SOUNDMASTER CD9110 Bedienungsanleitung
CD9110 / English Instruction Manual
LOCATION OF CONTROLS
1. ESP/DIRECTORY SEARCH
2. BASS BOOST
3. DC INPUT SOCKET
4. VOLUME +
5. SKIP+/F.FWR
6. VOLUME –
7. PLAY/PAUSE
8. STOP/POWER OFF
9. MODE
10. SKIP-/REV
11. CD DOOR OPEN SWITCH
12. DISPLAY
13. PHONE JACK
14. CD DOOR
15. CD PROGRAM BUTTON
16. CHARGE INDICATOR
POWER SUPPLY
Using Battery (Batteries not included)
1.) Open the lid of the battery compartment
2.) Insert 2”AA”Size (UM-3) alkaline batteries by matching the (+ and -) to the diagram inside the battery compartment and
close the lid.
Noted: * Do not mix new batteries with old one
*Do not use different types of batteries together
AC Power Adaptor
Insert the adapter plug into the DC input jack on the unit
1.) Plug the adapter into the AC wall outlet
2.) Unplug from wall outlet when not in use
Noted: Use only a 4.5V DC, 600mAAdapter
CD9110 / English Instruction Manual
ALKALINE BATTERY INSTALLATION
Slide the OPEN switch to open the CD door, insert two AA batteries (not included) into the battery compartment. Be sure to
observe the proper polarity (the “+”and ”-”signs) as indicated on the battery compartment.
Note: When replacing alkaline batteries, use two new batteries of the same type. Do not mix a used battery with a new one or
mix different types of batteries.
When inserting the batteries, incorrectly inserting even one with improper polarity will cause leakage.
Never charge, heat, disassemble, or throw batteries into a fire.
Old or discharged batteries must be recycled or disposed of properly in compliance with all applicable laws. For detailed
information, contact your local solid waste authority.
If the display is blank (no numbers show when the PLAY/PAUSE button is pressed), the batteries are dead. Replace them
(also ensure you insert the batteries according to the “+”and “-”as shown inside the battery compartment).
CD Disc Operation
Warning: To protect your hearing if you are using headphones or earphones, set VOLUME to its lowest setting before you
play a CD
1.) Power is on by pressing PLAY ►button
2.) Slide the OPEN button and open the lid
3.) Place the CD firmly “with the label side facing up”on the pivot and close the CD Door.
4.) Press PLAY►button to start CD
5.) Adjust the Volume with the Volume -/Volume + button
6.) Press the PLAY/PAUSE button to pause the playing audio file.
7.) Press the STOP button to stop the playback
8.) Skip/Search Button –Press once to kip to next track or back to previous track
a. Press Continuously to search forward or backward
9.) Power is off by pressing the STOP button twice
Directory Search Function (for MP3 CD)
This feature allows you to skip to different directories on your MP3 disc. It makes file searching easier and faster.
While playing an MP3 CD, press the ESP/DIR button once. The display will shown the next directory file.
Repeat One/All-Track/Album/Random/Intro by pressing MODE button
Press once: Repeat current track Press three times (MP3 four times): Random Play
Press twice: Repeat all tracks Press four times (MP3 five times): Intro Play (10 seconds each song)
Press three times: Repeat Album (for MP3 CD only)
CD9110 / English Instruction Manual
CHARGING RECHARGEABLE BATTERY
1. Put the metal cap onto the “-“side of one of the 2 rechargeable batteries.
2. Insert the 2 batteries following the polarity as indicated in the battery compartment and positioned as show
below.
3. Connect Adaptor plug to the DC input jack of unit and the corresponding end to an AC household outlet.
Charge Indicator will light
4. After charging for 15 hours, unplug the adaptor. Charge Indicator will go off.
Important:
In order for the charge function to perform properly, one of the rechargeable batteries must be covered by the
Metal cap as illustrated above
Program Play
You can program up to CD20/MP3 99 tracks to play/in any order you choose.
CD mode:
2) During stop mode, press PROG button, the “PGM”indicator will appear with the track number and playing order
3) Press or SKIP/SEARCH button to choose a track
4) Press PROG button to store the track on the current program number.
5) Repeat steps 2 and 3 to program desired tracks
6) Press ►PLAY/PAUSE button, to play the tracks
CD9110 / English Instruction Manual
MP3 mode:
1) During stop mode, press PROG button, the “PGM”indicator will appear with the track number and playing order
2) Press or SKIP/SEARCH button to choose a directory number
3) Press PROG button once
4) Press or SKIP/SEARCH button to choose a track
5) Press PROG button to program the track
6) Repeat steps 2, 3 and 4 to program desired tracks.
7) Press ►PLAY/PAUSE button, to play the tracks.
8) To Erase the program, press STOP button twice
BBS Power Bass Sound
Press the BBS button, to enjoy more powerful bass boosted sound
To Prevent Sound from Skipping (Anti Skip System)
When the ESP function is turned on, you can see “ESP”is displayed on the LCD. ESP function is on
This ESP function is solely for audio CD only. For MP3 mode, ESP is automatically activated whenever the player is used for
playing MP3 disc.
CD ESP time is about 40 seconds
MP3 ESP time is about 120 seconds
Off ESP (for CD only), press ESP button once
Notes:
When using ANTI SHOCK function the battery power consumption increases because the disc rotates faster then normal and
the dynamnic memory is active.
Whilst the ANTI SHOCK function provides for continuous sound output when the unit subjected to shock or vibration. It will
not correct errors arising from the use of defective scratched or dirty discs.
When powering the player solely from batteries, only use the ANTI SHOCK function were necessary to preserve their life.
CLEANINGTHE PICKUP LENS
Dust on the pickup lens can lead to erratic operation and interruption of the sound during play.
To clean the pickup lens, open the disc compartment. Blow the dust off the lens using a camera lens blower( available at most
camera stores). Do not touch the surface of the lens.
CD9110 / English Instruction Manual
CLEANINGTHE CABINET
Use only a soft , water-dampened cloth to clean the unit’s exterior . Never use benzine or other strong chemical cleaners ,
since these could damage the finish. It is important that no liquid reaches the inside of the unit
NOTE: Do not touch the surface of the pickup lens. Do not allow any liquids on the inside of the product.
-----To clean the pickup lens, open the CD Door and blow the dust off the pickup lens using a camera lens blower(available at
most camera stores).
-----To clean the CD player cabinet, use a soft and damp cloth to wipe off the exterior surface.
-----Never use benzene or other strong chemical cleaners as these can damage the product’s finish.
HANDLING DISCS
This product is designed to play CDs bearing the DISC Identification logo. CDs not carrying this logo may not conform to
the CD standard and may not play properly.
Dirty, scratched, or warped discs may cause skipping or noise.
---------Handle the CD only by the edges.
---------To keep the CD clean , do not touch the surface of the disc.
---------Return CDs to their original cases after use to avoid serious scratches that could cause the laser pickup to skip.
--------Do not expose CDs to direct sunlight, high humidity or high temperatures for extended periods of time as prolonged
exposure to high temperatures can warp CDs.
---------Do not apply paper or write anything on either side of a CD. Sharp writing instruments or the inks in some felt-tip
pens may damage the surface of a CD
To clean CDs:
----------Fingerprints should be wiped from the surface of the CD with a soft cloth. Unlike conventional records, CDs have no
grooves to collect dust and microscopic debris, so gently wiping the CDs with a cloth removes most of the particles.
-----------Wipe in a straight motion from the inside to the outside of the CD.
------------Never use chemicals (i.e. record cleaning sprays, anti-static sprays, benzene or thinner) to clean CDs as damage to
the plastic of the CD may occur.
To clean the CD player:
Dust on the pickup lens can lead to erratic operation and interruption of the sound during play.
CD9110 / English Instruction Manual
TROUBLE SHOOTING GUIDE
SYMPTOM
CAUSE
SOLUTION
CD will not play
Disc is inserted incorrectly
Reinsert CD with the label side
facing up.
Defective or wrong type
compact disc
Try another audio compact
disc(DVD or data disc will not work)
CD Door is not closed
Close the lid securely(press down on
door)
Moisture has formed on the
inside of the CD player
Take out the CD and leave the CD
Door open for about an hour to dry
the moisture condensation
No sound from
headphone
Headphone plug not is inserted
properly
Reinsert the headphone plug into the
headphone jack
Headphone plugged into the
line out jack
Plug headphone into the Headphones
Jack(not the Line Out jack)
The volume control set to
minimum
Increase the volume
Weak batteries
Replace with fresh batteries or use
the AC Power Adaptor
Defective CD
Try another CD
Sound is skipping
The CD or pickup lens is dirty
Clean or replace the CD or clean the
pickup lens using a camera
brush/blower
Too much movement of the CD
player
Reduce the movement of the CD
player.
Anti-skip button is turned off
Turn on the anti-skip button
Sound is distorted
Music is too loud
Decrease the volume
Weak batteries
Replace with fresh batteries .
Technical details:
- Digit LCD read out
- CD/CD-R/MP3 compatible
-Anti shocked 120 sec. for MP3 and 40 sec. for CD
- Battery types: 2 x 1.5Volt “AA” UM3 (not included)
WARNING! Risk of hearing damage
To prevent possible hearing damage, do not listen at high volume levels of long periods.
Inhaltsverzeichnis
Andere SOUNDMASTER CD-Player Handbücher
SOUNDMASTER
SOUNDMASTER SCD-6300MP3 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER DISC4020 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER SCD-2650 USB Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER SCD5701 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER RCD1750SI Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER SCD3550 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER RCD1770 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER CD9180 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER KCD1600 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER RCD5000 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER KCD1600 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER SCD1960 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER RCD1180 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER SCD 2400 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER SCD8000 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER MCD 800 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER DAB970 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER SCD1960 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER RCD 1150 Bedienungsanleitung
SOUNDMASTER
SOUNDMASTER High line SCD 2700USB Bedienungsanleitung
