Sony CDP-CX350 - 300 Disc Cd Changer Bedienungsanleitung

3-866-363-23 (1)

1999 by Sony Corporation

CDP-CX350

Compact Disc

Player

Operating Instructions

Mode d’emploi

2GB

WARNING

To prevent fire or shock

hazard, do not expose

the unit to rain or

moisture.

To avoid electrical shock,

do not open the cabinet.

Refer servicing to

qualified personnel only.

This appliance is classified as a CLASS 1

LASER product.

The CLASS 1 LASER PRODUCT

MARKING is located on the rear

exterior.

Welcome!

Thank you for purchasing the Sony

Compact Disc Player. Before operating

the unit, please read this manual

thoroughly and retain it for future

reference.

About This Manual

The instructions in this manual are for

model CDP-CX350.

Conventions

• Instructions in this manual describe

the controls on the player.

You can also use the controls on the

remote if they have the same or

similar names as those on the player.

• The following icons are used in this

manual:

Indicates that you can do the

task using the remote.

Indicates hints and tips for

making the task easier.

This equipment is intended for home

entertainment purposes only. The

warranty shall be invalidated if used

in commercial environments, such as

by disc jockeys, etc., even within the

Warranty Period.

For the customers in Canada

CAUTION

TO PREVENT ELECTRIC SHOCK, DO

NOT USE THIS POLARIZED AC PLUG

WITH AN EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET

UNLESS THE BLADES CAN BE FULLY

INSERTED TO PREVENT BLADE

EXPOSURE.

3GB

TABLE OF CONTENTS

Getting Started

Unpacking............................................................................................................................. 4

Hooking Up the System...................................................................................................... 4

About the Supplied Remote Commander........................................................................ 5

Setting Up the Remote ........................................................................................................ 6

Connecting Another CD Player ......................................................................................... 9

Inserting CDs...................................................................................................................... 10

Playing a CD.......................................................................................................................... 12

Playing CDs

Using the Display .............................................................................................................. 14

Locating a Specific Disc .................................................................................................... 16

Specifying the Next Disc to Play ..................................................................................... 18

Playing the Disc Which was Just Inserted – Easy Play ................................................ 18

Locating a Specific Track or a Point in a Track ............................................................. 19

Playing Repeatedly............................................................................................................ 21

Playing in Random Order (Shuffle Play) ....................................................................... 21

Creating Your Own Program (Program Play)............................................................... 22

Playing Using a Timer....................................................................................................... 26

Controlling Another CD Player (Advanced Mega Control) ....................................... 27

Fading In or Out................................................................................................................. 28

Playing Alternately (No-Delay Play/X-Fade Play) ...................................................... 29

Controlling the Player by Another unit.......................................................................... 29

Storing Information About CDs (Custom Files)

What You Can Do With the Custom Files ..................................................................... 30

Labeling Discs (Disc Memo)............................................................................................. 30

Storing Custom File Information Using a Keyboard.................................................... 34

Storing Specific Tracks (Delete Bank) ............................................................................. 34

Grouping Discs (Group File)............................................................................................ 35

Storing Your Favorite Tracks (Hit List) .......................................................................... 38

Additional Information

Precautions ......................................................................................................................... 40

Notes on CDs...................................................................................................................... 40

Troubleshooting .................................................................................................................41

Specifications ...................................................................................................................... 41

Index.......................................................................................................................................... 42

4GB

Getting StartedGetting Started

Hooking Up the System

Overview

This section describes how to hook up the CD player to

an amplifier. Be sure to turn off the power of each

component before making the connections.

Unpacking

Check that you received the following items:

• Audio cord (1)

• CD booklet holders (3) and label (1)

• Remote commander (remote) (1)

• Size AA (LR6) batteries (3)

How to use the CD booklet holder

The CD booklet holder helps you locate discs easily.

After you have inserted discs into the player, you can put

the CD booklet (which comes with a CD) into the

supplied holder. Put two CD booklets facing back to back

into a pocket. Stick the number label on each pocket,

matching the number of the disc slot where you have

inserted the disc. You can put up to 300 CD booklets into

the holders.

Inserting batteries into the remote

You can control the player using the supplied remote.

Insert three size AA (LR6) batteries (supplied) by

matching the + and – ends on the batteries to the

diagram inside the battery compartment.

Insert the negative (–) end first, then push in and down

until the positive (+) end clicks into position.

When using the remote, point it at the remote sensor

on the player.

What cords will I need?

Audio cord (1) (supplied)

White

(L)

Red

(R)

White

(L)

Red

(R)

When to replace batteries

If iflashes in the remote’s display, replace all the

batteries with new alkaline batteries. Use of battery types

other than alkaline batteries, such as manganese

batteries, may not last longer than the alkaline batteries.

The loaded memory in the remote will be retained for a

few minutes while you replace the batteries.

CD player

DIGITAL OUT

(OPTICAL)

COMMAND MODE

Amplifier

To line output (L) To line output (R)

To an AC outlet

: Signal flow

To audio input

To an AC outlet

Notes

• Do not leave the remote near an extremely hot or humid

place.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct sunlight or leave

too near lighting apparatuses. Doing so may cause a

malfunction.

• If you do not use the remote for an extended period of time,

remove the batteries to avoid possible damage from battery

leakage and corrosion.

CONTROL A1

Playing CDsGetting Started

5GB

Getting Started

Hookups

When connecting the audio cord, be sure to match the

color-coded cords to the appropriate jacks on the

components: Red (right) to Red and White (left) to

White. Be sure to make connections firmly to avoid

hum and noise.

CD player Amplifier

• If you have a digital component such as a digital

amplifier, D/A converter, DAT or MD

Connect the component via the DIGITAL OUT (OPTICAL)

connector using an optical cable (not supplied). Take off the

cap and plug in the optical cable.

POC-15

Optical cable (not supplied)

CD player Digital component

Note

When you connect via the DIGITAL OUT (OPTICAL)

connector, noise may occur when you play CD software

other than music, such as a CD-ROM.

LINE2ND CD

IN OUT

INPUT

If you have a Sony component with the CONTROL A1

jack

Connect the component via the CONTROL A1 jack.

You can simplify the operation of audio systems

composed of separate Sony components. For details, refer

to the supplementary “CONTROL A1 Control

System” instructions.

DIGITAL OUT

OPTICAL

DIGITAL INPUT

OPTICAL

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

Note on placement of the player

Be sure to place the player in a flat, horizontal place.

If the player is left in a slanted position, it may cause a

malfunction or damage the player.

About the Supplied Remote

Commander

Understanding the 2 way remote system

This remote operates under a 2 way remote system.

With the 2 way remote system, the component

responds to signals sent from the remote by sending

additional signals (information about the status of the

component, text data, etc.) back to the remote. Thus,

operations are performed as a result of communication

between the remote and the component.

When using a home entertainment system comprised

of several components compatible with the 2 way

remote system, please restrict 2 way remote system

operation to a single component. Normally, turn off the

2 way remote system on all components except the

receiver. If you would like to turn off the player’s 2

way remote system, see “Turning off a player‘s

response to remote signals” on page 6.

Component

6GB

Getting Started

Setting Up the Remote

This section describes how to prepare the supplied

remote for operation.

Press I/uon the player to turn the player on.

If the following message appears in the remote’s

display while setting up the remote, point the remote

at the player as illustrated below.

Note that the display disappears automatically if you

don’t proceed for more than a few moments.

Easy scroll

key

30°

I/u

an' t receive

elPaseturn

to a main unit

tsREMOTE

CONTINUE

PROGRAM

MEMO SCAN

PUSH ENTER

TRACK

PLAYER SELECT

BACK

DISC

SKIP

SHUFFLE

REPEAT

TIME/TEXT

Turning off the player’s response to remote

signals

To use the remote supplied with another component

compatible with the 2 way remote system, you must

turn off this player’s response to signals of the remote

supplied with this player.

Set the 2 way remote system to off when:

• you use the remote as RM-TP501, RM-TP501E,

RM-LJ301 supplied with the receiver/amplifier (you

can operate Disc 1 to Disc 200 only).

• you use the remote with the mark supplied with

the receiver/amplifier.

1Press MENU/NO.

2Turning the JOG dial until “2WAY OFF ?” appears

in the display window.

3Press YES.

When you connect the player to CDP-CX260 or CDP-

CX88ES, press OPERATE on the transmitter/receiver

to turn it off, and set the 2 way remote system of the

player to on.

To return to normal setting

After following steps 1 and 2, and “2WAY ON ?” is displayed,

then press YES.

Notes

• When you use the remote to operate more than one unit,

position the units so that each unit can receive the signals of

the remote.

• When you use this player with a receiver/amplifier, turn

the receiver/amplifier on when using this player.

MENU/NO YES JOG

I/ u

+100

Playing CDsGetting Started

7GB

Getting Started

Loading the Disc Memo

1Press MENU.

2Move the cursor (”) to “Set up” by using the Easy

scroll key, then press the Easy scroll key.

2Move the cursor (”) to “Set up” by using the Easy

scroll key, then press the Easy scroll key.

3Move the cursor to “Player check,” then press the

Easy scroll key.

The display shows the disc data in the player after

“Now player checking...” appears.

When you connect another CD player, the disc

data in the second CD player also appears.

How to move the cursor in the remote’s

display

To move the cursor down, push the Easy scroll key

downward as illustrated below.

To move the cursor up, push the Easy scroll key

upward as illustrated below.

Storing disc data in the remote

1Press MENU.

Note the $mark indicates that the menu

continues.

Press the Easy scroll key downward to see the

next items.

(Continued)

Memo sea r ch

Program play

Program input

Group select

CD1

Player check

Memo l oad i ng

Memo r y c l ea r

Contrast adjust

CD1

aster player

= CD1/300discs

CD1

aster player

= CD1/300discs

= CD3/ 51discs

2 player

CD1

Memo sea r ch

Program play

Program input

Group select

CD1

Player check

Memo l oad i ng

Memo r y c l ea r

Contrast adjust

CD1

8GB

Getting Started

3Move the cursor to “Memo loading,” then press

the Easy scroll key.

When you connect another CD player, “2nd

player” also appears.

4When you want to load all Disc Memos (the master

player’s, second CD player’s*, and both player’s

Group Memo data), move the cursor to

“All memo data,” then press the Easy scroll key.

The remote starts reading all memo data. The

loading time may take a few moments. Point the

remote at the player while loading the data.

* The second CD player’s Disc Memo data must be

loaded to the master player before you load the

data to the remote.

Keep the remote 1 – 2 m away from the player while

loading the data.

When you want to load each Disc Memo data

independently, move the cursor to the data you

want to load, then press the Easy scroll key.

5When the remote finishes reading the data,

“Memo loading complete” appears in the remote’s

display.

Adjusting the display contrast of the

remote

1Press MENU.

Turning off the LCD back light

You can conserve the remote’s power by turning off

the LCD (Liquid Crystal Display) back light.

1Press MENU.

2Move the cursor (”) to “Back light mode” by using

the Easy scroll key, then press the Easy scroll key.

3Move the cursor to “OFF,” then press the Easy

scroll key.

Note

If you erase all the data stored in the remote (page 9), follow

the procedure above to turn the back light off again .

2Move the cursor (”) to “Set up” by using the Easy

scroll key, then press the Easy scroll key.

3Move the cursor to “Contrast adjust,” then press

the Easy scroll key.

4Adjust the contrast by pressing the Easy scroll key

up or down and holding until the desired level of

contrast is attained.

5Press the Easy scroll key.

Al l memo data

Master player

Group memo

CD1

ster player

memo LOADING

DI C140

CD1

Memo sea r ch

Program play

Program input

Group select

CD1

Player check

Memo l oad i ng

Memo r y c l ea r

Contrast adjust

CD1

ONTRAST ADJUST

adjus

ctrast t

CD1

Memo sea r ch

Program play

Program input

Group select

CD1

CD Ba c k l i gh t

OFF

CD1

Playing CDsGetting Started

9GB

Getting Started

Erasing all data stored in the remote

1Press MENU.

2Move the cursor (”) to “Set up” by using the Easy

scroll key, then press the Easy scroll key.

3Move the cursor to “Memory clear,” then press the

Easy scroll key.

4If you want to erase all stored data, move the

cursor to “yes,” then press the Easy scroll key.

5“All memory clear!” appears in the display when

all data is erased.

CDP-CX350

CDP-CX230, etc.

To an AC outlet

: Signal flow

To audio input

To LINE OUT

Amplifier

To an AC outlet

COMMAND MODE

To 2ND CD IN

CONTROL A1

To audio output

To CONTROL A1

(Continued)

Connecting Another CD Player

If you have a Sony CD player in which 5, 50, 200, or

300 discs can be inserted and which is equipped with

the CONTROL A1 (or CONTROL A1) jack and the

command mode of that player can be set to CD 3, you

can control that player as the second player with this

unit. After connecting this unit and an amplifier, follow

the procedure below.

Be sure to turn off the power of each player before

making this connection.

Memo sea r ch

Program play

Program input

Group select

CD1

Player check

Memo l oad i ng

Memo r y c l ea r

Contrast adjust

CD1

Al l memory

clear OK?

yes

CD1

Al l memory

clear OK?

yes

CD1

10GB

Getting Started

I/ u

+100

3Turn the JOG dial until you find the disc slot

where you want to insert a disc, while checking the

disc number (written beside every slot and also

indicated in the display).

Disc slot at the loading position

Inserting CDs

You can insert up to 300 discs into this player.

1Press I/uto turn on the player.

2Open the front cover by pressing OPEN/CLOSE.

I/uOPEN/CLOSE JOG

Rotary table

Loading position

Playing position

What cords will I need?

• Audio cord (1) (Use the cord supplied with the player to be

connected.)

• Monaural (2P) mini-plug cord (1) (not supplied)

1Connect the players with an audio cord (see also

“Hookups” on page 5).

2Connect the players with a monaural (2P) mini-

plug cord.

CDP-CX350

For details on this connection, refer to the

supplementary “CONTROL A1 Control System”

instructions.

3Set the COMMAND MODE selector of this player

to CD 1 or CD 2, and set the command mode of the

second player to CD 3.

For details on how to operate the second player,

see “Controlling Another CD Player” on page 27

and “Playing Alternately” on page 29.

4Connect the AC power cord of both players to AC

outlets.

Notes

• Do not connect a player other than that you intend to use as

the second player to the 2ND CD IN jacks of this player.

• When connecting a second CD player, do not connect the

DIGITAL OUT (OPTICAL) connector of this unit to the

amplifier.

• If you connect another CD player after you have already set

up the remote, follow “Setting Up the Remote” on page 6 to

set up the remote again.

• To operate the second CD player with the remote, press

PLAYER SELECT on the remote to select the second player.

CDP-CX230, etc.

CDP-CX350

LINE2ND CD

IN OUT

LINE OUT

COMMAND MODE

132

Disc number

CONTROL A1

CONTROL A1II

I/ u

+100

Andere Handbücher für CDP-CX350 - 300 Disc Cd Changer

Inhaltsverzeichnis

Sprachen:

Andere Sony CD-Player Handbücher

Sony

Sony D-NE518CK ATRAC Guide Bedienungsanleitung

Sony

Sony CDX-52RF Produkthandbuch

Sony

Sony CFD-S22 - Cd Radio Cassette-corder Bedienungsanleitung

Sony

Sony CDX CDX-GT210 Produkthandbuch

Sony

Sony Discman D-240 Bedienungsanleitung

Sony

Sony CDX-L510X - Fm/am Compact Disc Player Produkthandbuch

Sony

Sony SCD-CE595 Bedienungsanleitung

Sony

Sony MZ-NH900 Bedienungsanleitung

Sony

Sony CFD-S20CP - Cd Radio Cassette-corder Bedienungsanleitung

Sony

Sony CDP-3100 Bedienungsanleitung

Sony

Sony Walkman D-FS601 Bedienungsanleitung

Sony

Sony CDX-CA650X - Fm/am Compact Disc Player Bedienungsanleitung

Sony

Sony WALKMAN D-CJ01 Bedienungsanleitung

Sony

Sony CDX-60X - Compact Disc Changer Bedienungsanleitung

Sony

Sony DVP-FX730 - Portable Dvd Player Bedienungsanleitung

Sony

Sony CDX-GT540UI Bedienungsanleitung

Sony

Sony CDX-G3205UV Bedienungsanleitung

Sony

Sony D-EJ109 Operating Instructions (primary... Bedienungsanleitung

Sony

Sony Walkman MZ-RH710 Bedienungsanleitung

Sony

Sony CD Walkman D-FJ041 Bedienungsanleitung

Sony

Sony CDP-XE400 - Compact Disc Player Bedienungsanleitung

Sony

Sony CDX-C5850 - Fm/am Compact Disc Player Produkthandbuch

Sony

Sony CFD CFD-S03CP Bedienungsanleitung

Sony

Sony MZ-M10 Bedienungsanleitung

Beliebte CD-Player Handbücher anderer Marken

RCA

RCA RP-7923 Bedienungsanleitung

Pioneer

Pioneer DEH-P3550MP XM Bedienungsanleitung

Philips

Philips AZ1207 Bedienungsanleitung

Philips

Philips CD582 Bedienungsanleitung

Philips

Philips AZ 6821 Bedienungsanleitung

Lasonic

Lasonic MSU-2020 Bedienungsanleitung

THOMSON

THOMSON RCD150 Bedienungsanleitung

Denon

Denon DCD-1420 Bedienungsanleitung

Panasonic

Panasonic SJ-MR100 Bedienungsanleitung

Onkyo

Onkyo DX-7210 Bedienungsanleitung

Denon

Denon DVM-4800 Bedienungsanleitung

JBL

JBL MR-32 Bedienungsanleitung

RCA

RCA RCD152 Bedienungsanleitung

Technics

Technics SL-PS770A Bedienungsanleitung

Clarion

Clarion compact disc Bedienungsanleitung

Philips

Philips Expanium AZ 1538 Bedienungsanleitung

Rotel

Rotel RCD 975 Bedienungsanleitung

Pioneer

Pioneer CLD-D790 Bedienungsanleitung