SOMFY Dexxo Pro 800 Bedienungsanleitung

Installation instruction for the gate drive

Series Dexxo

Before programming the drive, the upper gate's limit switch must be installed.

The drive uses a movement limiter as reference points for automatically setting the upper end position. Upper position

limiter (when the door is fully open).

[1] [2]

The engine rail mounting bracket should be mounted in the lintel or on the ceiling, however not more than

200 mm from the lintel (see drawing)

AUTOSET function, setting the gate end positions.

Dexxo Pro/io 800/1000 [N]

The condition for the correct course of the AUTOSET mode is the installation of the upper limit stop

and the coupling of the bogie with the gate.

The learning mode (AUTOSET) can be started each time the need arises.

The servomotor automatically selects the thrust force to the specic gate.

1. Press the key for approx. 2 seconds, the drive lamp will light up and go o. S2 will appear on the display.

2. Using the and buttons, move the chain / belt coupler until it engages with the guide arm (bogie). Long press

causes continuous closing movement. Long press causes a continuous opening movement.

3. Using the button close the gate by setting the lower end position.

4. Press to start the learning cycle (Autoset).

5. The gate will start a full OPEN / CLOSE cycle to automatically select the force.

6. C1 on the display - means conrmation of the correct execution of the Autoset function.

7. S0 or S1 is the negative result of the AUTOSET function. In this case, check the mechanics of the gate and try again.

Learning function, setting the gate end positions.

Dexxo Optimo 800N

The learning mode (AUTOSET) can be started each time the need arises.

The condition for the correct course of the AUTOSET mode is the installation of the upper limit stop

and the coupling of the bogie with the gate.

1. Press the key for approx. 2 seconds until the lamp switches on. The display range indicator light ashes .

2. Using the and buttons, move the chain / belt coupler until it engages with the guide arm (bogie). Long press

causes continuous closing movement. Long press causes a continuous opening movement.

3. Using the button close the gate by setting the lower end position. Release the key before the drive will force

the gate.

4. Press to start the learning cycle.

5. The gate will start a full OPEN / CLOSE cycle to determine the upper end position.

6. If the learning cycle has been successfully completed, the indicator light is on.

7. If the learning cycle has not been completed correctly, the indicator light continues to ash.

PROGRAMMING OF REMOTE CONTROLS - Dexxo: Optimo, Pro, io

Press and hold the key for approx. 2 seconds (the bulb will light up). Press the selected key on the remote control

(the bulb will start ashing).

Reprogramming the same remote control (channel) removes it from the Dexxo memory.

ERASE SETTING

Pressing the button for 7 seconds (the - lamp will go o - ashing) will erase all saved settings.

Detailed information about Somfy Dexxo engines can be found in the package with the engine.

DELETION OF REMOTE CONTROL

Pressing the button for 7 seconds (the lamp will light - go o - ashing) will erase all previously saved transmitters.

www.ekookna.com

1/2018

Andere Handbücher für Dexxo Pro 800

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SOMFY Toröffner Handbücher

SOMFY

SOMFY 3S io Bedienungsanleitung

SOMFY

SOMFY SGS 201 Bedienungsanleitung

SOMFY

SOMFY Ixengo L Bedienungsanleitung

SOMFY

SOMFY Elixo 500 3S io Bedienungsanleitung

SOMFY

SOMFY AXOVIA 220B RTS Bedienungsanleitung

SOMFY

SOMFY tecnoShades NR0-Rn Installationshandbuch

SOMFY

SOMFY Ixengo L 230V RTS Bedienungsanleitung

SOMFY

SOMFY AXOVIA 3S Bedienungsanleitung

SOMFY

SOMFY Ixengo L Bedienungsanleitung

SOMFY

SOMFY WISNIOWSKI Metro 800 RTS Bedienungsanleitung

SOMFY

SOMFY Freevia 280 Bedienungsanleitung

SOMFY

SOMFY MASTER PRO 180 Bedienungsanleitung

SOMFY

SOMFY AXOVIA MULTIPRO Bedienungsanleitung

SOMFY

SOMFY Rollixo Optimo RTS Bedienungsanleitung

SOMFY

SOMFY HOME MOTION Axovia 220B Bedienungsanleitung

SOMFY

SOMFY Elixo 500 3S io Bedienungsanleitung

SOMFY

SOMFY SGS 201 Bedienungsanleitung

SOMFY

SOMFY METRO SMART 800 io Bedienungsanleitung

SOMFY

SOMFY SGA 2000 Bedienungsanleitung

SOMFY

SOMFY ELIXO 3S Bedienungsanleitung

SOMFY

SOMFY EXAVIA Bedienungsanleitung

SOMFY

SOMFY FREEVIA Series Bedienungsanleitung

SOMFY

SOMFY Elixo 500 3S RTS Bedienungsanleitung

SOMFY

SOMFY IXENGO J S 230V Bedienungsanleitung

Beliebte Toröffner Handbücher anderer Marken

Elite

Elite CSW200UL Bedienungsanleitung

CAME

CAME FROG-PM4 Bedienungsanleitung

Aprimatic

Aprimatic ONDA 500 Bedienungsanleitung

Turnstiles

Turnstiles FSW 900 Bedienungsanleitung

Erreka

Erreka BUL BL33 Betriebsanleitung

Erreka

Erreka VULCAN S Bedienungsanleitung

Beninca

Beninca R1-2 WBV Bedienungsanleitung

Erreka

Erreka VULCAN D Bedienungsanleitung

Motorline professional

Motorline professional FORT Bedienungsanleitung

Beninca

Beninca BOB5024 Bedienungsanleitung

AGA

AGA GATEMASTER 900 HD Bedienungsanleitung

Chamberlain

Chamberlain MotorLift HC280ML Bedienungsanleitung

Cardin

Cardin BL Series Bedienungsanleitung

Westfalia

Westfalia 85 27 06 Bedienungsanleitung

CAME

CAME F500 Bedienungsanleitung

Extel

Extel VERA Bedienungsanleitung

Comunello Automation

Comunello Automation ABACUS 220 Bedienungsanleitung

CAME

CAME FA40230CB Bedienungsanleitung