Sony O.S.D. WDR Series Bedienungsanleitung

SERVICE MANUAL

1/3” SONY DSP COLOR CCD CAMERA

O.S.D. WDR SERIES

V.48_W_M

The serial number of this product may be found

on the bottom of the unit.

You should note the serial number of this unit in

the space provided and retain this instruction as a

permanent record of your purchase to aid

identification in the event of theft.

Model No.

Serial No.

▲Before attempting to connect this product, please read and keep this

manual for future use.

Safety Warning

1. Do not open the cover, it may cause electric shock.

Ask a qualified service person for maintenance when you encounter any

problems.

2. Install the camera away from TV, radio transmitter, magnet, electric

motor, transformer, audio speakers because the magnetic fields

generated from above devices will distort the video image.

3. Place this camera on a solid base. Install the camera away from

stoves or other heat generating devices as the high temperature could

cause deformation, discoloration or other damages to the camera.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is interned to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

①

Install the camera at where the temperature range does not exceed 0°C

to 50°C (32°F to 122°F)

4. Do not expose and operate the camera in the rain and humid areas.

5. Use only soft dry cloth to clean the camera. Also use lens tissue or

cotton tipped applicator and ethanol to clean the CCD sensor and

camera lens.

6. When the camera is not in use, put the cover cap on the lens mount.

Please do not touch the surface of CCD by bare hand.

Introduction

This OSD series CCD camera introduces a new level of high picture quality

through the digital signal processing LSI’s technology for advanced video

surveillance. It provides the most reliable and accurate color picture in

security industries.

Main Features

Color camera with SONY 1/3” Super HAD CCD sensor in metal case.

Employs Digital Signal Processor (DSP) chip-set for image control.

Controlled by OSD (On Screen Display) menu.

Programmable GAMMA processing.

Color rolling suppress, breathing suppress.

3D-NR (3D Noise Reduction), digital WDR (Wide Dynamic Range).

Digital zoom, motion detection, mirror, privacy mask, 256X sens-up.

High sensitivity CCD enables a clear image even in 0.01Lux.

Video / DC drive lens can be selected. Supports both C / CS mount lens.

Support Line Lock external synchronization (AC only).

②

Parts Names & Components

Hex Screwdriver

Auto Iris Plug

C-Mount Ring

Manual

Power LED Selection & setting buttons

Hole to fix lens

Auto iris connector

③

Auto Iris Function

DC DRIVE VIDEO DRIVE

Pin 1 (Red) Drive - Volt +

Pin 2 (N.C) Drive + N.C

Pin 3 (White) Damp + IRIS

Pin 4 (Black) Damp - GND

④

Plug in auto iris

connector

Screw the auto iris

lens on CS mount

Installation Instructions

(1) Remove the cap from the lens mount.

(2) Select the C mount lens (with mount ring) or CS mount lens.

(3) Screw and fasten the lens into the lens mount.

(4) Connect the video output wire between monitor and camera through

75ohm type coaxial cable.

(5) Connect the power cord input.

(6) When monitor shows the picture, please adjust the focus and iris of the

lens to obtain the best image according to the following procedures:

‧ Choose objects at a distance about 5 ~ 10 meter away.

‧ Loosen the mount lens fixing screw (use L wrench), if necessary.

‧ Turn the lens and the mount together until image is clear.

‧ Screw the mount to camera.

(7) Fix camera to the bracket, if necessary.

⑤

Switch Definition

SET button

Press to display the menu. In the menu, this button functions as “ENTER”.

UP & DOWN buttons

Press to select the item of menu.

LEFT & RIGHT buttons

Press to change the item value.

Menu Operation

MAIN MENU

‧ Press the SET button to display the menu on screen.

‧ Press the UP or DOWN button to select the item.

‧ The selected item will be displayed in yellow text.

‧ Press the LEFT or RIGHT button to change mode.

‧ The ENTER symbol means there is a sub-menu. Press the SET button to enter

to the sub-menu.

‧ Select the EXIT item and press the SET button to finish setting.

DOWN

button

LEFT SET RIGHT

button button button

UP button

⑥

LENS

To select the lens mode depending on the lens used:

‧ MANUAL When manual iris lens is used.

‧ DC When auto iris lens that requires a DC drive signal is used.

BRIGHTNESS (0~100) adjustable.

‧ VIDEO When auto iris lens that requires a video drive signal is used.

EXPOSURE

SHUTTER

To change the shutter setting and speed based on the environment.

‧ AUTO After an immobile brightness value is set, the shutter speed

will adjust automatically to achieve the value.

‧ FLK Select when flickering occurs on the screen due to an

Imbalance between illumination and frequency. Under this

mode, the shutter speed is NTSC: 1/100; PAL: 1/120.

‧ FIXED 1/60 (for NTSC) or 1/50 (for PAL); 1/250;1/500;1/2,000;

1/5,000;1/10,000; 1/100,000;X256;X128;X64;X32;X16;

X8;X4;X2 adjustable.

BRIGHTNESS

Value 0~100 adjustable.

AGC (Auto Gain Control)

Enable this function to heighten the brightness signal automatically.

‧ ON LOW; MIDDLE;HIGH adjustable.

‧ OFF To disable this function.

SENS-UP (Sensitivity-Up)

Digital low shutter enables to capture a color

image at low light environment.

‧ AUTO X2;X4;X8;X16;X32;

X64;X128;X256.

‧ OFF To disable this function.

BLC (Backlight Compensation)

When there is strong backlight behind the

object, enable this function to achieve a clear

image of the background as well as the object.

64 zone scales adjustable.

‧ BLC GAIN: LOW; MIDDLE;

HIGH adjustable.

‧ HSBLC Hightlight suppress BLC.

‧ OFF To disable this function.

⑦

D-WDR (Digital Wide Dynamic Range)

When there is a very strong backlight behind the object, more than the AGC

function can handle, enable this function to achieve a clear image of the

background as well as the object.

‧ ON INDOOR;OUTDOOR adjustable.

‧ OFF To disable this function.

WHITE BAL (White Balance)

‧ ATW Auto Tracking White Balance. The white balance will adjust

continually according to the color temperature of the object. The

range of color temperature is 1,800°K~10,500°K.

‧ AWB Auto White Balance. The white is correct in any condition. (To

adjust the white balance, focus the camera to white paper and

press SET button to obtain the optimum state under current

illumination. If the environment including the light source is

changed, the white balance has to be adjusted again).

‧ AWC Auto White Balance Control.

‧ MANUAL The manual adjustment mode enables finer adjustment ofATW

and AWB. Please select ATW mode or AWB mode first and

change to MANUAL mode. Set the appropriate color

temperature and then increase or decrease the RED (0~100) and

BLUE (0~100) color values while monitoring the color changes

on the object.

‧ MODE INDOOR;OUTDOOR adjustable.

DAY NIGHT

‧ COLOR Common mode.

‧ AUTO Automatically changes between color mode under bright light

environment and B/W mode under low light environment. Set

the value of DELAY (0~63); S-LEVEL (START LEVEL 0~100);

E-LEVEL (END LEVEL 0~100) to define the changing time.

‧ B/W Stay in B/W mode for clear and the better visibility image under

low light environment. BURST (ON/OFF) adjustable.

<<ATTENTION>> This function works with AGC.

3DNR (3D Noise Reduction)

Enable this function to reduce the noise at low light environment. This function

enables the camera to use a higher AGC level to electronically enhance the sensitivity

of the camera in low light environment (higher AGC, more noise)

‧ ON LEVEL (0~100) adjustable.

‧ OFF To disable this function.

ADJUST

Adjust SHAPRNESS (0~31); BLUE; RED for clearer and more colorful image.

⑧

SPECIAL MENU

CAM TITLE (Camera Title)

D-EFFECT

FREEZE Enable this function to hold a still image.

MIRROR OFF; MIRROR; V-FLIP; ROTATE adjustable.

D-ZOOM (Digital Zoom)

⑨

MIRROR OFF

H-MIRROR ON

V-MIRROR ON

ROTATE ON

Inhaltsverzeichnis

Andere Sony Sicherheitskamera Handbücher

Sony

Sony SNC-RS44N Bedienungsanleitung

Sony

Sony NSR-500 Handbuch

Sony

Sony Ipela SNC-WR630 Bedienungsanleitung

Sony

Sony FCB-EV7517 Bedienungsanleitung

Sony

Sony Ipela SNC-EP580 Bedienungsanleitung

Sony

Sony Ipela SNC-CH135 Bedienungsanleitung

Sony

Sony Super HAD CCD SSC-CD73V Installations- und Betriebshandbuch

Sony

Sony SNC-VB770 Bedienungsanleitung

Sony

Sony SNC-CH115 Bedienungsanleitung

Sony

Sony IPELA SNC-VM772R Bedienungsanleitung

Sony

Sony Hyper HAD SPT-M124 Bedienungsanleitung

Sony

Sony ExwaveHAD DXC-990 Bedienungsanleitung

Sony

Sony IPELA SNC-RZ30N Bedienungsanleitung

Sony

Sony SST-6420 Bedienungsanleitung

Sony

Sony SNC-RZ25N - Network Camera Bedienungsanleitung

Sony

Sony IPELA SNC-CH110 Bedienungsanleitung

Sony

Sony DynaView SSC-DC573 Installations- und Betriebshandbuch

Sony

Sony MPEG4 LAN Camera Bedienungsanleitung

Sony

Sony IPELA SNC-VM772R Bedienungsanleitung

Sony

Sony Ipela SNC-ZR550 Bedienungsanleitung

Sony

Sony Ipela SNC-EB602R Bedienungsanleitung

Sony

Sony SNC-DH280 Bedienungsanleitung

Sony

Sony SNC-CH115 Bedienungsanleitung

Sony

Sony IPELA SNC-RZ30N Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung