Sony URX-M2 Bedienungsanleitung

4-567-049-01 (1)

Diversity Tuner

Module

Operating Instructions

Before operating the unit, please read this manual thoroughly

and retain it for future reference.

URX-M2

2Table of Contents

Table of Contents

Configuration of the Packages ..... 3

Features .......................................... 3

Parts Identification ........................ 4

Power Supply ................................. 5

Attachment and Installation

Procedures ...................................... 5

Installing a diversity tuner module

(URX-M2) ............................... 5

Operation ....................................... 7

If noise is heard ....................... 7

Tuner Settings ................................ 8

Setting the reception

channel ..................................... 8

Selecting the channels on multiple

tuners automatically ................ 9

Transmitter Settings ................... 10

System Configurations................ 12

Error Messages............................ 14

Troubleshooting........................... 15

Important Notes on Use .............. 17

On usage and storage ............. 17

On cleaning ............................ 17

Specifications ............................... 18

Configuration of the Packages / Features

Configuration of

the Packages

This manual is intended specifically for the

URX-M2 tuner.

When using the tuner in conjunction with

the UTX-M03 transmitter, be sure to read

the configuration instructions found in the

operating instructions for the UWP-D series

together with this manual.

Features

This tuner (diversity tuner module

(URX-M2)) is a tuner module that can be

incorporated into an MB-X6 Tuner Base

Unit, SRP-X500P Powered Mixer, or

similar device.

The combination of the diversity tuner

module (URX-M2) and a transmitter (not

supplied) used in conjunction with a

powered mixer, for example, allows use in

AV (audio visual) presentations and small-

scale PA (public address) systems.

The unit is not compatible with WRT series

transmitters.

Note

Diversity tuner module (URX-M2) (1)

Operating Instructions (1)

CD-ROM (1)

Warranty card (1)

(for U30 and U42 models)

Supplied accessories Note

4Parts Identification

Parts

Identification

aSET button

Press to change and enter display

parameters.

For details, see “Tuner Settings” on page 8.

bRF (radio frequency) indicator

The color indicates the strength of the RF

input signal.

On (green): RF input is 25 dBµ1) or more.

Off: RF input is less than 25 dBµ1).

1) 0 dBµ = 1 µVEMF

cDisplay section

ARF (radio frequency) indications

The number of dots indicates the RF input

level.

BAF (audio frequency) indication

Appears whenever the output audio signal

is stronger than the reference level.

CGP (group)/CH (channel) indication

Shows the reception channel group and

channel number. Each time you press the

SET button, the channel indication changes

as follows.

For details, see“Tuner Settings” on page 8.

d+ (+ selection) / – (– selection/reset)

buttons

Press these buttons to set the reception

channel and frequency.

The channel indication (C) for

U30 model is shown.

Reception

channel group

and number

Reception

frequency

The channel/frequency indications for

U30 model are shown.

Press

the

SET

button.

Power Supply / Attachment and Installation Procedures

Power Supply

When incorporated into another component

(e.g., MB-X6, SRP-X500P, etc.), the tuner

module draws its power from that

component.

For details on the power supply to the diversity tuner

module, refer to the operating instructions of the

component in which the diversity tuner module is

installed.

Attachment and

Installation

Procedures

This section describes how to install the

diversity tuner module onto an MB-X6

Tuner Base Unit or SRP-X500P Powered

Mixer.

Installing a diversity tuner

module (URX-M2)

• Before installing the diversity tuner

module (URX-M2), make sure the unit

into which the tuner module will be

installed is turned off. Do not install or

uninstall the tuner module while the unit

into which the tuner module will be

installed is turned on, as this may result in

malfunction of the tuner module or cause

noise.

• Do not put your fingers on the connectors

on the rear panel of the tuner module or

into the slot on the unit into which the

tuner module will be installed.

• Keep the tuner module away from static

electricity.

Notes

6Attachment and Installation Procedures

To install a diversity tuner

module (URX-M2) into the

optional MB-X6 Tuner Base

Unit

The MB-X6 Tuner Base Unit (not supplied)

can accommodate up to 6 diversity tuner

modules (URX-M2).

For details on installation procedure, refer to the

Operating Instructions supplied with the MB-X6.

Hold the tuner module by the side and insert

it into the slot until you hear a click.

To install two or more tuner

modules

Before installing the tuner modules, detach

the necessary number of blank panels from

the front cover of the MB-X6.

To uninstall a tuner module

After removing the front cover of the

MB-X6, hold the tuner unit by the top and

bottom, then pull it out of the slot.

To install a diversity tuner

module (URX-M2) into the

optional SRP-X500P Powered

Mixer

The SRP-X500P Powered Mixer (not

supplied) can accommodate up to two

diversity tuner modules (URX-M2).

For details on installation procedure, refer to the

Operating Instructions supplied with the

SRP-X500P.

Remove the protection panel (large) from

the SRP-X500P. Inspect the top and bottom

sides of the diversity tuner module and

insert it into the slot.

To uninstall the tuner module

Pull the latch securing the tuner module to

the side and pull out the tuner module.

Latch

Operation

1Make all necessary connections on the

tuner.

For examples of connections, see “System

Configurations” on page 12.

2Turn on the tuner.

The parameters that were in the display

section when the tuner was last turned

off appear again.

Noise will be produced when the tuner

is turned on. Before turning on the

tuner, turn down the volume of the

equipment connected to the tuner.

3Set the reception channel on the tuner.

Switch the channel on the tuner with

the transmitter turned off and select the

channel where the RF indicator does

not turn on.

For details on setting the reception channel,

see “Setting the reception channel” on page 8.

4Set the transmission channel on the

transmitter, and then turn off the unit.

For details on setting the transmission

channel, refer to the operating instructions for

the transmitter.

5Turn on the transmitter.

If noise is heard

Depending on the environment where the

unit is installed, external noise or radio

waves may disrupt transmission on certain

channels.

When selecting a channel under these

circumstances, turn off the transmitter.

Then, on the tuner, select a channel for

which the RF indicator does not light up

(i.e., a channel free from noise or radio

wave interference). Set the same channel on

the transmitter.

To prevent interference or noise, please

take the following precautions.

• Do not use two or more transmitters with

the same wireless channels.

• When operating two or more UWP series

packages simultaneously, set each

package to a different channel within the

same channel group.

• Keep the reception antenna and the

transmitter separated more than 3 meters

(9 feet 11 inches).

• When operating two or more UWP series

packages simultaneously with different

channel groups, make sure that they are at

least 100 meters (330 feet) apart, if they

are used within clear sight of each other.

(The actual distance may differ

depending on the circumstances.)

Note

8Tuner Settings

Tuner Settings

Setting the reception

channel

Refer to the pdf files “Sony Wireless Microphone

System Frequency List” on the supplied CD-ROM

for details on the selectable channel groups and

channels.

1Press down the SET button for more

than one second.

Keep pressing the SET button until the

display section parameters start to

flash.

2Press the SET button repeatedly until

the channel group and the channel

number indications appear.

The channel group indication starts to

flash.

3Press the + or – button to select the

channel group.

Pressing the + button cycles the

indication in the order shown in the

tables in the pdf files “Sony Wireless

Microphone System Frequency List”

on the supplied CD-ROM.

Pressing the – button cycles the

indications in the opposite direction.

Hold down the + or – button to change

the channel group faster.

4When the desired channel group

number appears, press the SET button.

The selected group is entered.

The right four digits start to flash to

allow the selection of the channel

number.

5Press the + or – button to select the

channel number.

The channel indication changes in the

order shown in the tables in the pdf

files “Sony Wireless Microphone

System Frequency List” on the

supplied CD-ROM.

6When the desired channel number

appears, leave the tuner for about 10

seconds or press down the SET button

for more than one second.

The selected channel number stops

flashing and the selection is stored in

memory.

Example: When the channel group 00 is

selected

Tuner Settings

To select the channel by

frequency indication

1Press the SET button for more than one

second.

Keep pressing the SET button until the

display section parameters start to

flash.

2Press the SET button repeatedly until

the frequency indication appears and

starts flashing.

3Press the + or – button to select the

frequency.

4When the desired frequency appears,

leave the tuner for about 10 seconds or

press down the SET button for more

than one second.

The selected channel number stops

flashing and the selection is stored in

memory.

• Even when you are setting the reception

channel, the tuner can be used to receive

signals.

• Do not remove the batteries while setting

the reception channel. If they are

inadvertently removed, re-insert them

immediately and redo the procedure

“Setting the reception channel” from

step 1.

• Make sure that the selected channel is the

same on the transmitter and tuner being

used in the same system.

• If you turn off the tuner and then

immediately turn it on right after setting

the reception channel, the unit may not

operate normally. Wait a few seconds

before turning it on again.

Selecting the channels on

multiple tuners

automatically

When multiple diversity tuner modules

(URX-M2) are installed into the MB-X6 to

perform simultaneous multiple-channel

operation, select the channel group on the

tuner module installed into the slot 1of

the MB-X6, then all the tuner modules

installed into the MB-X6 can be set to

different channels within the selected

channel group.

1Turn off all the microphones and

transmitters.

2Select the channel group on the tuner

module installed into the slot 1of the

MB-X6.

3After confirming that the channel

group indication has stopped flashing

(about 10 seconds after you have

selected the channel group), keep

pressing the + button on the tuner

module installed into the slot 1of the

MB-X6.

All the tuner modules installed into the

MB-X6 are set to the available

channels within the selected channel

group.

After the automatic detection and

selection of available channels finish,

you can change the group and channel

on each tuner module manually.

Notes

10 Transmitter Settings

• Do the automatic detection and selection

of available channels with the channel

group other than channel group 00.

• When there are unavailable channels due

to extraneous radio wave and the channel

could not be selected on some tuner

modules, “NO CH” appears on the

display of those tuner modules. If this

happens, select the channel group with no

interference from extraneous radio wave,

and repeat the procedure above.

Transmitter

Settings

When using the URX-M2 in conjunction

with the UTX-M03, be sure to configure the

settings on the UTX-M03.

For details on the channel groups and channels that

can be used during use with this unit, refer to the

Frequency List on the CD-ROM supplied with the

unit.

Selecting the frequency band

(BAND) (CE38 models only)

1Press and hold the SET button, and

press the POWER/MUTING button to

turn the power on.

2Use the + or – button to display

BAND.

3Press and hold the SET button for

1 second or longer.

4Use the + or – button to select the

transmission frequency band.

5Press the SET button to confirm the

setting.

Notes

Inhaltsverzeichnis

Andere Sony Tuner Handbücher

Sony

Sony ST-S444ES Bedienungsanleitung

Sony

Sony WRU-806B Bedienungsanleitung

Sony

Sony HCD-WZ5 Bedienungsanleitung

Sony

Sony XT-100HD Bedienungsanleitung

Sony

Sony WRR-801A Bedienungsanleitung

Sony

Sony WRR-810A Bedienungsanleitung

Sony

Sony ST-D50L Bedienungsanleitung

Sony

Sony WRR-850A Bedienungsanleitung

Sony

Sony ST-JX311 Bedienungsanleitung

Sony

Sony ST-S500ES Bedienungsanleitung

Sony

Sony WRR-800A Bedienungsanleitung

Sony

Sony WRR-810A Bedienungsanleitung

Sony

Sony WRR-861A Bedienungsanleitung

Sony

Sony WRU-801A Bedienungsanleitung

Sony

Sony XDRF1HD - HD Radio Tuner Bedienungsanleitung

Sony

Sony ST-JX410 - Fm/am Tuner Bedienungsanleitung

Sony

Sony URX-S03D Bedienungsanleitung

Sony

Sony STR-NX1 Bedienungsanleitung

Sony

Sony FD-525 Bedienungsanleitung

Sony

Sony MB-8N Bedienungsanleitung

Sony

Sony ST-D777ES Bedienungsanleitung

Sony

Sony WRR-855A Bedienungsanleitung

Sony

Sony ST-S590ES Bedienungsanleitung

Sony

Sony ST-SA5ES Bedienungsanleitung

Beliebte Tuner Handbücher anderer Marken

Tunersys

Tunersys WS16 1 Bedienungsanleitung

Arcam

Arcam DT91 Bedienungsanleitung

Magnum

Magnum MD 102T Bedienungsanleitung

HDHomeRun

HDHomeRun 20121008 Bedienungsanleitung

Crestron

Crestron C2N-TXM Bedienungsanleitung

Eico

Eico HFT-92 Bedienungsanleitung

MFJ

MFJ MFJ-928 Bedienungsanleitung

NAD

NAD C 445 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SC-FM1 Bedienungsanleitung

Antique Automobile Radio

Antique Automobile Radio 283501B Bedienungsanleitung

Monacor

Monacor PA-1200R Bedienungsanleitung

Technics

Technics ST-X301L Bedienungsanleitung

Manhattan

Manhattan 176156 Bedienungsanleitung

Marantz

Marantz ST-15S1 Bedienungsanleitung

Korg

Korg HA-40 Bedienungsanleitung

Harman Kardon

Harman Kardon TU915 Bedienungsanleitung

Teac

Teac T-1D Bedienungsanleitung

Pioneer

Pioneer GEX-P700DAB Bedienungsanleitung