Sonoff Slampher Bedienungsanleitung

SLAMPHER USER GUIDE

Hi, welcome to use Slampher RF！

1. Download “eWeLink” app.

Search “eWeLink” in APP Store for iPhone or Google play for Android.

2. Screw Slampher with E27 light bulb.

3. Add device

1. Power up the device after you complete the installation. Press the pairing

button once to turn off the lamp first.

2. Press the button for 7 seconds until the green LED fast blinks. Due to

this model has used different firmware and module, the led has two

blinking ways.

Open eWeLink, click”+”, you’ll see the pairing icons. Please select the

pairing mode according to below instructions:

If the led blinks like this: please select Quick Pairing Mode

(TOUCH), tap Next.

If the led blinks like this:

a. If the device firmware is 1.6.0 or higher, please select Quick Pairing

Mode (TOUCH). Otherwise, it will fail to add the device. Click Next.

b. If the firmware of above models is lower than 1.6.0, please

select Compatible Pairing Mode (AP) icon, click Next. iOS users

should go to Phone Setting>WiFi>connect the WiFi begins with ITEAD-

******, enter default password 12345678. Go back to eWeLink, click next.

3. It will auto-search and connect the smart home device around you.

4. Input your home SSID & password:

4.1 If no password, keep it blank.

4.2 Now eWeLink only support 2.4G WiFi communication protocol, 5G-

WiFi is not supported.

5. Name the device to complete.

6. Maybe the device is “Offline” on eWeLink, for the device needs 1 minute

to connect with your router and server. When the green LED on, the device

is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re-

open.

433MHz remote control (Sonoff RF module)

For the old models that deliver before June 1st, 2018, please learn as

below:

3.1. Learning:

For the old models that deliver before June 1st, 2018, please learn as

below:

Fast press the pairing button on Slampher twice, the red LED blinks once,

then press one of the buttons of your RF controller to set pairing for 1-2

second.

Note: One Slampher can be learned with only one button of the 433MHz

RF Remote.

For the new models that deliver on and after June 1st, 2018, please learn as

below:

Press and hold the pairing button on Slampher for 3s, you see the red led

blinks once. Press a button on RF Remote, and it will be learned

successfully.

Note: One Slampher can learn with 14 RF Remote buttons. The 15th RF

button will cover the first button that has been learned.

3.2. Clear coding:

For the old models that deliver before June 1st, 2018, please clear as below:

Fast press the pairing button on Slampher for three times, the red LED is

on for 3s, that means the RF controller code has been cleaned. If you failed

to pair, please try to clean first.

For the new models that deliver on and after June 1st, 2018, please clear as

below:

Press and hold pairing button on Slampher for 5s, you see the red led

blinks twice. Press the button on the RF Remote, the code will be cleared.

4. APP features

1. WiFi remote control and device state

Turn on/off by tapping on device icon. Device state always simultaneous

display on APP.

2. Share Control

The owner can share the devices to other eWeLink accounts. While sharing

devices, both should stay online on eWeLink. Because if the account you

want to share is not online, he/she will not receive the invitation message.

How to make it possible? Firstly click Share, input the eWeLink account

(phone number or email address) you want to share, tick the timer

permissions (edit/delete/change/enable) you want to give, then click Next.

The other account will receive an invitation message. Click Accept, the

device has shared successfully. The other user will have access to control

the device.

3. Timing

Support max 8 enabled single/repeat/countdown timing schedules each

device.

4. Scene/Smart Scene

Scene allows triggering on/off your devices automatically. Scene Settings is

in the upper right corner of Device List. You can set up scenes or smart

scenes to trigger on/off the device.

Users should select “Click to execute” in the condition, add different

existing devices, name the scene and save it.

5. Security mechanism

One device one owner. Other people can not add the devices that have

already been added. If you want to add your device to another account,

don’t forget to delete it first.

6. Update

It will auto-remind you of new firmware or version. Please update as soon

as you can.

5. Problems and solutions

Read the detailed FAQ on Itead Smart Home Forum. If below answers

can’t solve your problem, please submit a feedback on eWeLink.

1. My device has added successfully but stays “Offline”.

Answers: The newly added device need 1-2 min to connect to your router

and the Internet. If it stays offline for a long time, please judge the problem

by the green led status:

1.1. Green led quickly blinks one time and repeats, which means device

failed to connect to the router. The reason may be you have entered wrong

WiFi password or your device is too far away from the router, which causes

a weak WiFi signal. The device can not be added to the 5G-wifi-router, only

the 2.4G-wifi is OK. At last, make sure that your router is MAC-open.

1.2. Green led slowly blinks one time and repeats, which means the device

has connected to router and server but failed to be added to the device list.

Then power on the device again, if it still not working, just add the device

again.

1.3. Green led quickly blinks twice and repeats, this means the device has

connected to the router but failed to connect to the server. Then please

confirm your WiFi router works normally.

2. Why the APP can’t find the device in pairing status?

Answers: That’s because of your phone’s cache. Please close the WLAN of

your phone then open it after a minute. At the same time, please power off

the device if you can, then power up to try again.

3. My WiFi is expired, can I connect the devices to LAN?

Answers: the Slampher supports to be controlled by LAN(Update in

15/10/2017, LAN function has been stopped).

Andere Handbücher für Slampher

Inhaltsverzeichnis

Andere Sonoff Wohnraumbeleuchtung Handbücher

Sonoff

Sonoff L3 Bedienungsanleitung

Beliebte Wohnraumbeleuchtung Handbücher anderer Marken

JONATHAN Y

JONATHAN Y JYL5019A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL6007A Bedienungsanleitung

Philips

Philips Ledino 31606/11/16 Bedienungsanleitung

Salus

Salus UG600 Bedienungsanleitung

Safavieh Lighting

Safavieh Lighting CANDRI TBL4427A Bedienungsanleitung

Hunter

Hunter Bullet Spotlight Kit Gebrauchsanweisung

Philips

Philips Ledino 16811/87/16 Bedienungsanleitung

Philips

Philips 405441213 Bedienungsanleitung

Philips

Philips Halogen Light Bedienungsanleitung

Pentair

Pentair GLOBRITE Bedienungsanleitung

Philips

Philips 55592-30-16 Bedienungsanleitung

Livoo

Livoo Night light Bedienungsanleitung

Schwaiger

Schwaiger NFL45 Bedienungsanleitung

FRITZ HANSEN

FRITZ HANSEN AQ01 PLUG-IN Bedienungsanleitung

MOOD

MOOD CORSIN JY-16 Bedienungsanleitung

Safavieh Lighting

Safavieh Lighting KREMP TBL4409A Bedienungsanleitung

JONATHAN Y

JONATHAN Y JYL8019 Bedienungsanleitung

XTRASUN

XTRASUN XTDEOKT1 Bedienungsanleitung