SOYO SY-6ICA Bedienungsanleitung

SY-6ICA

Motherboard

Quick Start Guide

Hardware

Installation

Quick BIOS

Setup

Introduction

The SOYO CD

YAMAHA

Sound Driver

Installation

SOYO™

SY-6ICA Motherboard

Pentium

III & Pentium

II processors

Intel FW82820 AGP/PCI/AMR Motherboard

100 & 133 MHz Front Side Bus supported

ATX Form Factor

Trademarks:

Soyo is the registered trademark of Soyo Computer Inc. All trademarks are the properties of

their owners.

Product Rights:

All names of the product and corporate mentioned in this publication are used for identification

purposes only. The registered trademarks and copyrights belong to their respective companies.

manual may be reproduced, transmitted, transcribed, translated into any other language, or

stored in a retrieval system, in any form or by any means, such as by electronic, mechanical,

magnetic, optical, chemical, manual or otherwise, without permission in writing from Soyo

Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warranties regarding the contents of this

manual. We reserve the right to amend the manual or revise the specifications of the product

described in it from time to time without obligation to notify any person of such revision or

amend. The information contained in this manual is provided to our customers for general use.

Customers should be aware that the personal computer field is subject to many patents. All of

our customers should ensure that their use of our products does not infringe upon any patents. It

is the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and not to

infringe upon or to cause others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

This Quick Start Guide can help system manufacturers and end users in setting up and installing

the Motherboard. Information in this guide has been carefully checked for reliability; however,

to the correctness of the contents there is no guarantee given. The information in this document

is subject to amend without notice.

For further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

6ICA Serial - Version 1.0 - Edition: February 2000

*Thesespecificationsaresubjecttoamendwithoutnotice

SY-6ICA

Quick Start Guide

Introduction

Congratulationsonyourpurchaseofthe

SY-6ICA

Motherboard.ThisQuickStart Guide

illustratesthestepsforinstallingandsettingupyournewMotherboard.

ThisguideprovidesalluserswiththebasicstepsofMotherboardsettingandoperation.For

furtherinformation,pleaserefertothe SY-6ICAMotherboardUses’Guidethatcamewith

yourMotherboard.

Unpacking

WhenunpackingtheMotherboard,checkforthefollowingitems:

TheSY-6ICAFW82820AGP/PCI/AMRMotherboard

ThisQuickStartGuide

TheInstallationCD-ROM

SOYO3-in-1BonusPackCD-ROM(Norton AntiVirus,Ghostand

VirtualDrive)

TheFoldableURM(UniversalRetentionMechanism)Set

(Factoryinstalledonthismotherboard)

OneIDEDeviceATA66FlatCable

OneFloppyDiskDriveFlatCable

SY-6ICA Quick Start Guide

Introduction

SY-6ICA Motherboard Layout

(Optional)

PRT

USB 1

USB 2

PS/2 KB

Connector

PS/2 Mouse

Connector

PCI Slot #1

PCI Slot #3

PCI Slot #5

PCI Slot #4

AMR

Lithium

Battery

CPUFANPWRFAN

1 1

Winbond

W83627HF

-AW

IDE 2IDE 1

FDC

ATX Power

LINE-OUT

LINE-IN

MIC JACK

JOYSTICK

JP9

JP7

JP10

JP1

JP44

WOL

Header

JP5

Jumper

CMOS Clear

RIMM 1

RIMM 2

CHAFAN

COM2

PCI Slot #2

CODEC

AC97

Speaker

Keylock

Power

LED

ACPI

LED HDD

LED

Reset

PWRBT

Intel

FW82801AA

Intel

82802AC

4MB

IR1

SDRAM

COM 1

Slot 1

AGP Slot

Intel

FW82820

For

Pentium II or Pentium III

(SECC& SECC2)

Processors

J10

CD-IN

JP15

SY-6ICA

Quick Start Guide

Introduction

Key Features

SupportsIntel®processors

-FSB100MHz:Pentium®II(350-

450MHz)&Pentium®III(450-733MHz)

-FSB133MHz:Pentium®III

(533/600MHz)

Supports100/133MHzFrontSideBus

Frequency

Auto-detectCPUvoltage

EasyCPUsettingsinBIOSwiththe

“SOYOCOMBOSetup”

PC99,ACPI

UltraDMA33/66(ATA33/66)

SupportsWake-On-LAN (WOL)

DirectRambus™memorytechnology

Maximummemorysizeupto1GBusing

256MbDirectRDRAMtechnology

SupportsACPISuspendIndicator

Power-onbymodem,alarm,PS/2

KeyboardandMouse

Powerfailureresume

SupportsSuspendtoRAM

Supportsonboardhardwaremonitoring

andincludesHardwareDoctor™utility

Fanspeedcontrol

BatteryLowvoltageDetect

Support7setsofvoltagemonitoring

Supportsmultiple-bootfunction

Y2KComplaint

AGP2.0Compliant;

AGPUniversalConnectorsupports:

-1.5Vand3.3VAGPcards

-1X/2X/4Xdatatransfer

HardwareRandomNumberGenerator

(RNG)forenablingenhancedplatform

security

RTChardwaretohandleY2KCentury

Rollover

SupportsAudioModemRiserslot(AMR

1.0compliant)*

2xRIMMslotsforRDRAMmemory

1x32-bitAGPslot

5x32-bitbusmasterPCIslots

2xUSBportsonboard(USB3share

USB2)

1xIrDAport

ATXpowerconnector

*IftheuserwantstouseaModemRisercard(MR)makesuretousea

Secondary

modeMR,

PRIMARY

modeMRs are

NOT

Supported.

SY-6ICA Quick Start Guide

Hardware

Installation

ToavoiddamagetoyourMotherboard,pleasefollowthesesimpleruleswhile

handlingthisequipment:

BeforehandlingtheMotherboard,groundyourselfbytouchingontoanunpainted

portionofthesystem'smetalchassis.

RemovetheMotherboardfromitsanti-staticpackaging.Holdthemotherboardbythe

edgesandavoidtouchingitscomponents.

ChecktheMotherboardfordamage.Ifanychipappearstobeloose,presscarefully

toseatitfirmlyinitssocket.

Followthedirectionsinthissectionwhichisdesignedtoguideyouthroughaquickand

correctmethodtoinstallyournew

SY-6ICA

Motherboard.Fordetailedinformation,please

refertotheSY-6ICAMotherboard User'sguideandTechnicalReference onlinemanualon

intheCD-ROMpackagethatcamewithyourMotherboard.

Gatherandprepareallnecessarycomponentstocompletetheinstallationsuccessfully:

Slot1processorwithbuilt-inCPUcoolingfan(boxedtype)

RAMBUSmodule

Computercasewithadequatepowersupplyunit

Monitor

PS/2Keyboard

PointingDevice(PS/2Mouse)

Speaker(s)(optional)

DiskDrives:HDD,CD-ROM, Floppydrive…

ExternalPeripherals:Printer,Plotter,andModem(optional)

InternalPeripherals:ModemandLANcards(optional)

Note:

Ifyouwanttouseanexternalspeakerconnectedto"Line-out"port,pleasemake

suretousean"amplifiedspeaker"thatcangenerateproperoutputsoundvolume.

SY-6ICA

Quick Start Guide

Hardware

Installation

Install the Motherboard

Followthestepsbelowinordertoperformtheinstallationofyournew

SY-6ICA

Motherboard.

Step 1. Install the CPU

Mark your CPU Frequency:

RecordtheworkingfrequencyofyourCPU

thatshouldbeclearlymarkedontheCPUcover.

FSB100MHz

350MHz(100x3. 5) 450MHz(100x4.5) 550MHz(100x5.5)

400MHz(100x4.0) 500MHz(100x 5.0) 600MHz(100x6.0)

FSB133MHz

400MHz(133x3.0) 533MHz(133x 4.0) 667MHz(133x5.0)

466MHz(133x3.5) 600MHz(133x 4.5) 733MHz(133x5.5)

CPU Mount Procedure:

Tomounttheprocessorthatyouhavepurchased

separately,followtheseinstructions.

Retention Module Step 1. Open the two sides by folding them up.

Step 2. Insert the CPU into the retention

module. The CPU fits in the CPU

slot in only ONE way, do not try to

force it in.

Step 3. After completely inserting the CPU,

Now your CPU is ready for use.

Note:InstallingaheatsinkandcoolingfanontopofyourCPUisnecessaryforproperheatdissipation.Failingto

installtheseitemsmayresultinoverheatingandpossibleburn-outofyourCPU.

SY-6ICA Quick Start Guide

Hardware

Installation

Step 2. Connections to the Motherboard

ThissectiontellshowtoconnectinternalperipheralsandthepowersupplytotheMotherboard.

TheinternalperipheralsconsistofIDEdevices(HDD,CD-ROM),FloppyDiskDrive,Chassis

Fan,FrontPanelDevices(ACPILED,InternalSpeaker,ResetButton,IDELED,and

KeyLockSwitch.),Wake-On-LANcard,VGAcard,SoundCard,andotherdevices.

FormoredetailsonconnectinginternalandexternalperipheralstoyournewSY-6ICA

Motherboard,pleasereferto SY-6ICAMotherboardUser'sGuideandTechnical Reference

onlinemanualontheCD-ROM.

Connectors and Plug-ins

Wake-On-LANHeader: JP44 CPU CoolingFan:CPUFAN

Pin1 Pin2 Pin3 Pin1 Pin2 Pin3

5VSB GND MP-Wakeup GND 12V SENSOR

ChassisFan: CHAFAN PowerFan:PWRFAN

Pin1 Pin2 Pin3 Pin1 Pin2 Pin3

GND 12V SENSOR GND 12V SENSOR

Pin1 Pin2 Pin3 Pin4

CD-IN: J10

ConnecttoyourCD-ROMaudiooutput.

RGLG

PowerLED Keylock

Pin1 Pin2 Pin3

Pin1 Pin2

5V NC GND

ControlPin GND

Speaker

Pin1 Pin2 Pin3 Pin4

5V NC NC Speakerout

HDDLED ACPI LED PWRBT RESET

Pin1 Pin2 Pin1 Pin2 Pin1 Pin2 Pin1 Pin2

LEDAnode LEDCathode LEDAnode LEDCathode PowerOn/Off GND PowerGood GND

IrDA(Infrared Device Header):IR1

Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10

VCC None IRRX GND IRTX NC NC NC NC NC

ATXPower On/Off: PWRBT

Connectyourpowerswitchtothisheader(momentaryswitchtype).

Toturn offthesystem,press thisswitchand hold downforlonger than 4seconds.

ATXPowerSupply:ATX PW

AttachtheATXPowercabletothisconnector.(ThismotherboardrequiresanATXpowersupply,anAT

powersupplycanNOTbeused.)

WhenusingthePower-OnbyPS/2Keyboardfunction,pleasemakesuretheATXpowersupplyisableto

provideatleast720mAonthe5VStandbylead(5VSB).

Power LED

Key Lock

Speaker

Reset

PWRBT

ACPI LED

HDD LED

SY-6ICA

Quick Start Guide

Hardware

Installation

Step 3. Configure Memory

Thismotherboardincorporates thelatest Direct Rambus™technologymemory subsystem

capableofdeliveringthreetimesthebandwidthofconventional100MHzSDRAMbased

systems.TheboardcomeswithtwoRIMM™socketsformodularmemory expansion,

allowingmaximummemoryarraysizesofupto256MB/512MB/1GBusingRDRAM

modulesthatcomewith64/72Mbit,128/144Mbitor256/288MbitICs.

ThismotherboardsupportsasinglechannelofDirectRDRAMmemorythatcan

accommodateamaximumof32RDRAMdevices.AtaFSBfrequencyof100MHz,300&

400MHzDirectRDRAMsaresupported,AtaFSBfrequencyof133MHz,356&400MHz

directRDRAMsaresupported,providingupto1.6GB/secofdatatransferrate.

Memory Configuration

DirectRambus™signalsaredaisy-chainedthrougheachRDRAMmemorymodule,as

showninthefigurebelow.

Therefore,you must always installatotalof2 Direct RDRAM

andContinuation modules(e.g.,oneDirect RDRAMandoneContinuation modules)

inall twoRIMMslotsto complete thememorysubsystem,

orotherwisethe

motherboardmainmemory willnotbefunctional. ThereisnorestrictiononinstallingDirect

RDRAMandContinuationmodulesinwhichRIMMslots.

RIMM 1RIMM 2

Graphics

Processor

ASIC

-Processor

[RDRAM 1]

[RDRAM 2]

Daisy-chaining the two DRAMs

Memory

Control

Hub

SY-6ICA Direct Rambus Memory Subsystem

*ALWAYS INSTALL RDRAM MODULESTWO

SY-6ICA Quick Start Guide

Hardware

Installation

Step 4. Set the CPU Frequency

ThisMotherboarddoesnotuseanyjumperstosettheCPUfrequency;theCPUsettings

canbechangedthroughtheBIOS[SOYOCOMBOSETUP].PleaserefertoChapter3

“QuickBIOSSetup”for detailson settingthe Coppermine

processorfrequency.

Step 5. Set JP9 for FWH Boot Block Write-Protect

SettingthisjumpertoopenwillpreventthebootblockareaoftheFWH(FirmWareHub)chip

frombeingwrittendatainto,suchthatitiswrite-protectedfromunwantedorabnormalwrite

activity.

Note

:Insomerarecases,thebootblockareawillneedto beflashedtocompletetheBIOS

upgradeprocedure.SettingJP9toopenwillcauseincompleteBIOSupdateinthatcase.

The FWH Boot Block

Write-Protect Locked Unlocked

JP9 Setting open JP9 short JP9

Step 6. Enable/Disable Power-On by Keyboard (JP1)

YoumaychoosetoenablethePower-OnthroughKeyboardfunctionbyshortingpin1-2on

jumperJP1;orshortpin2-3todisablethisfunction.

Power-On by

Keyboard Enable Disable

JP1 Setting

Short pin 1-2 to

enable the Power-

On by Keyboard

function.

Short pin 2-3 and

the Power-On by

Keyboard function is

disabled.

Important: When using the Power-On by Keyboard function, please make sure the

ATX power supply is able to provide at least 720mA on the 5V Standby lead (5VSB)

in order to meet the standard ATX specification.

Andere Handbücher für SY-6ICA

Inhaltsverzeichnis

Andere SOYO Hauptplatine Handbücher

SOYO

SOYO 82430 TX P54C Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-6IBM Bedienungsanleitung

SOYO

SOYO 6KF Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-P4VTE Bedienungsanleitung

SOYO

SOYO SY-6IWM Bedienungsanleitung

SOYO

SOYO SY-7VDA Bedienungsanleitung

SOYO

SOYO TechAID Bedienungsanleitung

SOYO

SOYO 82430 HX/P54C Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-6VBA133-B Bedienungsanleitung

SOYO

SOYO SY-6ICA Bedienungsanleitung

SOYO

SOYO SY-7IWM Bedienungsanleitung

SOYO

SOYO SY-D6IGA Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-7IZM Bedienungsanleitung

SOYO

SOYO SY-KT333 DRAGON Plus Bedienungsanleitung

SOYO

SOYO Motherboard SY-6BA+ IV Bedienungsanleitung

SOYO

SOYO SY-5EMA+ Bedienungsanleitung

SOYO

SOYO SY-6IEM Bedienungsanleitung

SOYO

SOYO 80486 Bedienungsanleitung

SOYO

SOYO SY-P4I875P DRAGON 2 V1.0 Bedienungsanleitung

SOYO

SOYO SY-7IZB+N Bedienungsanleitung

SOYO

SOYO SY-7VCA Bedienungsanleitung

SOYO

SOYO SY-7VCA2 Bedienungsanleitung

SOYO

SOYO SY-7IZM Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-6BA+ III Gebrauchs- und Pflegehandbuch

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung