Sony XR-C33R Bedienungsanleitung

2000 Sony Corporation

FM/MW/LW

Cassette

Car Stereo

XR-C33R

XR-3100R

For installation and connections, see the supplied installation/connections

manual.

Informace o instalaci a zapojení naleznete v přiložené příručce Instalace /

zapojení.

Szczegóły otyczące instalacji i po łączeń, proszę spraw zić w ostarczonym,

osobnym po ręczniku

Kurma ve bağlantı işlemleri için ünite beraberindeki Kurma/Bağlantılar kılavuzuna

bakınız.

Перед установкой и подсоединениями прочитайте прилагаемую

инструкцию по установке и подсоединению.

3-043-533-41 (1)

Operating Instructions

Návo k obsluze

Instrukcje Obsługi

Kullanım kılavuzu

Инструкция по эксплуатации

Welcome !

Thank you for purchasing this Sony Cassette

Player. This unit lets you enjoy a variety of

features using the following controller

accessory:

Optional accessory

Rotary commander (RM-X4S)

XR-C33R only:

In addition to the cassette playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*1.

When you operate this unit or a connected

optional CD unit with the CD TEXT function,

the CD TEXT information will appear in the

display when you play a CD TEXT disc*2.

*1You can connect a CD changer, an MD changer,

a CD player, or an MD player.

*2A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names.

This information is recorded on the disc.

Precautions

•If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

•If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

•If no sound comes from the speakers of a

two-speaker system, set the fader control to

the centre position.

•When a tape is played back for a long period,

the cassette may become warm because of

the built-in power amplifier. However, this is

not a sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

To maintain high quality sound

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the car audio. Sugary

residues on this unit or cassette tapes may

contaminate the playback heads, reduce the

sound quality, or prevent sound reproduction

altogether.

Cassette cleaning kits cannot remove sugar

from the tape heads.

Notes on Cassettes

Cassette care

•Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

•Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

•Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

•Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

•Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

•The sound may become distorted while

playing the cassette. The cassette player head

should be cleaned after each 50 hours of use.

Slack

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is

not recommended except for long continuous

play. The tape used for these cassettes is very

thin and tends to stretch easily. Frequent

playing and stopping of these tapes may cause

them to become entangled in the cassette deck

mechanism.

Table of Contents

This Unit Only

Location of controls ................................................. 5

Getting Started

Resetting the unit ................................................ 6

Detaching the front panel .................................. 6

Setting the clock .................................................. 7

Cassette Player

Listening to a tape ............................................... 8

Playing a tape in various modes ....................... 9

Radio

Memorising stations automatically

— Best Tuning Memory (BTM) .................... 9

Memorising only the desired stations ............ 10

Receiving the memorised stations .................. 10

RDS

Overview of the RDS function ......................... 11

Displaying the station name ............................. 11

Retuning the same programme automatically

— Alternative Frequencies (AF) ................ 12

Listening to traffic announcements ................ 13

Presetting the RDS stations with the AF

and TA data ................................................... 14

Locating a station by programme type .......... 15

Setting the clock automatically ....................... 16

Other Functions

Labelling the rotary commander .................... 16

Using the rotary commander .......................... 17

Adjusting the sound characteristics ............... 18

Attenuating the sound ..................................... 18

Changing the sound and display settings ..... 19

Boosting the bass sound

— D-bass ....................................................... 19

With Optional Equipment

CD/MD Unit (XR-C33R only)

Playing a CD or MD ......................................... 20

Playing tracks repeatedly

— Repeat Play .............................................. 21

Playing tracks in random order

— Shuffle Play .............................................. 22

Additional Information

Maintenance ....................................................... 22

Dismounting the unit ....................................... 23

Specifications ..................................................... 24

Troubleshooting guide ..................................... 25

Location of controls

Refer to the pages listed for details.

1SEEK/AMS (seek/Automatic Music

Sensor/manual search) control

8, 10, 15, 21

2MODE (*)button

During tape playback:

Playback direction change 8

During radio reception:

BAND select 9, 10

During CD or MD playback:

CD/MD unit select 20

3SOURCE (TAPE/TUNER/CD/MD) button

8, 9, 10 13, 20

4Dial (volume/bass/treble/left-right/rear-

front control) 7, 18

5SOUND button 18

6Display window

7DSPL (display mode change) button

8, 11, 20

86(eject) button 8

9PTY button

RDS Programme 15

!º PRESET/DISC button (XR-C33R)

During radio reception:

Preset stations select 10

During CD/MD playback:

Disc change 21

PRST button (XR-3100R)

During radio reception:

Preset stations select 10

!¡ AF/TA button 12, 13, 14

!™ RELEASE (front panel release) button

6, 23

!£ Reset button (located on the front side

of the unit behind the front panel) 6

!¢ OFF button 6, 8

!∞ SHIFT button

PLAY MODE 9, 10, 11, 12, 14, 21, 22

SET UP 7, 16, 19, 20

!§ POWER SELECT switch

(located on the bottom of the unit)

See “POWER SELECT switch” in the

Installation/Connections manual.

!¶ Number buttons 10, 13, 14

!• D-BASS control 19

The illustration of the front panel in the manual is

of XR-C33R.

D-BASS

AF/TAPTYDSPL

DISC

PRESET +

–

OFF 123

SOURCE

MODE

SEEK / AMS

RELEASE

SOUND

OFF SHIFT SET UP

PLAY MODE

564321

XR-C33R

Attaching the front panel

Attach part aof the front panel to part bof

the unit as illustrated and push the left side

into position until it clicks.

Notes

• Be sure not to attach the front panel upside

down.

•Do not press the front panel too hard against the

unit when attaching it.

•Do not press too hard or put excessive pressure

on the display window of the front panel.

•Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the ignition key switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds

(only when the POWER SELECT switch on the

bottom of the unit is set to the Aposition).

If you connect an optional power amplifier and

do not use the built-in amplifier, the beep

sound will be deactivated.

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a

ballpoint pen.

Note

Pressing the reset button will erase the clock

setting and some memorised functions.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1Press (OFF).

2Press (RELEASE), then slide the front

panel a little to the left, and pull it off

towards you.

Notes

• Be sure not to drop the panel when detaching it

from the unit.

•If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

•When carrying the front panel with you, use the

supplied front panel case.

Reset button

(OFF)

(RELEASE)

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1Press (SHIFT), then press (2) (SET UP)

repeatedly until “CLOCK” appears.

1Press (4) (n).

The hour indication flashes.

2Set the hour.

3Press (4) (n).

The minute indication flashes.

4Set the minute.

to go forward

to go backward

to go forward

to go backward

2Press (SHIFT).

The clock starts.

3Press (SHIFT).

After the clock setting is complete, the

display returns to normal playback mode.

Note

If the POWER SELECT switch on the bottom of the

unit is set to the Bposition, turn the power on

first, then set the clock.

Cassette Player

Listening to a tape

Insert a cassette.

Playback starts automatically.

If a cassette is already inserted, press

(SOURCE) repeatedly until “FWD” or “REV”

appears to start playback.

The side facing up is played.

The side facing down is played.

Tip

To change the tape‘s playback direction, press

(MODE) (*).

To Press

Stop playback (OFF)

Eject the cassette 6

Fast-winding the tape

During playback, push the SEEK/AMS

control up or down and hold.

To start playback during fast-forwarding or

rewinding, press (MODE) (*).

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS

control up or down and release for each

track you want to skip.

You can skip up to nine tracks at one time.

Note

The AMS function may not work when:

— the blanks between tracks are shorter than

four seconds

— there is noise between tracks

— there are long sections of low volume or quiet

sections.

Changing the display item

Each time you press (DSPL), the item changes

as follows:

zTape playback zClock

Frequency*Z

*While either of the following functions are

activated.

— ATA function

— AF/TA function

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 19).

To locate

preceding tracks

To locate

succeeding tracks

Rewind

Fast-forward

SEEK / AMS

Playing a tape in various

modes

You can play the tape in various modes:

•REP (Repeat Play) repeats the current track.

•METAL (Metal) lets you play a metal or CrO2

tape.

•BL SKP (Blank Skip) skips blanks longer than

eight seconds.

•ATA (Automatic Tuner Activation) turns on

the tuner automatically when fast-winding

the tape.

1During playback, press (SHIFT).

“SHIFT-ON” appears in the display.

2Press (3) (PLAY MODE) repeatedly until

the desired play mode appears.

Each time you press (3) (PLAY MODE),

the item changes as follows:

REP nMETALnBL SKP nATA

3Press (4) (n) to select “ON.”

Play mode starts.

4Press (SHIFT).

To return to normal playback mode, select

“OFF” in step 3 above.

Note

If the “SFT” indication appears, press (SHIFT) to

complete the mode setting.

Radio

Memorising stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorises them in the order of

their frequencies. You can store up to 6 stations

on each band (FM1, FM2, FM3, MW, and LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

zTUNER zCD*zMD*zTAPE

*If the corresponding optional equipment is

not connected, this item will not appear

(XR-C33R only).

2Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

zFM1 zFM2 zFM3 zMW zLW

3Press (SHIFT), then press (3) (PLAY

MODE) repeatedly until “B.T.M” appears.

4Press (4) (n).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

5Press (SHIFT).

Notes

•The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

•When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

Memorising only the

desired stations

You can preset up to 18 FM stations (6 each for

FM1, 2, and 3), up to 6 MW stations, and up to

6 LW stations in the order of your choice.

1Press (SOURCE) repeatedly to select the

tuner.

2Press (MODE) repeatedly to select the

band.

3Push the SEEK/AMS control up or down

to tune in the station that you want to

store on the number button.

4Press and hold the desired number

button ((1) to (6)) until “MEM” appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

Receiving the memorised

stations

1Press (SOURCE) repeatedly to select the

tuner.

2Press (MODE) repeatedly to select the

band.

3Press the number button ((1) to (6)) on

which the desired station is stored.

Tip

Press either side of (PRESET/DISC) ((PRST)) to

receive the stations in the order they are stored in

the memory (Preset Search Function).

If you cannot tune in a preset

station

Push and release the SEEK/AMS control

up or down to search for the station

(automatic tuning).

Scanning stops when the unit receives a

station. Push the SEEK/AMS control up or

down repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(SHIFT), then press (3) (PLAY MODE) repeatedly

until “LOCAL” (local seek mode) is displayed. Then

press (4) (n) to select “LOCAL-ON.” Press (SHIFT).

Only the stations with relatively strong signals will

be tuned in.

Tip

If you know the frequency of the station you want

to listen to, push the SEEK/AMS control up or

down and hold until the desired frequency

appears (manual tuning).

Andere Handbücher für XR-C33R

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Sony Autoradiosystem Handbücher

Sony

Sony CDX-65RF - Cd Changer Bedienungsanleitung

Sony

Sony CDX-M7810 - Fm/am Compact Disc Player Bedienungsanleitung

Sony

Sony CDX-GT565UP Bedienungsanleitung

Sony

Sony DSX-GS80 Bedienungsanleitung

Sony

Sony CDX-M850MP (XT-XM1) Bedienungsanleitung

Sony

Sony CDX-GT08 (CDXGT08) Bedienungsanleitung

Sony

Sony XAV-A1 - Av Center Bedienungsanleitung

Sony

Sony MEX-DV1100 Bedienungsanleitung

Sony

Sony CDX-MP450X Primary User Manual (English Bedienungsanleitung

Sony

Sony MEX-BT2900 Produkthandbuch

Sony

Sony XR-C6090 Bedienungsanleitung

Sony

Sony XR-L500 Bedienungsanleitung

Sony

Sony DSX-A416BT Bedienungsanleitung

Sony

Sony XS-GTR1720 Bedienungsanleitung

Sony

Sony CDX-L450X Operating Instructions (English,... Produkthandbuch

Sony

Sony MEX-BT2500 Bedienungsanleitung

Sony

Sony MEX-N4380BT Bedienungsanleitung

Sony

Sony XA 300 Bedienungsanleitung

Sony

Sony CDX-GT65UIW Bedienungsanleitung

Sony

Sony CDX-525RF - Compact Disc Changer System Bedienungsanleitung

Sony

Sony MEXBT2700 - CD Receiver With Bluetooth... Bedienungsanleitung

Sony

Sony CDX-S2010C Bedienungsanleitung

Sony

Sony Pressman TCM-5000EV Bedienungsanleitung

Sony

Sony CDX-MR60UI Produkthandbuch

Beliebte Autoradiosystem Handbücher anderer Marken

JL Audio

JL Audio Stealthbox SB-CAN-G2MVX3D/10TW3 Bedienungsanleitung

Clarion

Clarion PU-9836A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AR0M Bedienungsanleitung

Insignia

Insignia NS-HD5113 Bedienungsanleitung

Clarion

Clarion BTD3341 Bedienungsanleitung

USA SPECS

USA SPECS PA11-VW6 Bedienungsanleitung

Kenwood

Kenwood KCD-BT6544U/UY Bedienungsanleitung

JVC

JVC KD-DB912BT Bedienungsanleitung

Philips

Philips CSQ405/98 Bedienungsanleitung

Alpine

Alpine TDM-7544 Bedienungsanleitung

Autotek

Autotek TransAm TA 1400 Bedienungsanleitung

Clarion

Clarion PN-3124N-A Bedienungsanleitung

Denso TEN

Denso TEN FT0108A Bedienungsanleitung

Pyle

Pyle PLD57MU Bedienungsanleitung

Harman

Harman Chrysler Radio Navigation System RB4 Bedienungsanleitung

Clarion

Clarion VS735 Bedienungsanleitung

JVC

JVC KW-R910BT Bedienungsanleitung

Eclipse

Eclipse CD2000 Bedienungsanleitung