Sony WRR-862A Bedienungsanleitung

3-205-401-13 (1)

WRR-862A/WRR-862B

UHF Synthesized

Dual Diversity Tuner

2000 Sony Corporation

Operating Instructions

Mode d'emploi

Bedienungsanleitung

Manual de instrucciones

Declaration of Conformity

Trade Name: SONY

Model No.: WRR-862B

Responsible Party: Sony Electronics Inc.

Address: 1 Sony Drive, Park Ridge,

NJ.07656 U.S.A.

Telephone No.: 201-930-6972

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

Owner’s Record

The model and serial numbers are located at the rear of the

unit. Record the serial number in the space provided below.

Refer to these numbers whenever you call upon your Sony

dealer regarding this product.

Model No. WRR-862A/862B Serial No.

Notice for customers in the U.S.A.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

If you have any questions about this product, you

may call:

Sony's Business Information Center (BIC)

at 1-800-686-SONY (7669)

or Write to:

Sony Customer Information Services Center

6900-29 Daniels Parkway, PMB 330 Fort Myers,

Florida 33912

III

Notice for customers in Canada:

Use of Sony wireless devices is regulated by the Industry

Canada as described in their Radio Standard Specification

RSS-123.

A licence is normally required. The local district office of

Industry Canada should therefore be contacted. When the

operation of the device is within the broadcast band, the

licence is issued on no-interference, no-protection basis with

respect to broadcast signals.

Operation of this device is subject to the following two

conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including

interference that may cause undesired operation of the

device.

Avis pour les clients au Canada:

L’usage des appareils sans-fil Sony est réglé par l’Industrie

Canada comme décrit dans leur Cahier des Normes

Radioélectriques CNR-123.

Une licence est normalement requise. Le bureau de

l’Industrie Canada doit être contacté. Lorsque l’opération de

l’appareil est dans les limites de la bande de radiodiffusion,

la licence est émanée sur la base de non-interférence, non-

protection avec les signaux de radiodiffusion.

L’utilisation de cet appareil est soumise aux deux conditions

suivantes : (1) cet appareil ne peut causer d’interférences, et

(2) cet appareil doit accepter toutes les interférences, y

compris les interférences capables de provoquer un

fonctionnement indésirable de l’appareil.

Notice for customers in Europe

Spécifications particulières pour les consommateurs européens

Hinweis für Kunden in Europa

Aviso para los usuarios en Europa

U.K. 854.125 - 862 MHz

Germany 798 - 822 MHz

Norway 800 - 820 MHz

Luxembourg 800 - 830 MHz, 854.125 - 862 MHz

Belgium 854.125 - 862 MHz

Denmark 800.100 - 819.900 MHz

France 470 - 830 MHz

Italy 800 - 820 MHz

Sweden 800 - 820 MHz

Switzerland 800 - 820 MHz

Finland 800 - 814 MHz

Iceland 800 - 814 MHz

Austria 774 - 790 MHz

Netherland 774 - 782 MHz

Hereby, Sony Corporation, declares that this WRR-862B is

in compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

Sony Corporation déclare par la présente que ce WRR-862B

est conforme aux exigences fondamentales et aux autres

dispositions applicables de la Directive 1999/5/CE.

Hiermit erklärt die Sony Corporation, daß das Modell

WRR-862B die grundlegenden Anforderungen und sonstigen

relevanten Bestimmungen der Richtlinie 1999/5/EU erfüllt.

Por la presente, Sony Corporation, declara que este

WRR-862B cumple con los requisitos esenciales y otras

disposiciones pertinentes de la Directiva 1999/5/CE.

(GB)

Precautions

English Table of Contents

•The unit is designed for use in ambient temperature range

of 0°C to 50°C (32°F to 122°F).

•Do not place the unit on or near heat sources, such as

lighting equipment, power amplifiers, or in a place subject

to direct sunlight or excessive moisture. In such places,

the external finish or internal parts of the unit may be

damaged.

•If the unit is used in a very humid or dusty place or in a

place subject to an active or corrosive gas, clean its

surface as well as the connectors with a dry, soft cloth

soon after use.

Lengthy use of the unit in such places or not cleaning it

after its use in such places may shorten its life.

•When cleaning the unit, never use organic solvents such

as thinners or benzine, which will damage the finish of the

unit.

•The unit has been factory adjusted precisely. Do not

tamper with its internal parts or attempt to repair it.

English

Precautions ......................................................................... 1

Overview............................................................................. 2

Features .......................................................................... 2

Parts Identification ............................................................ 3

Power Supply ..................................................................... 6

Settings................................................................................ 7

Wireless Channel Selection ........................................... 7

Setting the Squelch Level ............................................ 10

Resetting the Accumulated Time Indication ............... 11

Selecting the Backlight Mode...................................... 12

Error Messages ................................................................ 12

Specifications.................................................................... 13

Appendix .......................................................................... 15

Connections ................................................................. 15

Attaching to a Camcorder ............................................ 15

2(GB)

WRR-862A

Model available in Australia: 792 to 806 MHz, TV channels 66 to 67

WRR-862B

Model available in USA: 470 to 806 MHz, TV channels 14 to 69 (14

frequency band, divided into 24 MHz range. All 14 frequency bands

may not be available in some areas.)

Model available in Europe: 470 to 862 MHz, TV channels 21 to 69 (17

frequency band, divided into 24 MHz range. All 17 frequency bands

may not be available in some areas.)

Compact, lightweight and easy to mount on Sony

camcorders

The WRR-862A/862B is extremely compact and

lightweight, housing in the rugged, die-cast magnesium

case. It is easily mounted on Sony camcorders.

Preprogrammed wireless channel plans for simultaneous

multi channel operation

The WRR-862A/862B has many preprogrammed channel

groups, meaning combination of wireless channels to permit

simultaneous operation of multiple channels without

intermodulation.

See “Wireless Microphone System Frequency List” supplied

with this manual.

Extensive information by the LEDs and LCD display

The LEDs indicate each channel RF input level (green/ red

indication), diversity reception status, and transmitter

battery alarm. The LCD display for each tuner indicates the

Overview

The WRR-862A/862B is a highly reliable diversity tuner for

the Sony UHF wireless microphone system to be used for

broadcast or movie production purposes.

This tuner is suitable for Electronic News Gathering (ENG)

and Electronic Field Production (EFP).

The microphone/transmitter and tuners of the wireless

microphone system are classified by frequency band.

In building a UHF wireless microphone system, be sure to

combine a microphone/transmitter and a tuner having the

same wireless channel (frequency).

Features

Dual Diversity Tuner

Despite of its compact design, the WRR-862A/862B

simultaneously receives two signal channels. A space

diversity system is employed on both channels to eliminate

signal dropout and provide stable reception. Two SMC9-4S

(Sony 4 pin) audio output connectors are provided on the

top panel.

Wide Operating Frequency ranges

The WRR-862A operates over a 14 MHz frequency band

within the range of 792 MHz to 806 MHz (model available

in Australia) , while the WRR-862B operates over a 24 MHz

frequency band between 470 MHz to 806 MHz (model

available in U.S.A.), or 470 MHz to 862 MHz (model

available in Europe).

(GB)

Parts Identification

operating channel/frequency, AF output level, RF input

level, battery status of the tuner, and the accumulated

operating time.

Long operating time

Approximate five hours of continuous operation is provided

by using four LR6 (size AA) alkaline batteries. The WRR-

862A/862B can also be operated on the external power from

Sony camcorders via the supplied DC cable.

Switchable RF squelch

The RF squelch can be easily turned ON or off with the

panel button. The RF squelch level is selectable from 5 dBµ,

10 dBµ and 15 dBµ.

Output monitoring

Monitoring of the tuner 1, the tuner 2, or mixed 1 and 2

output is selectable. The monitor volume is adjustable with

a knob.

Overview

qg DC 12V IN connector

1ANT a/b connectors

2OUTPUT 1/2 (BAL)

connectors

3MONITOR connector

4RF indicators

5TX BATT indicators

8SQUELCH switch

7MONITOR volume

6MONITOR switch

9Display section

qd CONTROL switch

qs MODE button

qa SET button

0+/–buttons

qf POWER switch

Battery holder

4(GB)

Parts Identification

the squelch level setting.

When the squelch level is set to 5 dBµ;

On in green: RF input is more than 15 dBµ.

On in red: RF input is between 5 dBµ and 15 dBµ.

Off: RF input is less than 5 dBµ.

When the squelch level is set to 10 dBµ;

On in green: RF input is more than 20 dBµ.

On in red: RF input is between 10 dBµ and 20 dBµ.

Off: RF input is less than 10 dBµ.

When the squelch level is set to 15 dBµ;

On in green: RF input is more than 25 dBµ.

On in red: RF input is between 15 dBµ and 25 dBµ.

Off: RF input is less than 15 dBµ.

5TX BATT (transmitter battery) indicators

Show the battery conditions of the two wireless microphone

transmitters independently. The indicators start flashing

about one hour before the transmitter batteries go flat.

6MONITOR switch

Select the tuner to monitor. The “1+2” position allows to

monitor the mixed output of both tuners.

7MONITOR volume

Turn to adjust the monitoring level through headphones.

8SQUELCH switch

In ordinary use, set the switch to ON, and the noise and

signal interference will be eliminated when the tuner is in

1ANT (antenna) a/b connectors

Connect the antennas supplied to both ANT a/b connectors.

Note

Be sure to connect two antennas to these connectors, even

when you use one tuner, to make the diversity reception

properly.

2OUTPUT 1/2 (BAL) connectors

The OUTPUT 1 connector supplies audio signal output

from tuner 1, and the OUTPUT 2 connector supplies the

output from tuner 2.

Connect these connectors to the microphone input

connector of a camcorder, mixer, or tape recorder by using

the supplied cable.

3MONITOR connector

To monitor the tuner output, connect the headphones,

equipped with a 3.5 mm (5/32 inch) dia stereo mini jack.

Use either of stereo or monaural headphones. Select the

tuner to be monitored with the MONITOR switch, and

adjust the monitor level with the MONITOR volume.

4RF (radio frequency) indicators

Indicate the strength of the RF input signal and the

receiving antenna for diversity reception of each tuner; the

left pair is for the tuner 1, and the right pair is for the tuner

The indication color shows the strength of the RF input

signal. The indicated signal level changes corresponding to

(GB)

CGP/CH (group/channel) indication

Shows the receiving channel group and channel number.

Each time you press the MODE button the group/channel

indication changes to the frequency, squelch level,

accumulated time of battery use and backlight mode

indications.

For each item setting, see “Settings" from page 7 to 12.

DRF (radio frequency) indications

The number of dots shows the RF input level as below.

Four dots on: more than 35 dBµ

Three dots on: between 25 dBµand 35 dBµ

Two dots on: between 15 dBµand 25 dBµ

One dot on: between 5 dBµand 15 dBµ

No dot: less than 5 dBµ

signal reception stand-by mode. Set to OFF to search outside

noise or a radio wave which may disrupt the transmission.

Note

If you turn off the SQUELCH switch when the tuner is in

stand-by condition for signal receiving or when the RF input

level is low, noise may be heard or the connected device or

speakers may be damaged. Be sure to operate this switch

only after minimizing the input of the connected device.

See “Setting the Squelch Level” on page 10.

9Display section

Shows the status of the tuner; the left display shows the

tuner 1, and the right shows the tuner 2.

For details of each indication, see Ato D.

AAF (audio frequency) indication

Lights when the output audio signal is over the reference

level.

BBATT (battery) indication

Displays the status of the batteries of this tuner.

See “Battery indication” on page 6.

Group/channel Frequency Squelch level

Accumulated time

of battery use

Group/channel and frequency indications show those of

the U66 model as an example

Backlight mode

AFRF BATT

CH GP

AFRF BATT

6(GB)

Power Supply

Installing the batteries

The tuner can operate on four LR6 (size AA) alkaline

batteries continuously for about 5 hours at 25°C (77 °F).

1Slide the battery-holder catches inward to take out the

battery holder.

2Match the polarities and insert the batteries.

3Set the battery holder in the original position.

Confirm that both catches on the holder are locked.

Battery indication

When you turn the power on, the battery status of this unit

appears in the BATT indication on the display section.

Note

The indication may be incorrect if the batteries are not new

when installed. If you plan to use the tuner for a long

period, it is best to replace the batteries with new ones.

0+ (+ selection) / –(–selection/reset) buttons

When setting the transmission channel, frequency, squelch

level and backlight mode, press these buttons to change its

contents. The “–” button resets the accumulated time

indication to “00:00”.

qa SET button

Press to set and fix the item on the display.

qs MODE button

Press to select the item shown on the display.

qd CONTROL switch

Select the tuner to be set.

qf POWER switch

Turns the power of the tuner ON or OFF.

qg DC 12V IN connector

For external power operation, connect to an external power

supply (DC 10 V to 17 V) of a camcorder using the supplied

power cable.

For connecting the antennas, output cables and DC power

cable and attaching the unit to a camcorder, see

“Appendix” on page 15.

Four Alkaline batteries LR6 (sizeAA)

Parts Identification

Andere Handbücher für WRR-862A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Sony Tuner Handbücher

Sony

Sony MB-806A Bedienungsanleitung

Sony

Sony WRR-810A Bedienungsanleitung

Sony

Sony ST-JX410 - Fm/am Tuner Bedienungsanleitung

Sony

Sony WRU-806B Bedienungsanleitung

Sony

Sony WRR-805A Bedienungsanleitung

Sony

Sony WRR-861B Installations- und Betriebshandbuch

Sony

Sony WRR-862A Bedienungsanleitung

Sony

Sony WRR-800A Bedienungsanleitung

Sony

Sony ST-JX390 Bedienungsanleitung

Sony

Sony WRR-850A Bedienungsanleitung

Sony

Sony ST-SA50ES - Am/fm Tuner Bedienungsanleitung

Sony

Sony MB-8N Bedienungsanleitung

Sony

Sony WRR-800A Bedienungsanleitung

Sony

Sony STR-NX1 Bedienungsanleitung

Sony

Sony ST-J88B Bedienungsanleitung

Sony

Sony ST-S770ES Bedienungsanleitung

Sony

Sony ST-JX401 Bedienungsanleitung

Sony

Sony MB-8N Installations- und Betriebshandbuch

Sony

Sony ST-D777ES Bedienungsanleitung

Sony

Sony ST-SA3ES Bedienungsanleitung

Sony

Sony WRR-801A Bedienungsanleitung

Sony

Sony WRR-801A Bedienungsanleitung

Sony

Sony XT-100DAB Bedienungsanleitung

Sony

Sony MB-8N Bedienungsanleitung

Beliebte Tuner Handbücher anderer Marken

Tunersys

Tunersys WS16 1 Bedienungsanleitung

Arcam

Arcam DT91 Bedienungsanleitung

Magnum

Magnum MD 102T Bedienungsanleitung

HDHomeRun

HDHomeRun 20121008 Bedienungsanleitung

Crestron

Crestron C2N-TXM Bedienungsanleitung

Eico

Eico HFT-92 Bedienungsanleitung

MFJ

MFJ MFJ-928 Bedienungsanleitung

NAD

NAD C 445 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SC-FM1 Bedienungsanleitung

Antique Automobile Radio

Antique Automobile Radio 283501B Bedienungsanleitung

Monacor

Monacor PA-1200R Bedienungsanleitung

Technics

Technics ST-X301L Bedienungsanleitung

Manhattan

Manhattan 176156 Bedienungsanleitung

Marantz

Marantz ST-15S1 Bedienungsanleitung

Korg

Korg HA-40 Bedienungsanleitung

Harman Kardon

Harman Kardon TU915 Bedienungsanleitung

Teac

Teac T-1D Bedienungsanleitung

Pioneer

Pioneer GEX-P700DAB Bedienungsanleitung