SOMFY Telis 4 Soliris RTS Bedienungsanleitung

SOMFY INSTRUCTIONS

TELIS 4 SOLIRIS RTS

REMOTE CONTROLS

Part #’s

1810648 Telis 4 Soliris RTS Patio

Sun/Wind

Selector

Wind

Only

Sun

& Wind

1 2 3 4 Programming

Button

BACK

Four Channel

Telis

1. With your current remote, select

the shade to operate by pressing

the Channel Selector Button. The

LED lights will illuminate each time

the Channel Selector Button is pressed

to show what channel is being

operated.

2. Using a paper clip, pen or similar device,

press and hold the Programming Button on

the back of the remote until your window

shade jogs up and down.

PROGRAMMING - ADDING A NEW REMOTE

4. Using a paper clip, pen or similar device,

press and hold the Programming Button

on the back. The window shade will jog.

This remote will now operate your shade

or awning.

3. Get the new remote and select

the new channel.

Programming

Button

Programming

Button

1 2 3 4

BACK

PAGE 1 REV5

PROGRAMMING - SETTING FAVORITE POSITION

1. Select the shade to operate by

pressing the Channel Selector Button.

The LED lights will illuminate each

time the Channel Selector Button is

pressed to show what channel is

being operated.

1 2 3 4

2. Using the up ( ) or down ( )

buttons, bring the shade or awning

to your favorite position, for example

halfway down or out. Press the

center ( ) button to stop movement

at the desired location.

BACK

Channel

Selector

LED Lights

1 2 3 4

Pen

Channel

Selector

LED Lights

1 2 3 4 my

Pen

my 4. To reach your favorite position,

press the center ( ) button

whenever the shade is already

stopped. The shade or awning

will automatically go to that

position.

3. Press and hold the center ( )

button until the window shade

jogs up and then down to record

the position.

1 2 3 4

C - 0019

NOTE: Wind sensor is factory set and does not require activation. In order to enable Sun/Wind mode for a particular shade, your

shade must be programmed to the Sun/Wind channel (ALL LEDS LIT) in addition to the shades original channel number (channels 1-4).

1. Select the shade you wish to be operated by the sun sensor by pressing the SUN/WIND SELECTOR BUTTON.

The LED lights will illuminate each time the SUN/WIND SELECTOR BUTTON is pressed to show what channel

is being operated.

2. Using a paper clip, pen or similar device, press and hold the Programming Button on the back of the remote

until your window shade jogs up and down.

3. Select the Sun/Wind channel by pressing the SUN/WIND SELECTOR BUTTON until ALL LED lights are illuminated.

4. Press and hold the SUN/WIND SELECTOR BUTTON. The lights will change sides and the shade will jog. When

the left side is lit, the shade or awning will only react to wind control. When the right side is lit, the shade

or awning will react to both sun and wind control.

NOTE: IN CASE OF A LOST TRANSMITTER, PROFESSIONAL PROGRAMMING ASSISTANCE IS REQUIRED. PLEASE CONTACT SOMFY

AT somfytech@somfy.com OR YOUR LOCAL DEALER AT www.somfysystems.com/locatedealer.

REPLACING THE BATTERY

1. Using a small screwdriver loosen the

screws on the reverse side of the remote

control and remove the back cover.

2. Replace the battery with one

2430 Lithium 3V battery.

PROGRAMMING SUN MODE: REQUIRES OPTIONAL SUN AND/OR WIND SENSOR

C - 0019

3. To lower your window shade or

extend your awning, simply press

the down ( ) button. 5

1 2 3 4

4. If you want to stop your shade or

awning while it is moving, press the

center ( ) button. 5

1 2 3 4

PAGE 2 REV 5

OPERATING

1. Select the shade to operate by

pressing the Channel Selector Button.

The LED lights will illuminate each

time the Channel Selector Button is

pressed to show what channel is

being operated.

2. To raise your window shade or

retract your awning, simply

press the up ( ) button.

1 2 3 4

Channel

Selector

LED Lights

1 2 3 4

1 2 3 4 Sun/Wind

Selector

1 2 3 4 Sun/Wind

Selector

Programming

Button

BACK

Pen

Programming

Button

BACK

Pen

ACTIVATING SUN MODE

1. Select the Sun/Wind channel by pressing the SUN/WIND SELECTOR BUTTON until ALL LED lights are illuminated.

2. Press and hold the SUN/WIND SELECTOR BUTTON. The lights will change sides and the shade will jog. When the left

side is lit, the shade or awning will only react to wind control. When the right side is lit the shade or awning will

to both sun and wind control.react

1 2 3 4 Sun/Wind

Selector

1 2 3 4 Sun/Wind

Selector

Andere Handbücher für Telis 4 Soliris RTS

Dieses Handbuch passt für folgende Modelle

Andere SOMFY Fernbedienung Handbücher

SOMFY

SOMFY Telis 1 Chronis RTS Bedienungsanleitung

SOMFY

SOMFY Nina Timer io Bedienungsanleitung

SOMFY

SOMFY Telis 6 Chronis RTS Bedienungsanleitung

SOMFY

SOMFY FREEROLL RTS Bedienungsanleitung

SOMFY

SOMFY Oximo RTS Bedienungsanleitung

SOMFY

SOMFY Situo 1 RTS Installationsanleitung

SOMFY

SOMFY Situo 5 io Bedienungsanleitung

SOMFY

SOMFY KEYGO Bedienungsanleitung

SOMFY

SOMFY Situo 1 Soliris RTS II Bedienungsanleitung

SOMFY

SOMFY Telis 6 Chronis RTS Bedienungsanleitung

SOMFY

SOMFY Telis 1 Lounge Bedienungsanleitung

SOMFY

SOMFY Telis 16 RTS Bedienungsanleitung

SOMFY

SOMFY Telis RTS Bedienungsanleitung

SOMFY

SOMFY INTEO TELIS 4 RTS Bedienungsanleitung

SOMFY

SOMFY INTEO TELIS 1 RTS Bedienungsanleitung

SOMFY

SOMFY Sonesse 40 Bedienungsanleitung

SOMFY

SOMFY KeyGo io Bedienungsanleitung

SOMFY

SOMFY inteo CENTRALIS RTS Bedienungsanleitung

SOMFY

SOMFY Telis 1 RTS Pure Bedienungsanleitung

SOMFY

SOMFY Nina io Bedienungsanleitung

SOMFY

SOMFY SITUO 5 io/RTS PURE Bedienungsanleitung

SOMFY

SOMFY Telis 4 Soliris RTS Bedienungsanleitung

SOMFY

SOMFY CENTRALIS RECEIVER Bedienungsanleitung

SOMFY

SOMFY HOME MOTION Chronis io Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung