SoundPeats Mini Pro HS Installationsanleitung

SOUNDPEATS

FAQ

BLUETOOTH-------------------------------------------------------------------- 2

SOUND--------------------------------------------------------------------------- 4

CHARGING---------------------------------------------------------------------- 6

TOUCH CONTROL------------------------------------------------------------ 7

APP--------------------------------------------------------------------------------8

CUSTOMER SERVICE TEAM-------------------------------------------- 10

SOUNDPEATS

BLUETOOTH

How to pair SoundPEATS Mini Pro HS?

1. The earbuds automatically pair to each other after being taken out from the

charging case. LED indicator on main earbud flashes in red and white, the

other earbud stays in white.

2. Activate Bluetooth on the device, and choose "SOUNDPEATS Mini Pro HS"

on Bluetooth list to pair.

How to reset SoundPEATS Mini Pro HS?

1. Clear the paring record from your device.

2. Please back both earbuds into charging case and make sure they are in

charging status.

3. Press and hold both buttons for 10s until both LED flash in red and white

twice, reset complete.

Why is the Bluetooth connection unstable sometimes?

Reasons

Workarounds

Case 1

When using the earbuds close to personal computers,

Wi-Fi routers, microwave ovens, refrigerators, etc.

Refrigerators, microwave ovens, Wi-Fi routers, personal

computers, etc. are devices that emit radio waves.

The earbuds may be affected by these radio waves when

using them in a location with a mixture of multiple radio

waves.

Please use the earbuds away

from Wi-Fi routers, personal

computers, microwave

ovens, refrigerators, etc. in

order to avoid radio wave

interference.

Case 2

When using the Bluetooth device in the pocket of the

chest or pants, or a bag while listening to the audio.

If the engine ear is diagonal to the Bluetooth device, it will

affect the Bluetooth signal. As human body is the biggest

source of signal blocking.

When put the Bluetooth

device in a pocket or bag,

move the Bluetooth device to

a place where there are no

obstacles between Bluetooth

device and earbuds (such as

the human body) for

Bluetooth communication.

Case 3

When using the earbuds closes to the other Bluetooth

devices.

The earbuds may be affected by these radio waves when

Turn off the Bluetooth

function of the other

Bluetooth devices.

SOUNDPEATS

using them in a location with a mixture of multiple radio

waves.

Case 4

When using the device away from the earbuds, such as

in a different room.

Bluetooth communication gradually becomes weaker the

further away Bluetooth earbuds are placed from a Bluetooth

player.When using Bluetooth earbuds and a Bluetooth

player in different rooms with the doors closed, Bluetooth

communication may be weak.

Keep the Bluetooth earbuds

as close to the Bluetooth

player as possible.

Case 5

When a lot of applications are running at the same time

when use the Bluetooth function.

Quit apps which you are not

using on the device to reduce

the load.

What can I do if the earbuds stopped connecting to my device?

1. Clear the pairing record between the earbuds and all of the previous

devices.

2. Try to clear some Bluetooth listings on your device and restart the device.

3. Put the earbuds into the charging case to reset.

4. Activate Bluetooth on the device, and choose "SOUNDPEATS Mini Pro HS"

on Bluetooth list to pair.

What can I do if the left earbud and the right earbud won’t work

together?

1. Please use a bit of light sandpaper or microfiber cloth with a bit of rubbing

alcohol to clean the charging connectors to ensure the earbuds charge well.

2. Put them into the charging case to reset.

What can I do if the earbuds connect to my phone, but not my

Mac-book/computer?

1. Unpaired the earbuds from the phone, then the earbuds will lose Bluetooth

connection to the phone.

2. Put the earbuds into the charging case to reset.

3. Then open the Bluetooth of your Mac-book/computer to connect.

4. If those do not help, you may need to update your computer's Bluetooth

driver. There is no driver for it. Bluetooth drivers must come from the specific

manufacturer for your exact computer model. Download and install the

appropriate Bluetooth driver from the computer vendor's website, then restart

SOUNDPEATS

your system before attempting to pair and connect to your SoundPEATS

earbuds.

Why is the signal intermittent when I am outdoors?

In the outdoors, the Bluetooth signal will be interfered, such as subways,

high-speed rails, trains, dense traffic lights, car engines and so on. And if the

phone is in your pocket, and the engine ear is diagonal to the phone, it will

affect the Bluetooth signal. As human body is the biggest source of signal

blocking. So when the left earbud is the engine earbud, please put your phone

in the left pocket, which will be better.

SOUND

Why does the volume of the earbuds reduce after using a period of

time?

1. It may be caused by the sound hole being blocked by foreign objects.

Please try to gently clean it with a little alcohol to avoid dust or secretions

blocking.

2. Please change other devices to see if the problem still exists.

3. Please also try to remove the silicone ear piece and gently clean off the

screen with a little alcohol to see if that will help.

What can I do if one earbud is quieter than the the other?

1. Please change other songs or videos. For some songs and videos, the

sound effect is unstable.

2. Please change other devices. You can try this way:

- Unpaired and delete from your original device

- Pair to a new device and play music

- Unpaired and delete from this new device

SOUNDPEATS

- Pair back with original device

3. Try to reset the earbuds.

4. Please also adjust the “Audio Equalizer” in your phone to see if it helps:

1) For iPhone: [General] - [Accessibility] - [Hearing]

2) For Android: [Accessibility features] - [Accessibility] - [Audio balance]

Why the other side could not hear me when calling?

1. Please choose to pick up phone calls via the earbuds.

2. Please do not mute the phone calls.

3. Please clean the Mic holes to avoid dust or secretions blocking.

4. Please wear both the earbuds instead of any single one.

5. Please kindly adjust the volume through the earbuds and devices.

6. If you are using the earbuds with an Android phone, please check the

settings to see if you have allowed both phone audio and media audio to be

transmitted through the earbuds.

7. Please change other devices to have a try.

Why doesn't the mic work well when the earbuds are connected to

the PC/laptop?

When you connect our earbuds to the PC/laptop, for some devices in old

windows version, it may show two lists:

"SOUNDPEATS Mini Pro HS Hands- Free AG Audio"

"SOUNDPEATS Mini Pro HS Stereo"

please kindly choose "SOUNDPEATS Mini Pro HS Stereo" to play media audio,

and if you use call audio, you can manually change to "SOUNDPEATS Mini

Pro HS Hands- Free AG Audio" to give a try.

If you want use call audio via the earbuds on your Mac or Windows, please set

the as follows:

A) Input device:

Disable: Realtek(R) Audio as speaker and "SOUNDPEATS Mini Pro HS

Stereo"

B) Output device:

Disable: Realtek(R) Audio as microphone or stereo mix

C)Please only set "SOUNDPEATS Mini Pro HS Hands- Free AG Audio" as the

Input device and Output device. Then you will use earbuds to make call audio.

SOUNDPEATS

CHARGING

What does the indicator on the charging case tell?

It shows the battery power left in the charging case.

50%-100% Green

10%-49% Yellow

10% or less Red

While charging the case, the indicator flashed slowly.

0%-19% Red

20%-69% Yellow

70%-99% Green

100% Green LED stays on

How to charge the charging case?

1. Use a Type-C adapter to charge the case(current no more than 1A)

2. Please charge the earbuds and charging cases at least once per 3 months

when not in use for a long time.

What should I do if the charging case won’t charge?

Please try to use another known working charging cable to charge

the charging case for more than 10 hours through your computer. Compared

to other electronics, the headphones are low power products. Hence for

charging safety, please do not use fast charger.

What can I do if any earbud stopped charging?

Please put the earbuds into the case and you will see the red light on the

earbuds when charging. If no light , please use a bit of microfiber cloth with

rubbing alcohol to clean the charging connectors and try to adjust the earbuds

to ensure the red light is on. Then please charge the earbuds for 2 hours.

Warm tip: Please be careful not to press the earbuds too hard in the charging

case, so as not to damage the copper pillars in the charging case.

SOUNDPEATS

Why are the earbuds still connecting to my phone after placing

them back and close the case lid?

1. The charging case has no remaining power. Placing the earbuds back into

the charging case can’t turn them off if the case battery is dead.

2. Please make sure the earbuds are correctly placed in the charging case,

and make sure the charging contacts are clean. Please try to clean the places

between the charging case and the earbuds with something like a microfiber

cloth.

Does the earbuds not use for a long time without charging cause the

earbuds not to turn on or the battery to drain quickly?

In fact, the battery of the earbuds needs maintenance.

Actually you need to charge your electronics at least every three months, if not,

the earbuds can cause deep self-discharge by not charging for a long time,

damaging the battery. In addition, not using the earbuds for a long time, and

earbuds storage location is not dry, moisture will also cause damage to the

earbuds.If you haven't used your headphones for five months, the battery is

probably dead.

At this point, we suggest that you first check whether the charging case has

power (whether the indicator light is on) and whether the charging contact at

the bottom of the earbuds and charging case is dirty. If there is dirt, please

clean the charging contact at the bottom of the charging case with dry cloth or

dry paper towel. As for earbuds not turn on or the battery drain rapidly when

earbuds are taken out of the case, we recommend you to repeatedly place the

earbuds into the charging case for 2 hours and close the cover. Please try it for

1-2 days.

TOUCH CONTROL

What can I do if the touch controls do not work always?

1. Please touch the middle of the control zone. And when your hand is wet, the

touch control may not work, please keep your hand dry.

2. Please try to skip the songs more times, you will find the best frequency to

SOUNDPEATS

control the earbuds. When you don't find the frequency you may think the

earbuds don't work, please give it some patient.

3. Another way for you to have a try: discharge the earbuds, then charge and

reset.

APP

How to register an account?

1. fill in email address; set and confirm password;

2. click "get verification code";

3. Type in the code you get from your email;

4. Finish register;

Fail to receive the verification code?

1. Make sure your phone is connected with good network and try to send the

code again about 2 minutes later;

2. Check your spam folders/junk inbox first;

3. Try to register with a different email address;

4. Uninstall the App of the SoundPEATS

then re-install it and restart your device to register again;

5. Please manually type your e-mail into the area instead of auto fill for your e

mail address, and also please pay attention to the format of English letters

and the space before and after the email address;

6. Please try to turn off anti-virus software. If you have data encryption

software on your phone, you may have to turn it off momentarily;

What can I do if the earbuds won’t connect to the APP?

1. Please first to check if your SoundPEATS earbuds app has updated to the

newest version.

You can log in the app and find the icon with three bars in the upper left corner,

find "about" to check the SOUNDPEATS version is. Please upgrade to make

sure you get the newest version.

2. Please make sure that the earbuds Bluetooth name is the default

“ SOUNDPEATS Mini Pro HS “.If you changed the default name, please

SOUNDPEATS

change to its original format. Then restart your phone. Please note that if you

change the default Bluetooth name of the model, it may cause connection

issue to this app.

3. Please make sure both earbuds pair with each other, then connect to you

phone first. After the earbuds connected to your phone, then please open the

app to connect earbuds.

4. If the earbuds could not still connect to app, please follow the steps one by

one:

-try to turn off earbuds app completely (Turn off the background running of the

app totally);

-unpaired the earbuds via your phone, then turn off phone Bluetooth;

-put two earbuds into the charging case and do a reset as the manual;

-reconnect the earbuds to your phone first after reset (In this step, please

make sure SoundPEATS APP is off);

-re-open the app to search earbuds to connect to app;

What can I do if the APP could not update?

Please try the following:

1. Please try to reset the earbuds as the manual;

2. Take the earbuds out of the charging case and leave some time for the two

earbuds to pair with each other. Then please turn on the blue tooth of your

phone to connect with the earbuds;

3. Make sure your phone is connected with good network. Turn off the app and

reopen it;

4. Try to connect the app with your phone and do the upgrade again;

Precautions during the app upgrade process:

1. During the upgrade, the distance between the earbuds and the mobile

phone must be within 0.5 meters;

2. Do not put the earbuds into the charging case;

3. Do not disconnect, play music, or answer the phone calls;

4. Don't close or shrink the upgrade page;

SOUNDPEATS

CUSTOMER SERVICE TEAM

What should I do if the problem about the earbuds is not mentioned

in this FAQ?

If there is no solution for your problem in this FAQ, please feel free to contact

our Customer Service Team and we will provide you a solution as soon as

possible. If we confirmed that the problem couldn't be solved, we will apply the

replacement or refund for you. SoundPEATS provides an 12-month warranty

for every product. Your satisfaction is always greatly important to us.

Andere Handbücher für Mini Pro HS

Inhaltsverzeichnis

Andere SoundPeats Kopfhörer Handbücher

SoundPeats

SoundPeats Free2 classic Installationsanleitung

SoundPeats

SoundPeats H2 Bedienungsanleitung

SoundPeats

SoundPeats T3 Bedienungsanleitung

SoundPeats

SoundPeats H2 Bedienungsanleitung

SoundPeats

SoundPeats Air3 Bedienungsanleitung

SoundPeats

SoundPeats Engine 4 Bedienungsanleitung

SoundPeats

SoundPeats Truengine 3 SE Bedienungsanleitung

SoundPeats

SoundPeats Mini Pro HS Bedienungsanleitung

SoundPeats

SoundPeats Truengine2 Bedienungsanleitung

SoundPeats

SoundPeats Air4 Lite Installationsanleitung

SoundPeats

SoundPeats H1 Bedienungsanleitung

SoundPeats

SoundPeats TrueAir Bedienungsanleitung

SoundPeats

SoundPeats TrueFree+ Bedienungsanleitung

SoundPeats

SoundPeats Mini Pro Bedienungsanleitung

SoundPeats

SoundPeats T2 Bedienungsanleitung

SoundPeats

SoundPeats Q Bedienungsanleitung

SoundPeats

SoundPeats TrueAir2 Bedienungsanleitung

SoundPeats

SoundPeats Air3 pro Bedienungsanleitung

SoundPeats

SoundPeats Air3 Deluxe Installationsanleitung

SoundPeats

SoundPeats Air3 Deluxe Bedienungsanleitung

SoundPeats

SoundPeats T3 Bedienungsanleitung

SoundPeats

SoundPeats Capsule3 Pro Bedienungsanleitung

SoundPeats

SoundPeats Free2 classic Bedienungsanleitung

SoundPeats

SoundPeats Air3 pro Installationsanleitung

Beliebte Kopfhörer Handbücher anderer Marken

Sony

Sony MDR-NC8 Bedienungsanleitung

AUSounds

AUSounds AU-Stream Bedienungsanleitung

ENERGY SISTEM

ENERGY SISTEM Style 7 Bedienungsanleitung

Philips

Philips SHE3622 Bedienungsanleitung

Insignia

Insignia NS-CAHBTSPORT Bedienungsanleitung

Movie Vision

Movie Vision HP-400 Bedienungsanleitung

MobiFren

MobiFren SM Pro Bedienungsanleitung

Motorola solutions

Motorola solutions PMLN8120 Bedienungsanleitung

Jaybird

Jaybird freedom Installationsanleitung

Sony

Sony MDR-ED12LP Bedienungsanleitung

HiFuture

HiFuture Tidy Buds Pro Bedienungsanleitung

Creative

Creative CB2530 Bedienungsanleitung

Renkforce

Renkforce RF FTVK-100 Bedienungsanleitung

Philips

Philips SHQ3000 Bedienungsanleitung

Sennheiser

Sennheiser 500371 Bedienungsanleitung

Califone

Califone 2924AV Bedienungsanleitung

Philips

Philips EARGEAR HE205 Series Bedienungsanleitung

Technics

Technics EAH-AZ80 Bedienungsanleitung