SOYO SY-6IEM Bedienungsanleitung

SY-6IEM

Mainboard

Quick Start Guide

CTested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

POST CONSUMER

RECYCLED PAPER

100%

Hardware

Installation

Quick BIOS

Setup

Introduction

Onboard Sound

Driver Installation

The SOYO CD

SOYO™

SY-6IEM Mainboard

Pentium

II & Celeron™processors

82440 EX/LX AGP/PCI Mainboard

66MHz Front Side Bus supported

Micro-ATX Form Factor

Trademarks:

Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their

owners.

Product Rights:

Product and corporate names mentioned in this publication are used for identification purposes

only and may be registered trademarks or copyrights of their respective companies.

transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by

any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of

this publication without express written permission of Soyo Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warranties regarding the contents of this

manual. We reserve the right to revise the manual or make changes in the specifications of the

product described within it at any time without notice and without obligation to notify any

person of such revision or change. The information contained in this manual is provided for

general use by our customers. Our customers should be aware that the personal computer field is

the subject of many patents. Our customers should ensure that their use of our products does not

infringe upon any patents. It is the policy of Soyo Computer Inc. to respect the valid patent rights

of third parties and not to infringe upon or assist others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

This Quick Start Guide is for assisting system manufacturers and end users in setting up and

installing the mainboard. Information in this guide has been carefully checked for reliability;

however, no guarantee is given as to the correctness of the contents. The information in this

document is subject to change without notice.

If you need any further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

6IEM Serial - Version 1.0 - Edition: August 1998

*Thesespecificationsaresubjecttochangewithoutnotice

SY-6IEM

Quick Start Guide

Introduction

Congratulationsonyourpurchaseofthe

SY-6IEM

Mainboard.ThisQuickStartGuide

describesthestepsforinstallingandsettingupyournew mainboard.

Thisguideisdesignedforalluserstoprovidethebasicstepsof mainboardsettingand

operation.Forfurtherinformation, pleasereferto SY-6IEMMainboardUser'sGuideand

TechnicalReferenceonlinemanualincludedontheCD-ROMpackedwithyour mainboard.

Unpacking

*Ifyourboardcomeswithadriverdiscandapapermanual,theQuickStartGuideandtheCD-ROMarenotincludedinthepackage.

Whenunpackingthemainboard,checkforthefollowingitems:

TheSY-6IEM82440EX/LXAGP/PCI Mainboard

ThisQuickStartGuide

TheInstallation CD-ROM

TheCPURetentionSet

OneIDEDeviceFlat Cable

OneFloppyDiskDriveFlatCable

SY-6IEM

Quick Start Guide

Introduction

SY-6IEM Mainboard Layout

Key Features

SupportsIntelPentium

processors(233-333MHz)&

Celeron™processors (266-366MHz)

EasyCPUsettingsinBIOSwiththe

“SOYOCOMBOSetup”.

3DPnPaudioonboard

Auto-detectCPUvoltage

PC97,APM,ACPI,UltraDMA/33

Power-onbymodemoralarm

SupportsWake-On-LAN(WOL)

SupportsPower-OnbyPS/2Keyboard

SupportsCreativeSB-LINK™(PC-PCI)

forPCIaudiocard

1x32-bitAGPslot

2x32-bitbusmasteringPCIslots

2xUSBports

1xIrDAport

Supportsmultiple-bootfunction

DMIutility

ATXpowerconnector

COM 1

PRT

USB 1

USB 2

PS/2 KB

Connector

PS/2 Mouse

Connector

LINE-IN

LINE-OUT

MIC JACK

JOYSTICK

COM 2

ISA Slot #2

CPUFAN

IDE 1 1

IDE 21

FDC

ISA Slot #1

ATX

Power

DIMM 1 DIMM 2

PCI Slot #1

PCI Slot #2

Lithium

Battery

JP44 1 3

Slot 1 for

Pentium®

II Processor

AGP Slot

Flash BIOS

Intel®

82371 EB

SB-LINK™

(PC-PCI)

CHAFAN

JP5 3

CMOS Clear

Jumper

J2 J3

CD-IN

Ultra

I/OChipset

ESS®

ES1898

JP1

JP2

1 3

Reset

PWRBT

Turbo

LED

HDD LED

Intel®

82443 EX/LX

SY-6IEM

Quick Start Guide

Hardware

Installation

Toavoiddamage toyour mainboard,followthesesimpleruleswhile

handlingthisequipment:

Beforehandlingthemainboard,groundyourselfbygraspinganunpaintedportionof

thesystem'smetalchassis.

Remove the mainboardfromitsanti-staticpackaging.Holditbytheedgesandavoid

touchingitscomponents.

Check the mainboardfordamage.Ifanychipappearsloose,presscarefullytoseatit

firmlyinitssocket.

Followthedirectionsinthissectiondesignedtoguideyouthroughaquickandcorrect

installationofyournew

SY-6IEM

Mainboard.Fordetailedinformation,pleasereferto SY-

6IEMMainboardUser's GuideandTechnical Reference onlinemanualincludedontheCD-

ROM packedwith your mainboard.

PREPARATIONS

Gatherandprepareallthenecessaryhardwareequipmenttocompletetheinstallation

successfully:

Pentium

processorwithbuilt-inCPUcoolingfan(boxedtype)

SDRAMmodule

Computercaseandchassiswithadequatepowersupplyunit

Monitor

PS/2Keyboard

PointingDevice(PS/2Mouse)

VGACard

Speaker(s)(optional)

DiskDrives:HDD,CD-ROM,Floppydrive…

ExternalPeripherals:Printer,Plotter,andModem(optional)

InternalPeripherals:ModemandLANcards(optional)

Notice1:

Thismainboardfeaturesthreebuilt-inaudio-stereoports.Thereforeyoudonot

needtoinstallasoundcard.

Notice2:

Ifyouwanttouseanexternalspeakerconnectedto"Line-out"port,pleasemake

suretousean"amplifiedspeaker"thatcangenerateproperoutputsoundvolume.

SY-6IEM

Quick Start Guide

Hardware

Installation

Install the Mainboard

Followthestepsbelowinordertoperformtheinstallationofyournew

SY-6IEM

Mainboard.

Step 1. Install the CPU

Mark your CPU Frequency:

RecordtheworkingfrequencyofyourCPUthat

shouldbeclearlymarkedontheCPU coverorwriteyourowncombinationinthespaceprovided.

233MHz (66 x 3.5) 300MHz (66 x 4.5) 366MHz (66 x 5.5)

266MHz (66 x 4.0) 333MHz (66 x 5.0) MHz ( x )

CPU Mount Procedure:

TomountthePentium

IIprocessorthatyouhave

purchasedseparately,followthese instructions.

Unpack the Retention Kit 2

Position the Mainboard 3

Insert the Screws

Install the Supporting Base

Install the Retention Clip 6

Install the CPU

Install the Support Clip 8

Insert the Latches 9

Remember to connect the

CPU Cooling Fan to the

CPUFAN power connector

on the mainboard.

Supporting Base

Support Clip

Screws (x2)

Retention Clip

Latches (x2)

ATX Power

CPUFAN Power

Heat Sink

Slot 1

Larger Pin-hole

SY-6IEM

Quick Start Guide

Hardware

Installation

Step 2. Make Connections to the Mainboard

Thissectiontellshowtoconnectinternalperipheralsandpowersupplytothe mainboard.

InternalperipheralsincludeIDEdevices(HDD,CD-ROM),FloppyDiskDrive,ChassisFan,

FrontPanelDevices(TurboLED,InternalSpeaker,ResetButton,IDELED,and KeyLock

Switch.),Wake-On-LANcard,VGAcard,SoundCard,andotherdevices.

FormoredetailsonhowtoconnectinternalandexternalperipheralstoyournewSY-6IEM

Mainboard,pleasereferto SY-6IEM MainboardUser'sGuideandTechnicalReference

onlinemanualonCD-ROM.

Connectors and Plug-ins

PCI Audio Card Header: SB-Link™(PC-PCI) Wake-On-LAN Header: JP44

Connect the SB-Link™(PC-PCI) cable from your

PCI audio card to this header. Connect the WOL cable from

your LAN card to JP44.

CPU Cooling Fan: CPUFAN Chassis Fan: CHAFAN

Connect the CPU cooling fan cable to the

CPUFAN power connector. Connect the case cooling fan cable to the

CHAFAN power connector.

USB TB LED SPK

Plug your USB devices

to this header. Connect your Turbo LED

cable to this header. Connect the speaker cable to

this header.

RESET IDE LED KB-LOCK

Connect the reset button

to this header. Connect the IDE device

LED to this header. Connect the Power LED and the

KB Lock switch to this header.

CD Line-in: J2, J3 Pin 1 Pin 2 Pin 3 Pin 4

J2 RG G L

Connect the CD Line-in cord from the CD-ROM

device to the matching header J2 or J3. J3 RGLG

IrDA (Infrared Device Header): IR

Connect the cable from your IrDA device to this header.

ATX Power On/Off: PWRBT ATX Power Supply: ATX PW

Connect your power switch to this

header (momentary switch type).

To turn off the system,

please press this switch and

hold down for longer than

4 seconds.

Attach the ATX Power cable to this connector.

When using the Power-On by PS/2 Keyboard

function, please make sure the ATX power

supply can take at least 720mA load on the 5V

Standby lead (5VSB) to meet the standard ATX

specifications.

SY-6IEM

Quick Start Guide

Hardware

Installation

Step 3. Configure Memory

YourboardcomeswithtwoDIMMsockets,providingsupportforupto256MBofmain

memoryusingDIMMmodulesfrom8MBto128MBwithnorestrictiononmemory

configuration.Therefore,youcaninstallmemorymodulesinanycombination.

Memory Configuration

DIMM Banks

MEMORY

CONFIGURATION DIMM 1 DIMM 2

RAM Type EDO/SDRAM EDO/SDRAM

RAM Module Size (MB) 8/16/32/64/128 8/16/32/64/128

Note : There are two types of EDO DIMM modules with different operating voltages:

3.3V and 5.0V. Please note that only 3.3V EDO DIMM modules can be used

on this mainboard.

Step 4. Set the CPU Frequency

YoudonotneedtosetanyjumperfortheCPUfrequency.Instead,CPUsettingsare

changedthroughtheBIOS

[SOYOCOMBO SETUP].

PleaserefertoChapter3-Quick

BIOSSetupfordetailsonhowtosetthePentium

IIprocessorfrequency.

Step 5. Enable/Disable Power-On by PS/2 Keyboard (JP1)

YoucanchoosetoenablethePower-OnbyPS/2Keyboardfunctionbyshortingpin1-2on

jumperJP1,otherwise,shortpin2-3todisablethisfunction.

Support Power-On

by Keyboard Enable Disable

JP1 Setting Enable Power-On

by PS/2 Keyboard

function

(short pin 1-2)

Disable Power-On

by PS/2 Keyboard

function

(short pin 2-3)

Important: When using the Power-On by PS/2 Keyboard function, please make sure

the ATX power supply can take at least 720mA load on the 5V Standby lead (5VSB) to

meet the standard ATX specifications.

SY-6IEM

Quick Start Guide

Hardware

Installation

Step 6. Enable/Disable Onboard Sound (JP2)

Theonboardaudiofeaturesofyour mainboardarecontrolledbyjumperJP2.Youcan

choosetoenableordisabletheavailablesoundfunctionbysettingJP2accordingly.

Shortpin2-3onjumperJP2toenabletheonboardsoundfunction.Then,youcanplug

yourexternalaudiodevicessuchasamplified-speakers, CD-player,andmicrophone

tothemainboardLine-out,Line-inand Mic portsright afterthe mainboardisinstalled.

(Youdonotneedtoinstallanysoundcard.)

Todisabletheonboardsoundoptionsshortpin1-2onjumperJP2.

Onboard Sound Enable Disable

JP2 Setting Short pin 2-3 to

enable the onboard

sound function.

Short pin 1-2 to

disable the onboard

sound function.

Step 7. Clear CMOS Data (JP5)

CleartheCMOSmemorybymomentarilyshortingpin2-3onjumperJP5foratleast5

seconds,andthenbyshortingpin1-2toretainnewsettings. Thisjumpercanbeeasily

identifiedbyitswhitecoloredcap.

CMOS Clearing Retain CMOS Data Clear CMOS Data

JP5 Setting Short pin 1-2 to retain

the new settings. Short pin 2-3 for

at least 5 seconds

to clear the CMOS.

Note: You must unplug the ATX power cable from the ATX power connector when

performing the CMOS Clear operation.

SY-6IEM

Quick Start Guide

Quick BIOS

Setup

Quick BIOS Setup

ThismainboarddoesnotuseanyhardwarejumperstosettheCPUfrequency.Instead,

CPUsettingsaresoftwareconfigurablewiththeBIOS

[SOYO COMBO SETUP].

The

[SOYOCOMBOSETUP]menucombinesthemainCPUparametersthatyouneedto

configure,allinonemenu,foraquicksetupinBIOS.

Afterthehardwareinstallationiscomplete,turnthepower switchon, thenpressthe

<DEL>

key

duringthesystemdiagnostic checksto entertheAwardBIOSSetupprogram.TheCMOS

SETUPUTILITYwilldisplayonscreen.Then,followthese stepsto configuretheCPUsettings.

Step 1. Select [LOAD SETUP DEFAULT]

Selectthe“LOADSETUPDEFAULT”menuandtype “Y”attheprompttoloadtheBIOS

optimalsetup.

Step 2. Select [STANDARD CMOS SETUP]

Set[Date/Time]and[Floppydrivetype],thenset[HardDisk Type]to “Auto”.

Step 3. Select [SOYO COMBO SETUP]

Movethecursortothe

[CPUSpeed]

fieldtosettheCPUworkingspeed.

Available[CPUSpeed]settingsonyourSY-6IEM Mainboardaredetailedinthefollowing

table.Ifyousetthisfieldto[Manual],youarethenrequiredtofillinthenexttwoconsecutive

fields:(1)theCPURatio,and(2)theCPUFrequency.

CPU Speed

233MHz(66x3.5) 333MHz (66x5.0)

266MHz(66x4.0) 366MHz (66x5.5)

300MHz(66x4.5) MHz( x )

Select the working frequency of your

Pentium®

II processor among these

preset values.

Note: Mark the checkbox that

corresponds to the working frequency of

your Pentium®

II processor in case the

CMOS configuration should be lost.

You can also write your own frequency

combination in the space provided.

Step 4. Select [SAVE & EXIT SETUP]

Press

<Enter>

tosavethenewconfigurationtotheCMOSmemory,andcontinuetheboot

sequence.

Inhaltsverzeichnis

Andere SOYO Hauptplatine Handbücher

SOYO

SOYO SY-P4X400 DRAGON Lite Bedienungsanleitung

SOYO

SOYO SY-KT400 Dragon Ultra Bedienungsanleitung

SOYO

SOYO SY-7ISA plus Bedienungsanleitung

SOYO

SOYO 82440 FX Bedienungsanleitung

SOYO

SOYO 5EA5 Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-6IEB Bedienungsanleitung

SOYO

SOYO SY-5EMM Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-P4I845PE Bedienungsanleitung

SOYO

SOYO SY-P4X400 DRAGON Lite Bedienungsanleitung

SOYO

SOYO SY-7VCA Bedienungsanleitung

SOYO

SOYO Mainboard SY-5S Bedienungsanleitung

SOYO

SOYO SC-6TBxE Bedienungsanleitung

SOYO

SOYO SY-6BE Bedienungsanleitung

SOYO

SOYO SY-7VBA 133 Bedienungsanleitung

SOYO

SOYO SY-6BE Bedienungsanleitung

SOYO

SOYO SY-7VCM Bedienungsanleitung

SOYO

SOYO SY-7VMA-B Bedienungsanleitung

SOYO

SOYO SY-7IZB Bedienungsanleitung

SOYO

SOYO SY-6BB V1.0 Bedienungsanleitung

SOYO

SOYO SY-P4I875P DRAGON 2 V1.0 Bedienungsanleitung

SOYO

SOYO 82430 TX P54C Gebrauchs- und Pflegehandbuch

SOYO

SOYO SY-D6IBA2 Bedienungsanleitung

SOYO

SOYO 80486 Bedienungsanleitung

SOYO

SOYO SY-K7VTA PRO Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung