SOMFY INTEO TELIS 1 RTS Bedienungsanleitung

www.somfy.com

Operating and installation guide

Telis 1 RTS

Ref. 5054463A

1. Brief introduction to the Telis 1 RTS remote control 3

1.1 What is the Telis 1 RTS for? 3

1.2 A few denitions 3

2. Safety - Important information 4

2.1 Installation and commissioning 4

2.2 Operating 4

2.3 Environment 4

3. Content of the kit and tools required 5

3.1 List of parts 5

3.2 Tools required 5

4. The Telis 1 RTS in detail 6

4.1 Components 6

4.2 Technical data 6

5. Adding a new Telis 1 RTS 6

5.1 Identifying the original control point 6

5.2 One-touch point 8

5.3 Point with Up/STOP/Down buttons 13

5.4 Timer 15

5.5 Situo control point 17

5.6 Telis 1 RTS Telis Soliris RTS remote controls 20

5.7 Telis 4 RTS/Telis 4 Soliris RTS remote controls 22

6. Replacing a lost or broken control point 24

6.1 Sole control point lost or broken 24

6.2 One lost or broken control point amongst others 24

7. Mounting the bracket 24

8. Everyday use of the Telis 1 RTS 25

8.1 Up and Down buttons 25

8.2 My button 25

8.3 Replacing the battery 26

8.4 Maintenance 26

9. Problems with the Telis 1 RTS? 26

Contents

Telis 1 RTS

Somfy's expertise delivers satisfaction guaranteed.

Thank you for choosing a Somfy Telis 1 RTS .

Before installing and using the Telis 1 RTS, please read this guide

carefully.

Somfy solutions animate your windows and entrances to bring your

whole house alive. Somfy solutions are designed so that everyone can

enjoy the benets of the products in their home, based on their specic

requirements.

In this guide, the term ‘product’ can include your awning, blind, curtain,

garage door, gate, projection screen, roller shutter.

Well thought-out and easy to use, Somfy solutions are one of life’s little

daily pleasures, making home life more enjoyable.

1. Brief introduction to the Telis 1 RTS remote

control

These instructions describe the installation steps required to make the

best use of the Telis 1 RTS. Advanced installation functions are available

on our website (address on the back cover of these instructions).

1.1 What is the Telis 1 RTS for?

The Telis 1 RTS is a wireless radio remote control compatible only with

products tted with Radio Technology Somfy (RTS):

The Telis 1 RTS is used:

As an individual control to control a single product (eg roller blind)

at a time.

As a group control to command several products at the same time

(eg several roller blinds) (advanced installation function).

1.2 A few denitions

Installation

All of the Radio Technology Somfy products a house is equipped with.

Favourite position

The favourite position is your ideal position for your product in certain

•

Telis 1 RTS

common situations, for example, your curtains or blinds partially closed

to shield the TV from afternoon sunlight; your awning partially extended

when you are dining beneath it in summer but don’t want to deprive your

houseplants of sunlight

2. Safety - Important information

2.1 Installation and commissioning

Before installing and using the Telis 1 RTS, please read these instruc-

tions carefully, which describe how to install, commission and operate

the Telis 1 RTS.

Never begin installing without rst checking the compatibility of the Telis

1 RTS with the associated equipment and accessories.

Any incorrect use will invalidate the warranty and Somfy’s liability.

2.2 Operating

Somfy recommends that at least one control point is located close to

the product or group of products.

Do not allow children to play with the xed control points. Keep remote

controls out of the reach of children.

Monitor the product (especially roller shutter/awning/garage door/gate)

while it is moving, especially during commissioning of the Telis 1 RTS,

and keep people at a distance until the product is completely closed.

Switch off the circuit breaker corresponding to the roller shutter/awning/

garage door/gate before any maintenance operation in the vicinity of

the product (for example, when cleaning windows near your awning).

Avoid moving the roller shutter/awning if ice has formed in it, unless

the motor is tted with anti-freeze protection.

Do not leave the Telis 1 RTS behind a window in full sunlight as it

cannot withstand temperatures greater than 60°C.

Do not leave the Telis 1 RTS in a car in winter.

Do not immerse or soak the Telis 1 RTS in any liquid.

Only use cleaning products recommended by Somfy.

Frequently check the product (eg awning) to detect any defects in

balance or any signs of wear. Do not use the product if a repair or

adjustment is required

2.3 Environment

Damaged electrical or electronic products, such as used batteries,

Telis 1 RTS

should not be disposed of with household waste. Please take them to

a collection point or an approved centre to ensure they are recycled

correctly.

3. Content of the kit and tools required

3.1 List of parts

Before starting installation and commissioning of the Telis 1 RTS,

check that all parts listed in the table below are present in the correct

quantity (Q):

No. Components Q.

1Telis 1 RTS remote control 1

2Mounting pin 1

3 Support 1

4Plug 1

5Screw 1

3.2 Tools required

Phillips screwdriver

Insulated athead electricians

screwdriver

Drill and drill bit

Pencil

•

Telis 1 RTS

4. The Telis 1 RTS in detail

4.1 Components

A. Up button

B. STOP/my button

C. Down button

D. Indicator light

E. PROG button

4.2 Technical data

Dimensions in mm (Height x Width x Depth):

Pure model: 134 x 41 x 21 mm

Lounge, Silver, Patio models: 145 x 49 x 22 mm

Operating temperature: 0°C to + 60°C

Protection rating: Inside use, in a dry room - IP 30 (Pure, Lounge,

Silver Models) ; IP 44 (Patio Model)

Frequency: 433.42 MHz

Range: 20 m through two concrete walls; 200 m in an open area

Battery: 3 V, type CR 2430

5. Adding a new Telis 1 RTS

5.1 Identifying the original control point

5.1.1 Installation recommendations

To add a Telis 1 RTS, use the control point linked to the product

which controls only this product: pressing the Down or Up button only

causes movement of the product to which the new Telis 1 RTS must

be connected.

Caution! If there is no longer a control point linked to the product (all the

control points are broken or have been lost), contact the Somfy assis-

tance service.

N.B.: These instructions only describe the installation procedure for

an additional Telis 1 RTS of the «individual control» type. Refer to the

instructions for advanced functions available on the Internet (address

on the back cover of these instructions) to install a control referred to as

«group control».

On some products, inputs in programming mode and the addition or

deletion of a control point are signalled by a series of beeps emitted

mysomfy.com

Telis 1 RTS

by the motor. On other products, this is

signalled by a brief movement of the

product.

Caution: If the product does not emit a

beep or make a brief movement, please

contact the Somfy assistance service.

Place the product in the midway posi-

tion before installing the new Telis 1

RTS so that the movements can be

easily seen.

5.1.2 Original control points

Find the original control point in the list

below and refer to the paragraph given

to add the new Telis 1 RTS:

1) Control point xed to the wall with

a single button, called a One-touch

point, see paragraph 5.2;

2) Control point xed to the wall with

Up/STOP/Down buttons, called a

Point with Up/STOP/Down buttons,

see paragraph 5.3;

3) Programmer type control point,

called a Timer, see paragraph 5.4;

4) Situo control point xed to the wall,

see paragraph 5.5;

5a) Telis 1 RTS remote control, see

paragraph 5.6;

5b) Telis Soliris RTS remote control,

see paragraph 5.6;

6a) Telis 4 RTS remote control, see

paragraph 5.7;

6b) Telis 4 Soliris RTS remote control,

see paragraph 5.7.

6a 6b

Telis 1 RTS

5.2 One-touch point

Move close to the product to install the

new Telis 1 RTS.

5.2.1 Identifying the model

Check that the original control point

has an elongated button.

Bring the product to the midway

position.

Remove the front cover from the one-

touch point:

One-touch point with a white and grey front

cover

Gently remove the front cover with

a at, pointed tool (such as a at-

head screwdriver) where the white

section and the grey section join.

Lever it, without using force, to

detach the mounting lugs from the

front cover.

One-touch point with a white front cover

Lever the front cover with a at,

pointed tool (such as a athead

screwdriver), without using force,

around the upper section of the

front cover to detach it from its

mounting.

Turn the front cover over to nd out the

model:

If there is a metal plate (a) inscribed

PROG next to the battery: model A.

If there is no metal plate inscribed

PROG next to the battery: model B.

A B

Telis 1 RTS

5.2.2 Adding the Telis 1 RTS

Model A:

Make a contact between the PROG

metal plate (a) on the electrical circuit

and the battery bracket using a

athead screwdriver, until the product

moves briey (or there is a series of

3 beeps): the programming function of

your RTS enabled products is activated

for approximately 2 minutes.

Take the new Telis 1 RTS and turn it

over.

Press the PROG button (E) on the

new Telis 1 RTS briey with the tip of

a pencil: the product will make another

brief movement (or emit a series of

8 beeps) to indicate that the new Telis

1 RTS is stored.

Press the down button on the new Telis

1 RTS:

If the product is lowered, the

Telis 1 RTS is operational.

If the product does not move, contact

the Somfy assistance service.

If the original control point must be

deleted, go to paragraph 5.2.3 "Deleting

an original control point".

If the original control point is to be kept,

ret the front cover:

One-touch point with a white and grey front

cover

Insert the mounting lugs into their

notches on one side of the front

cover.

Press on the other side until it clicks,

to x the front cover in its bracket.

Telis 1 RTS

One-touch point with a white front cover

Ret the front cover on its bracket

Model B:

Remove the battery from the original

control point using a plastic object.

Press on the centre section of the one-

touch point button.

Ret the battery in the base of its

bracket (with text legible).

Press the button again until the product

moves briey (or there is a series of

3 beeps): the programming function of

your RTS enabled products is activated

for approximately 2 minutes.

Take the new Telis 1 RTS and turn it

over.

Press the PROG button (E) on the

new Telis 1 RTS briey with the tip of

a pencil: the product will make another

brief movement (or emit a series of

8 beeps) to indicate that the new Telis

1 RTS is stored.

Press the down button on the new Telis

1 RTS:

If the product is lowered, the

Telis 1 RTS is operational.

If the product does not move, contact

the Somfy assistance service.

If the original control point must be

deleted, go to paragraph 5.2.3 "Deleting

an original control point".

If the original control point is to be kept,

ret the front cover:

Andere Handbücher für INTEO TELIS 1 RTS

Inhaltsverzeichnis

Andere SOMFY Fernbedienung Handbücher

SOMFY

SOMFY nina Bedienungsanleitung

SOMFY

SOMFY INTEO TELIS 1 RTS Bedienungsanleitung

SOMFY

SOMFY Situo 1 RTS Bedienungsanleitung

SOMFY

SOMFY KEYTIS 4 Bedienungsanleitung

SOMFY

SOMFY Situo 1 RTS Bedienungs- und Wartungsanleitung

SOMFY

SOMFY Telis Composio RTS Bedienungsanleitung

SOMFY

SOMFY SITUO 1 VARIATION Bedienungsanleitung

SOMFY

SOMFY Nina io Bedienungsanleitung

SOMFY

SOMFY Nina io Bedienungsanleitung

SOMFY

SOMFY Situo 1 Soliris RTS II Bedienungsanleitung

SOMFY

SOMFY SITUO 5 io/RTS PURE Installationsanleitung

SOMFY

SOMFY INTEO TELIS 4 RTS Bedienungsanleitung

SOMFY

SOMFY Harmoic Design System II Bedienungsanleitung

SOMFY

SOMFY KEYPOP 2 RTS Bedienungsanleitung

SOMFY

SOMFY Keytis NS2RTS Betriebsanleitung

SOMFY

SOMFY KEYGO Bedienungsanleitung

SOMFY

SOMFY SITUO 5 io/RTS PURE Bedienungsanleitung

SOMFY

SOMFY Situo 5 io Bedienungsanleitung

SOMFY

SOMFY Telis Composio io Bedienungsanleitung

SOMFY

SOMFY 1875157 Bedienungsanleitung

SOMFY

SOMFY Oximo RTS Bedienungsanleitung

SOMFY

SOMFY KEYTIS INTERIOR Bedienungsanleitung

SOMFY

SOMFY SITUO 1 VARIATION Bedienungs- und Wartungsanleitung

SOMFY

SOMFY Telis 1 Chronis RTS Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung