Sony PFV-D10 Bedienungsanleitung

DIGITAL INTERFACE UNIT

PFV-D10

INSTALLATION MANUAL

1st Edition

Serial No. 10001 and Higher

!WARNING

This manual is intended for qualified service personnel only.

To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that

contained in the operating instructions unless you are qualified to do so. Refer all servicing to

qualified service personnel.

!WARNUNG

Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.

Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die

Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei

Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben

Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung

dazu besitzen.

!AVERTISSEMENT

Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin

de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les

réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.

Pour toute réparation faire appel à une personne compétente uniquement.

For the U.S.A

Attention-when the product is installed in Rack:

1. Prevention against overloading of branch circuit

When this product is installed in a rack and is

supplied power from an outlet on the rack, please

make sure that the rack does not overload the supply

circuit.

2. Providing protective earth

When this product is installed in a rack and is

supplied power from an outlet on the rack, please

confirm that the outlet is provided with a suitable

protective earth connection.

3. Internal air ambient temperature of the rack

When this product is installed in a rack, please make

sure that the internal air ambient temperature of the

rack is within the specified limit of this product.

4. Prevention against achieving hazardous

condition due to uneven mechanical loading

When this product is installed in a rack, please make

sure that the rack does not achieve hazardous

condition due to uneven mechanical loading.

1(E)

PFV-D10

Table of Contents

Manual Structure

Purpose of this manual ......................................................................................... 3(E)

Contents ................................................................................................................ 3(E)

Related manuals.................................................................................................... 4(E)

1. Installation

1-1. Installation Procedure ............................................................................. 1-1(E)

1-2. Operating Environment .......................................................................... 1-1(E)

1-3. Power Supply ......................................................................................... 1-1(E)

1-3-1. Power Supply Specifications ................................................. 1-1(E)

1-3-2. Recommended Power Cord ................................................... 1-1(E)

1-4. Installation Space ................................................................................... 1-2(E)

1-5. Installing Optional Board .......................................................................1-3(E)

1-6. Rack Mounting ....................................................................................... 1-5(E)

1-7. Optional Accessories .............................................................................. 1-6(E)

3(E)

PFV-D10

Purpose of this manual

This manual is the installation manual of Digital Interface Unit PFV-D10.

This manual is intended for use by trained system and service engineers, and

describes the information for installation of the unit.

Contents

This manual is organized by following sections.

Section 1 Installation

1-1. Installation Procedure

Explains the installation procedure with a flowchart.

1-2. Operating Environment

Describes the operating environment such as operating temperature/humidity,

and mass of the unit.

1-3. Power Supply

Describes the power supply, recommended power cord, and the notes for power

supply.

1-4. Installation Space

Describes the dimensions of the unit.

1-5. Installing Optional Board

Explains the installation procedure of the optional board.

1-6. Rack Mounting

Explains the rack mounting procedure of the unit in the 19-inch standard rack.

1-7. Optional Accessories

Describes the optional boards and rack mounting kit.

Manual Structure

4(E) PFV-D10

Related manuals

The following manuals are prepared for the PFV-D10.

• Operation Manual (Supplied with PFV-D10)

This manual describes the notes on operating, the locations and functions of parts,

and controls of the PFV-D10.

• Maintenance Manual (Available on request)

This manual describes the information for periodic maintenance and detailed

service.

For obtaining the maintenance manual, please contact to your local Sony’s sales

representative or service center.

1-1(E)

PFV-D10

Section 1

Installation

End

Start

Determining the Location of Installation

1-2. Operating Environment

1-3. Power Supply

1-4. Installation Space

Installing the Optional Board

1-5. Installing Optional Board

1-6. Rack Mounting

Connection

Rack Mounting

AC Inlet

(Main unit)

AC Inlet

(Main unit)

1-3. Power Supply

1-3-1. Power Supply Specifications

Power voltage AC 100 V to 240 V

Power frequency 50/60 Hz

Power consumption AC 100 to 120 V : Max. 0.8 A

AC 220 to 240 V : Max. 0.4 A

(With the optional board installed.)

Rush current AC 120 V IN : 28.8 A

AC 240 V IN : 61.6 A

1-3-2. Recommended Power Cord

For customers in the U.S.A. and Canada

Required Part

1Power cord, 125 V 10 A (2.4 m) : 1-557-377-11

For customers in the United Kingdom

Required Part

2Power cord, 250 V 10 A (2.5 m) : 1-590-910-11

For the customers outside of the area as shown above,

please consult with local Sony’s sales representative or

service center.

.Use the specified power cord only.

Be sure to use the recommended power cord to avoid fire

and/or an electric shock.

.Ground the unit for your safety.

Be sure to attach a ground wire to avoid an electric

shock.

1-1. Installation Procedure

The installation procedure of the PFV-D10 is shown in the

following flowchart.

Refer to the each item in this manual for details.

1-2. Operating Environment

Operating temperature +5 dC to +40 dC

Performance temperature +5 dC to +40 dC

Humidity 10 to 90 % (No condensation)

Mass Approx. 6 kg

(Not including the optional board.)

To prevent overheating of the PFV-D10 ensure that there is

good air circulation around the unit.

1-2(E) PFV-D10

43.6(1U)

31.8

482

465

424

425.5 11.

123.8

263.5

21.5

Unit : mm

1-4. Installation Space

Do not block the ventilation holes of the unit.

Place the unit at least 20 cm away from the walls for ventilation and maintenance.

The outer dimensions of the PFV-D10 are as shown in the figure below.

1-4. Installation Space

1-3(E)

PFV-D10

1-5. Installing Optional Board

Turn off the power and unplug the power plug from the

outlet before installing or removing the board.

Front side

1. Remove the two screws, then remove the front panel.

2. Remove the screw, then remove the board retainer.

3. Insert the optional board along the board guide rails.

4. Push the optional board with the board levers turned in

the direction of the arrow 1until it connects to a

motherboard of the unit securely.

5. Install the board retainer.

6. Install the front panel.

When removing the optional board, turn the board levers in

the direction of the arrow 2, then pull out the board

toward you.

Board retainer

PSW

3x6

Screws

Front panel

Optional board

Board guide rail

Component side

Insert

Remove

Board lever Board lever

1-5. Installing Optional Board

1-4(E) PFV-D10

Connector cover

B 3x6

Connector panel

B 3x6

Rear side

1. Remove the two screws, then remove the connector

cover on the rear side.

2. Insert the optional connector panel.

3. Secure the connector panel with the two screws

securing the connector cover.

Attach the connector cover to a dead solt. Opening the slot

may cause an electric shock and cannot realize an air-

cooled effect of the unit.

1-5. Installing Optional Board

Andere Handbücher für PFV-D10

Inhaltsverzeichnis

Andere Sony Aufnahmegeräte Handbücher

Sony

Sony DPS-R7 Bedienungsanleitung

Sony

Sony BDX-N1000 Bedienungsanleitung

Sony

Sony RCD-W10 - Cd/cdr Recorder/player Bedienungsanleitung

Sony

Sony BZDM-7020 Bedienungsanleitung

Sony

Sony HVR-M15E Bedienungsanleitung

Sony

Sony RCD-W100 Bedienungsanleitung

Sony

Sony Walkman PCM-M1 Bedienungsanleitung

Sony

Sony PFV-L02 Bedienungsanleitung

Sony

Sony SRW5800/2 Bedienungsanleitung

Sony

Sony HAR-LH500 Bedienungsanleitung

Sony

Sony SB-V66S Bedienungsanleitung

Sony

Sony RCD-W1 Operating Instructions (primary... Bedienungsanleitung

Sony

Sony BKM-103 Bedienungsanleitung

Sony

Sony XDCAM PMW-1000 Bedienungsanleitung

Sony

Sony CDR-W33 Bedienungsanleitung

Sony

Sony SVR-HDT1000 Bedienungsanleitung

Sony

Sony DMX-R100 Bedienungsanleitung

Sony

Sony CCD-FX73OV Bedienungsanleitung

Sony

Sony SRW-1 Bedienungsanleitung

Sony

Sony XDS1000 Bedienungsanleitung

Sony

Sony DPS-V77 Bedienungsanleitung

Sony

Sony IFB-12A Bedienungsanleitung

Sony

Sony XE-90 MkII Bedienungsanleitung

Sony

Sony IFB-40 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch