Speco HT-7815DNV Bedienungsanleitung
HT7815DNV (Grey Housing)
HT7815DNVW (White Housing)
HT7915DNV (Grey Housing)
HT7915DNVW (White Housing)
560 Line Color Bullet Camera
Weatherproof, Day/Night High Resolution
Wall & Ceiling Mountable
Please read this manual thoroughly before operation and keep
it handy for further reference.
WARNING & CAUTION
DO NOT use power sources other than that specified.______
The lighting flash with an arrowhead symbol, within an equilateral triangle is
Intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons____________________________________
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (serving) instructions
in the literature accompanying the appliance__________________
INFORMATION -This equipment has been tested and found to company with
limits for a class a digital device Pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
Interference When the equipments operated in a commercial environment.
This equipment generates, uses, and Can Radiate radio frequency energy and
if not installed and used in accordance with the instruction manual, may Cause
Harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which
Case the user will be required to correct the interference at his own expense.
WARNING – Change or modification not expressly approved by the manufacturer could void
the user’s authority to operate the equipment__________________________________
CAUTION : To prevent electric shock and risk of fire hazards.
DO NOT expose this appliance to rain or moisture.000
This installation should be made by a qualified service person and should conform to all local codes.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL._______________
CAUTION
2
CONTENTS
Package Contents 4
Precautions 5
3
14
16
Specifications
Features 6
LED Pattern 13
Dimensions
Camera Installation 7-12
15
Warranty
PACKAGE CONTENTS
Please make sure that the following items are included
in the package:
1 HT7815 (7915) Camera Series
4 Mounting Screws
1 Video test Connector
1 Wrench
Please leave this manual with the end-user for future
reference.
4
PRECAUTIONS
•THIS CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED
PERSONNEL
•TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE
PROPER POWER CABLE
•DO NOT CLEAN THE COVER WITH AN ABRAISIVE CLEANING
MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO
CLEAN THE COVER
•THERE ARE NO USER-SERVICEABLE PARTS INSIDE.
PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN
TO MAKE INITIAL ADJUSTMENTS
•PLEASE USE A UL APPROVED REGULATED 24 VOLT AC OR
12 VOLT DC POWER SUPPLY
•PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE
TO PREVENT FIRE OR ELECTRICAL SHOCK
•PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
SUPPORT THE WEIGHT OF THE CAMERA
•PLEASE HANDLE THIS CAMERA CAREFULLY:
- DON’T USE A STRONG OR ABRASIVE DETERGENT WHEN
CLEANING THE CAMERA.
- DON’T EXPOSE THE CAMERA TO DIRECT SUN
5
FEATURES
•1/3” SONY Super-Had HQ-1* CCD, 560TVL HQ-1 DSP
•External lens control of zoom and focus
•Split Glass Technology eliminates IR reflections
•48 Mini IR LEDS (150’ Range – HT7815DNV/W)
•24 IR LEDs + 6 Super IR LEDs (330’ Range – HT7915DNV/W)
•Mechanical day/night IR cut filter
•Lux level dip switch controls when the camera switches
into B/W Mode - CDS Sensor
•UTP function built-in for use with twisted pair wiring
in addition to standard coax
•Day/night DC Varifocal auto iris lens (2.8 ~ 12mm)
•Video test connector for easy installation
•Dual voltage operation
•Weatherproof sunshield
•Built-in heater extends operating range
and eliminates condensation
•Easy access bottom panel controls (BLC, ELC, F/L, L/L)
•Insulated mount reduces ground loops
•Cable runs through the mount for protection
6
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500 mA)
2. WHEN USING 24 VOLTS AC (40 Volt Amps)
3. CONNECT VIDEO CABLE
-Connect BNC Cable To The BNC Jack.
4. UTP OUTPUT
-Allows use of the camera with Cat-5E or UTP cable.
A Receiving Balun must be used on the monitor side.
Please see our model VID-UTP
DC 12V Power Supply
Power Input :RED
Center : (+)
BLACK:(-)
RED(+)
Power Supply
AC 24V
UTP –
UTP +
UTP -
UTP +
7
CAMERA INSTALLATION
1.V-Phase Down
3.DC Lens Level
1.V-Phase Up
Bottom Controller Details
2.LED Level
4.Video Test
5.Function
6.LUX Level
1. V-Phase Level (UP/Down)
When desired, the vertical phase may be adjusted to synchronize the
vertical phase of the camera with other cameras in the system.
This feature is only available in 24 Volt AC operation
2.LED Level
Adjust the LED brightness
3.DC Lens Level
Fine tune the Auto IRIS Lens
4.Video Test Connector
Allows the connection of a Local Monitor to make initial adjustments
to the camera
8
CAMERA INSTALLATION
9
* DIP SWITCH
1234
ON
(1)ELC
(2)BLC
(3)F/L
(4)L/L
OFF
5.Function
(1) ELC- Electronic Light Compensation
ON : Camera is in Electronic Shutter Mode
OFF: Electronic Shutter is fixed at 1/60 and Auto Iris mode
is active
(2) BLC-Back Light Compensation.
BLC: If there is a strong light behind an object
the object may appear as a shadow.
Activating the BLC will minimize this effect.
The Coverage of the BLC is center plus bottom.
(3) F/L- Flicker-Less
ON : Use when the LUX changes often
OFF: Use under normal circumstances
(4) L/L- Line Lock
Locks the camera to the 60 Hz of the wall outlet.
Only operates in the 24 Volt AC mode
CAMERA INSTALLATION
10
6. LUX DIP SWITCH
1234
ON
#2 STEP - The camera will switch at 1 lux
OFF
:Tells the camera when to switch to the B/W night mode.
: Only one switch can be in the “on”position at a time.
#3 STEP - The camera will switch at 3 lux
#4 STEP - The camera will switch at 5 lux
#1 STEP - The camera will switch at 1/2 lux
- Loosen the fixed screws in each ring of Focus & Zoom
properly and adjust zoom or focus ring to take a right
picture and then fix the set screw again.
- Be careful of not putting too much strength when adjustment.
VIDEO COLOR CCD CAMERA
FOCUS CONTROLLER
ZOOM CONTROLLER
Zoom & Focus Adjustment
Andere Handbücher für HT-7815DNV
2
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Speco Sicherheitskamera Handbücher
Speco
Speco WDRB1 Bedienungsanleitung
Speco
Speco O4BM Bedienungsanleitung
Speco
Speco O2D7M Bedienungsanleitung
Speco
Speco O4iD1 Bedienungsanleitung
Speco
Speco CVC6146SCSFF Bedienungsanleitung
Speco
Speco CVC-614C Bedienungsanleitung
Speco
Speco HD1B316 Bedienungsanleitung
Speco
Speco INTENSIFIER HTINTB10 Bedienungsanleitung
Speco
Speco IP-INTB1 Bedienungsanleitung
Speco
Speco Bullet2 HT-B10X Bedienungsanleitung
Speco
Speco VIP2B1M Bedienungsanleitung
Speco
Speco CVCM6DC Bedienungsanleitung
Speco
Speco ONSIP 02T5 Bedienungsanleitung
Speco
Speco CVC-7705DNV Bedienungsanleitung
Speco
Speco CVC-770PH Bedienungsanleitung
Speco
Speco Flexible Intensifier O8FD4M Bedienungsanleitung
Speco
Speco HT7040H Bedienungsanleitung
Speco
Speco O8D8 Bedienungsanleitung
Speco
Speco CVC-607EXCM25 Bedienungsanleitung
Speco
Speco PROVIDEO CVC-627 Bedienungsanleitung
