SonicWALL ECLASS NSA E8500 Bedienungsanleitung

NSA E8500 Getting Started Guide

NSA_E8500_GSG.book Page 1 Friday, January 21, 2011 4:17 PM

SonicWALL NSA E8500 Getting Started Guide Page 1

SonicWALL NSA E8500

Getting Started Guide

Welcome to Dynamic Security for the Global Network™.

The SonicWALL® E-Class Network Security Appliance (NSA)

E8500 is designed to be the most scalable, reliable, and best

performing multifunction threat appliance in its class.

This Getting Started Guide provides instructions for basic

installation and configuration of the SonicWALL NSA E8500.

Setup

Additional Configuration and Information

•Support and Training Options - page 51

•Product Safety and Regulatory Information - page 65

Step Procedure Est. Time

Pre-Configuration Tasks - page 3

Registering Your Appliance - page 13

Deployment Scenarios - page 19

Additional Deployment Configuration - page 41

Rack Mounting Instructions - page 59

NSA_E8500_GSG.book Page 1 Friday, January 21, 2011 4:17 PM

Page 2 SonicWALL NSA E8500

SonicWALL NSA E8500

Note: Always observe proper safety and regulatory guidelines when removing administrator-serviceable parts from the SonicWALL

NSA E8500. Proper guidelines can be found in the Product Safety and Regulatory Information section, on page 65 of this guide.

E8500

Network Security Appliance

NSA_E8500_GSG.book Page 2 Friday, January 21, 2011 4:17 PM

SonicWALL NSA E8500 Getting Started Guide Page 3

Pre-Configuration Tasks

In this Section:

This section provides pre-configuration information. Review this section before setting up your SonicWALL NSA E8500.

•Check Package Contents - page 4

•Obtain Configuration Information - page 5

•The Front Panel - page 6

•The Back Panel - page 7

•Front Bezel Control Features - page 8

•LAN IP Configuration Example - page 12

NSA_E8500_GSG.book Page 3 Friday, January 21, 2011 4:17 PM

Page 4 Check Package Contents

Check Package Contents

Before setting up your SonicWALL NSA E8500, verify that your

package contains the following parts:

SonicWALL NSA E8500

Rack Kit

DB9 -> RJ45 (CLI) Cable

Standard Power Cord (2)*

Ethernet Cable

Red Crossover Cable

Getting Started Guide

Any Items Missing?

If any items are missing from your package, please contact

SonicWALL support.

A listing of the most current support options is available online at:

<http://www.sonicwall.com/us/support.html>

*The included power cord is intended for use in North America only. The power

cord is for AC mains installation only. Field conversion DC power cable is

different, see “Safety and Regulatory Information” on page 66 for more

information. For European Union (EU) customers, a power cord is not included.

(x2)

76543

E8500

Network Security Appliance

NSA_E8500_GSG.book Page 4 Friday, January 21, 2011 4:17 PM

SonicWALL NSA E8500 Getting Started Guide Page 5

Obtain Configuration Information

Please record and keep for future reference the following setup

information:

Registration Information

Networking Information

Administrator Information

Obtain Internet Service Provider (ISP) Information

Record the following information about your current Internet service:

Note: If you are not using one of the network configurations

above, refer to the SonicOS Enhanced Administrator’s

Guide <http://www.sonicwall.com/us/support.html>.

Serial Number:

Record the serial number found on the

bottom panel of your SonicWALL

appliance.

Authentication Code:

Record the authentication code found on

the bottom panel of your SonicWALL

appliance.

LAN IP Address:

. . .

Select a static IP address for your

SonicWALL appliance that is within the

range of your local subnet. If you are

unsure, you can use the default IP

address (192.168.168.168).

Subnet Mask:

. . .

Record the subnet mask for the local

subnet where you are installing your

SonicWALL appliance.

Ethernet WAN IP

Address:

. . .

Select a static IP address for your

Ethernet WAN. This setting only applies

if you are already using an ISP that

assigns a static IP address.

Admin Name:

Select an administrator account name.

(default is admin)

Admin Password:

Select an administrator password.

(default is password)

If You connect

using Please record

DHCP No information is usually required: Some providers

may require a Host name:

Static IP IP Address: . . .

Subnet Mask: . . .

Default Gateway: . . .

Primary DNS: . . .

DNS 2 (optional): . . .

DNS 3 (optional): . . .

NSA_E8500_GSG.book Page 5 Friday, January 21, 2011 4:17 PM

Page 6 The Front Panel

The Front Panel

E8500

Network Security Appliance

LCD Screen

Control Buttons

Console Port

USB Ports (2)

Reset Button

LED Indicators (left to right)

HA Port

X4-X7 (SFP)

X0-X3 (Copper)

Bypass Status LED

Access the SonicOS Command Line Interface

(CLI) via the DB9 -> RJ45 cable

For future feature extensions

Press and hold for several seconds to

manually reset the appliance

High speed Gigabit Ethernet ports

Lit: Indicates when fail to wire bypass

mode is armed

Power (2): Blue: Indicates power supplies are operating correctly,

yellow: Indicates an unconnected power supply or failure

Test: Quick blinking: Initializing, slow blinking: SafeMode

solid: test mode.

Alarm: alarm condition

HD: Future extension

Navigate the LCD screen

interface to display status, make

conﬁguration changes, restart the

appliance or boot into SafeMode

Hot-pluggable “small form-factor

pluggable transceiver” interfaces

for high speed ﬁber or copper

Ethernet communication

High Availability

primary/secondary

Gigabit Ethernet port

NSA_E8500_GSG.book Page 6 Friday, January 21, 2011 4:17 PM

SonicWALL NSA E8500 Getting Started Guide Page 7

The Back Panel

Note: See the Safety and Regulatory Information section, on page 66 for important additional information on power supply

requirements for the NSA E8500 appliance.

Expansion Bay

Fans (2)

Power Supplies (2)

For SonicWall approved

expansion modules

Dual auto-throttling fans for system

temperature control

Dual power supplies for redundant AC power and added reliability

Field conversion is available to convert to DC mains

DC power supplies use different input connector and power cables

NSA_E8500_GSG.book Page 7 Friday, January 21, 2011 4:17 PM

Page 8 Front Bezel Control Features

Front Bezel Control Features

The SonicWALL Network Security Appliance E-Class is

equipped with a front panel bezel interface that allows an

administrator to customize certain aspects of the appliance or

simply monitor its status without having to log into it through a

separate terminal.

Note: Using the front bezel for configuration purposes prior to

completing initial setup will bypass the Setup Wizard’s

automatic launch at startup.

LCD Control Buttons

The LCD interface is controlled by a D-pad, consisting of four

buttons: up, down, left, right. The table below describes the

functions of the buttons:

Icon Feature Description

LCD

Screen Displays the front panel bezel interface

which can be used to display status

information, perform basic

configurations, restart the appliance or

boot the appliance in SafeMode.

Control

Buttons Up, Down, Left and Right buttons,

used to navigate the LCD menu

system.

Network Security Appliance

Button Navigation Features

Up/Down Selects options and navigates up and

down lists.

Left Cancels changes and returns to the

previous menu.

Right Confirms choices and enters menus.

Also sets the appliance to screen-saver

mode when used from the main menu.

NSA_E8500_GSG.book Page 8 Friday, January 21, 2011 4:17 PM

SonicWALL NSA E8500 Getting Started Guide Page 9

Main Menu

Upon booting the LCD display will initially show the Main Menu.

The menu is made up of four options:

Use the Up and Down button to select the menu you wish to

enter and click the Right button to enter it.

Status

The Status menu allows you to view specific aspects of the

appliance. Once selected, the LCD displays the Status List.

This list is navigated using the Up and Down buttons. Status

options available include:

• Appliance serial number

• Firmware / ROM versions

• Appliance name

• Date and Time

• Uptime

• CPU statistical readings

• Current number of connections

• Interface (X0, X1) network settings

• Interface (X0, X1) data transfer statistics

The X1 DNS1-3 entries will only be displayed if they have been

set from the Configure menu. If their value is still 0.0.0.0 (default

value), they will not appear in the Status List.

Contains basic status values including

system resources, connections and port

configuration values.

Allows configuration of basic system

values including X0 (LAN) and X1

(WAN) port configuration. Requires

system pin for access, default: 76642.

Provides the ability to restart the

appliance. Requires system pin for

access.

Provides the ability to restart and boot

the appliance into SafeMode. Requires

system pin for access.

NSA_E8500_GSG.book Page 9 Friday, January 21, 2011 4:17 PM

Inhaltsverzeichnis

Andere SonicWALL Netzwerk-Hardware Handbücher

SonicWALL

SonicWALL ECLASS NSA E5500 Bedienungsanleitung

SonicWALL

SonicWALL NSa 4700 Betriebsanleitung

SonicWALL

SonicWALL Zero-Touch Kurzanleitung

SonicWALL

SonicWALL TZ 205 Series Bedienungsanleitung

SonicWALL

SonicWALL NSA 6600 Betriebsanleitung

SonicWALL

SonicWALL NSa 4650 Bedienungsanleitung

SonicWALL

SonicWALL 1RK52-110 Betriebsanleitung

SonicWALL

SonicWALL NSa 3700 Bedienungsanleitung

SonicWALL

SonicWALL NSA 5600 Betriebsanleitung

SonicWALL

SonicWALL 1RK38-0C8 Betriebsanleitung

SonicWALL

SonicWALL NSa 9250 Bedienungsanleitung

SonicWALL

SonicWALL SRA 1200 Bedienungsanleitung

SonicWALL

SonicWALL TELE3 TZ Bedienungsanleitung

SonicWALL

SonicWALL SonicPoint-N Dual-Band Bedienungsanleitung

SonicWALL

SonicWALL SuperMassive 9200 Bedienungsanleitung

SonicWALL

SonicWALL TELE3 SP Service-Handbuch

SonicWALL

SonicWALL UMA EM5000 Bedienungsanleitung

SonicWALL

SonicWALL ESA 5000 Bedienungsanleitung

SonicWALL

SonicWALL SonicOSX 7 Bedienungsanleitung

SonicWALL

SonicWALL SonicPoint-Ne Bedienungsanleitung

SonicWALL

SonicWALL TELE3 SP Bedienungsanleitung

SonicWALL

SonicWALL PRO 4100 Bedienungsanleitung

SonicWALL

SonicWALL Content Security Manager 2200 Bedienungsanleitung

SonicWALL

SonicWALL NSA 2400MX Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung