-free

3.1. OPERATION

To control the motor, please refer to the installation instruction of the used control.

3.2. TIPS AND RECOMMENDATIONS FOR USE

3.2.1. 

If the motorised product still does not work, contact a motorisation and home automation

professional.

4. TECHNICAL DATA

 230V-50Hz

120V-60Hz 100V-50/60Hz 220V-60Hz

Operating

temperature 

Index protection

rating 

Safety level Class I

Connector RJ9

Somfy Activités SA, F-74300 CLUSES asmanufacturer hereby declares that the drive covered by these instructions when marked

for input voltage 230V~50Hz and used as intended according to these instructions, is in compliance with the

essential requirements of the applicable European Directives and in particular of the Machinery Directive 2006/42/EC and EMC

Directive 2014/30/EU.

The full text of the EU declaration of conformity is available at www.somfy.com/ce. Antoine Crézé, Approval manager, acting on behalf of Activity

director, Cluses, 09/2017.

Observations  Solutions

The motorised

product does not

operate. The control point battery is weak. Check whether the battery is weak and

replace it if necessary.

The motorisation is in thermal

protection mode. Wait for the motor to cool down.



1 1

11-1

22-1

2 .2

21-2

32-2

53-2

54-2

6 .3

61-3

62-3

6 .4



1

1-1

Sonesse 50



Sonesse 50

Sonesse 50



Sonesse 50



Sonesse 50

Sonesse 50



.Somfy

Sonesse 50



2-1

Sonesse 50

.

 Sonesse 50



Sonesse 50

.Somfy

     Sonesse 50        

Sonesse 50

Sonesse 50

SomfySonesse 50

.www.somfy.com

2

L1 = …



c





1) 2)

e



  

.Sonesse 50





1-2

1-1-2

1



c

L12

2-1-2

1

2

3



.1.1 / e0.16 /  4 = 



15

5

20

3-1-2

1



2

•parker

Ø 4,8pop4Ø 5

155



pop



•

4-1-2

f1



         



h2



2-2





Sonesse 50





-

-









50230



 60220

60120



-100

60/50

3 x 0.75 mm2

3 x 1,5 mm2



Ø>47mm

ehe

Ø>47mm

ehe

Andere Handbücher für Sonesse 50

Inhaltsverzeichnis

Sprachen:

Andere SOMFY Gleichstromantrieb Handbücher

SOMFY

SOMFY HOME MOTION Twipso io Bedienungsanleitung

SOMFY

SOMFY FTS50 Montageanleitung

SOMFY

SOMFY SONESSE 30 WF RTS LI-ION Bedienungsanleitung

SOMFY

SOMFY Sonesse Ultra 50 RTS Betriebsanleitung

SOMFY

SOMFY Sonesse 50 RTS Installationsanleitung

SOMFY

SOMFY ilmo2 50 WT Bedienungsanleitung

SOMFY

SOMFY Sonesse Ultra 50 Bedienungsanleitung

SOMFY

SOMFY Sonesse Ultra 50 Bedienungsanleitung

SOMFY

SOMFY J4 io Montageanleitung

SOMFY

SOMFY Sonesse 40 Zigbee Bedienungsanleitung

SOMFY

SOMFY Sonesse 28 WF Zigbee Bedienungsanleitung

SOMFY

SOMFY Roll Up 24 WF RTS Li-ion Bedienungsanleitung

SOMFY

SOMFY ILMO 2 40 WT Bedienungsanleitung

SOMFY

SOMFY Sonesse ULTRA 30 WireFree RTS Li-ion Betriebsanleitung

SOMFY

SOMFY Movelite DCT Bedienungsanleitung

SOMFY

SOMFY S&SO-RS100 io Bedienungsanleitung

SOMFY

SOMFY Sunea 40 Solar io Bedienungsanleitung

SOMFY

SOMFY S&SO-RS100 io Bedienungsanleitung

SOMFY

SOMFY Roll Up 28 WireFree RTS Bedienungsanleitung

SOMFY

SOMFY Sunea 40 Solar io Bedienungsanleitung

SOMFY

SOMFY Roll Up Basic 28 Bedienungsanleitung

SOMFY

SOMFY LS 40 Bedienungsanleitung

SOMFY

SOMFY Sunea 40 RTS DC Bedienungsanleitung

SOMFY

SOMFY ALTUS RTS Series Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Stücklistenhandbuch

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

Beckhoff

Beckhoff AX8911 Bedienerhandbuch