SonicWALL Content Security Manager 2200 Bedienungsanleitung

COMPREHENSIVE INTERNET SECURITY

™

SonicWALL Content Security Manager Series

SonicWALL CSM 2200

Getting Started Guide

SonicWALL CSM Series Appliance Getting Started Guide Page 1

SonicWALL Content Security Manager 2200 Getting

Started Guide

Thank you for purchasing a SonicWALL Content Security Manager (CSM) series

appliance. The SonicWALL CSM is an Internet content and application filter that

enhances security and employee productivity, optimizes network bandwidth and

mitigates legal liabilities. The SonicWALL CSM integrates into virtually any network to

provide powerful, scalable, cost-effective Internet content filtering that is easy to

implement, requiring no change to your network clients. The SonicWALL CSM filters

HTTP traffic on any port, regardless of whether the network clients use external proxy

servers.

Note: For complete instructions, refer to the SonicOS CF 2.5 Administrator’s Guide. For

solutions using SonicWALL ADConnector, refer to the SonicWALL Content

Security Manager Integrated Solutions Guide, available on the

SonicWALL CSM Resource CD and at

<http://www.sonicwall.com/support/documentation.html>.

Contents

This getting started guide contains the following sections:

•“Before You Begin” on page 2

• “Check Package Contents” on page 3

• “What You Need to Provide” on page 4

• “Important Information You Need” on page 4

• “SonicWALL CSM 2200 Front and Back Panels Overview” on page 5

•“Configuring Your SonicWALL CSM” on page 6

“Applying Power to the SonicWALL CSM” on page 6

“Accessing the SonicWALL Management Interface” on page 7

“Configuring Your SonicWALL CSM Using the Setup Wizard” on page 9

“Connecting the SonicWALL CSM to Your Network” on page 14

“Registering Your SonicWALL CSM” on page 17

“Understanding the *Default Policy” on page 21

“Verifying the *Default Policy” on page 23

“Integrating the SonicWALL CSM with Microsoft Active Directory” on page 24

•“Advanced Configuration” on page 32

Page 2

Before You Begin

This section contains the following subsections:

•“Check Package Contents” on page 3

•“What You Need to Provide” on page 4

•“Important Information You Need” on page 4

•“SonicWALL CSM 2200 Front and Back Panels Overview” on page 5

SonicWALL CSM Series Appliance Getting Started Guide Page 3

Check Package Contents

1. One SonicWALL SonicWALL CSM appliance

2. One SonicWALL CSM Getting Started Guide

3. One SonicOS Release Note

4. One Thank You card

5. One straight-through Ethernet cable

6. One red crossover Ethernet cable

7. One power cord*

8. One SonicWALL CSM Resource CD

9. Rack mounting hardware

*The power cord is for North America use only.

* Das eingeschlossene Netzkabel ist für Gebrauch in Nordamerikas nur vorgehabt.

Für Europaïsche Union (EU) Kunden, ist ein Netzkabel nicht eingeschlossen.

Note: SonicWALL ADConnector and SonicWALL ViewPoint software for the

SonicWALL CSM are available for download from the SonicWALL Web site

<https://www.mysonicwall.com>.

Page 4

What You Need to Provide

• A firewall or security appliance protecting your LAN

• PC or Macintosh computer to act as an out-of-band management station for initial

configuration of the SonicWALL CSM

• Web browser for accessing the SonicWALL CSM’s Web-based management

interface. The Web browser must support Java and HTTP uploads. Internet Explorer

5.0 or higher or Netscape Navigator 4.7 or higher are recommended.

Important Information You Need

LAN

LAN IP address range:

LAN netmask:

DNS server:

Firewall or Security Appliance

Firewall or router gateway IP address:

Firewall or security appliance management IP address:

mySonicWALL.com Account

This is sensitive information. Store this information carefully.

Username:

Password:

SonicWALL CSM Management Account

This is sensitive information. Store this information carefully.

Username: (default: admin)

Password: (default: password)

SonicWALL CSM Series Appliance Getting Started Guide Page 5

SonicWALL CSM 2200 Front and Back Panels Overview

Power Test Alarm X0 X1 X2 X3/HF-Port

Console LED LED LED Port Port Port

On/Off

Power Switch

Front Panel Feature Description

Console Provides access to command-line interface.

Power LED Indicates the SonicWALL CSM appliance is

powered on.

Test LED Indicates the SonicWALL CSM appliance is in test mode.

Alarm LED Indicates a critical error or failure.

X0 Port Provides a connection to your LAN.

X1 Port Provides a primary (Ethernet) connection to the Internet.

X2 Port Provides a connection for out-of-band management. This

port has no network connection.

X3/HF-Port Provides an optionally configurable HF (hardware failover)

port. Note: This port is not configurable for other types of

connections.

Back Panel Feature Description

Power Provides power connection using supplied power cord.

On/Off Switch Powers the SonicWALL CSM appliance on and off.

Page 6

Configuring Your SonicWALL CSM

Configuring your SonicWALL CSM comprises the following steps:

“Applying Power to the SonicWALL CSM” on page 6

“Accessing the SonicWALL Management Interface” on page 7

“Configuring Your SonicWALL CSM Using the Setup Wizard” on page 9

“Connecting the SonicWALL CSM to Your Network” on page 14

“Registering Your SonicWALL CSM” on page 17

“Understanding the *Default Policy” on page 21

“Verifying the *Default Policy” on page 23

“Integrating the SonicWALL CSM with Microsoft Active Directory” on page 24

Note: After step 7, the SonicWALL CSM is fully functional, using the built-in *Default

Policy to filter content. Continue to step 8 to further customize your installation.

Applying Power to the SonicWALL CSM

To apply power to your SonicWALL CSM appliance:

1. Plug the power cord into the back panel of the SonicWALL CSM and into an

appropriate power outlet.

2. Turn on the SonicWALL CSM appliance using the On/Off switch located on the back

panel of the appliance.

The Power LED shines green when you activate the power switch. The Test LED and

Alarm LED light up and may blink while the appliance performs a series of diagnostic

tests. When the Test LED and Alarm LED are no longer lit, the SonicWALL CSM is ready

for configuration.

SonicWALL CSM Series Appliance Getting Started Guide Page 7

Accessing the SonicWALL Management Interface

To access the Web-based management interface of the SonicWALL CSM, configure your

out-of-band management station (the computer you are using to manage the SonicWALL

CSM) with the following static TCP/IP address properties:

• IP address: Use an available IP address on the 192.168.168.0/24 subnet. For

example, 192.168.168.20.

• Subnet mask: 255.255.255.0

• DNS settings: You do not need to configure the default gateway or DNS

settings.

For help configuring a static IP address, refer to “Configuring Static IP” on page 33.

When you have configured the static IP address and subnet mask on your management

station, perform the following steps to access the SonicWALL CSM management

interface:

1. Connect one end of the red crossover Ethernet cable to the Ethernet port of the out-

of-band management station. Connect the other end of the red crossover cable to

the X2 port on the SonicWALL CSM.

Note: The X2 port is for out-of-band management and has no network connection.

2. Start your Web browser.

Alert: Your Web browser must support Java and HTTP uploads. Internet Explorer 5.0

or higher or Netscape Navigator 4.0 or higher are recommended.

Page 8

3. Enter http://192.168.168.168 in the Location or Address field and press Enter on

your keyboard.

Note: For additional security, you may also access the appliance using HTTPS.

4. In the SonicWALL CSM authentication page, enter admin in the Name field and

password in the Password field and click Login. The Setup Wizard page is

displayed.

5. Unable to connect?

If you cannot connect to the SonicWALL CSM, verify the following configurations:

• Did you correctly enter the SonicWALL CSM X2 management IP address,

http://192.168.168.168, in your Web browser?

• Did you change the TCP/IP network settings on your computer?

• Did you use the red crossover Ethernet cable to connect your out-of-band

management station to the X2 (out-of-band management) port on your

SonicWALL CSM?

SonicWALL CSM Series Appliance Getting Started Guide Page 9

3Configuring Your SonicWALL CSM Using the Setup Wizard

The SonicWALL CSM Setup Wizard page automatically displays after the CSM is

properly powered on and configured for and connected to your management station. The

Setup Wizard allows you to configure the following components:

• Password

•Timezone

• Network setup

To configure your SonicWALL CSM using the Setup Wizard, perform the following steps:

1. The SonicWALL Setup Wizard will automatically launch.

2. The Welcome to the SonicWALL Configuration Wizard screen displays. Confirm

that the radio button next to Setup Wizard is selected and click Next> to continue.

3. In the Change Password screen, you will be prompted to create a new password.

The Old Password is pre-populated. Enter a new password in the New Password

field and re-enter it in the Confirm field. Click Next> to continue. Passwords are

case-sensitive.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SonicWALL Netzwerk-Hardware Handbücher

SonicWALL

SonicWALL PRO 4100 Bedienungsanleitung

SonicWALL

SonicWALL TELE3 SP Bedienungsanleitung

SonicWALL

SonicWALL 1RK52-110 Betriebsanleitung

SonicWALL

SonicWALL NSa 4650 Bedienungsanleitung

SonicWALL

SonicWALL SSL-R Bedienungsanleitung

SonicWALL

SonicWALL TZ 205 Series Bedienungsanleitung

SonicWALL

SonicWALL Internet Security Appliances Service-Handbuch

SonicWALL

SonicWALL NSA 6600 Betriebsanleitung

SonicWALL

SonicWALL SonicPoint-Ne Bedienungsanleitung

SonicWALL

SonicWALL Zero-Touch Kurzanleitung

SonicWALL

SonicWALL NSa 3700 Bedienungsanleitung

SonicWALL

SonicWALL NSA 5600 Betriebsanleitung

SonicWALL

SonicWALL SonicOSX 7 Bedienungsanleitung

SonicWALL

SonicWALL NSa 9250 Bedienungsanleitung

SonicWALL

SonicWALL Email Security 200 Bedienungsanleitung

SonicWALL

SonicWALL 1RK38-0C8 Betriebsanleitung

SonicWALL

SonicWALL SonicPoint-N Dual-Band Bedienungsanleitung

SonicWALL

SonicWALL NSa 4700 Betriebsanleitung

SonicWALL

SonicWALL ECLASS NSA E5500 Bedienungsanleitung

SonicWALL

SonicWALL SRA 1200 Bedienungsanleitung

SonicWALL

SonicWALL NSA 3600 Betriebsanleitung

SonicWALL

SonicWALL SuperMassive 9200 Bedienungsanleitung

SonicWALL

SonicWALL NSA 2400MX Bedienungsanleitung

SonicWALL

SonicWALL ECLASS NSA E8500 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung