Speco VLT7 Bedienungsanleitung

Thank you for purchasing our product. Speco Technologies is constantly developing and

improving products. We reserve the right to modify product design and specifications

without notice and without incurring any obligation.

VLB5 /VLB6/VLD5/VLD6M/VLT7

User Manual

Warnings

■ If the product does not work properly, please contact the dealer or where the product was purchased. Speco

Technologies is not responsible for any problems caused by improper operation or repair.

■ Do not expose the unit to heavy stress, violent vibration or long-term exposure to water and humidity during

transportation, storage, and/or installation.

■ Do not install near sources of heat.

■ Only install the product in environments inside the specification operating temperature and humidity range.

■ Do not install the camera near power lines, radar equipment or other electromagnetic radiation.

■ Do not block any ventilation openings if any.

■ Use all the weatherproofing hardware requirement to minimize weather intrusion.

sensitivity, low noise and distortion and supports HD video transmission with the common coaxial cable,

ensuring the requirement of the HD monitoring in the traditional surveillance system.

This camera series is the latest technology and advanced circuit design, which features high definition and

Introduction

● High Resolution

Adopt high performance sensor, providing high definition and clear image.

● High Transmission Performance

Real-time transmission with high speed and long distance.

● DNR

Reduce noise from brightness and color signal.

● OSD

Access the camera settings which can be clearly displayed through the main menu.

● White Balance

Adjust the color temperature according to the environment automatically.

● ICR Auto Switch

The filter will filter infrared light during the daytime and change to normal at night to

ensure a high sensitivity and clear image.

● AGC

Adjust the gain of amplifier, enabling the camera to output the standard video signal in different

lighting condition.

● Wide Dynamic Range (WDR)

When there are both very bright and very dark areas simultaneously in the field of view, this function

will balance the brightness level and provide clear images.

● Backlight Compensation (BLC)

When the back of the captured object is too much bright, you can set BLC for the captured object to

make it clearer.

Cables

Power Cable

Video Output

Video Switch Cable

Video Switch: Four video output modes can be optional--AHD, TVI, CVI and CVBS

(a) remove the cover of the video switch cable; (b) hold and press the button in the video

switch cable for 5 seconds to switch the current video output.

Before you start, please make sure that the wall or ceiling is strong enough to withstand three times

the weight of the camera. Please install and use the camera in the dry environment.

You’d better install back the lens cover or lower dome less than 4 hours after removing it.

The mounting types of cameras are only for reference.

Installation

►Mounting for VLB5/VLB6

1. Drill the screw holes and the cable hole on the wall according to the drill template.

VLB6

48mm

∅4.5

VLB5

∅4.6

48mm

Focus

Zoom

Cover

2. Route and connect the cables .

3. Secure the mounting base with camera to the wall with screws as shown below.

4. Bracket adjustment. Before adjustment, preview the image of the camera on a monitor and then loosen the

fixed ring to adjust the view angle of the camera. Tighten the fixed ring after the adjustment.

5. Focus and zoom adjustment ( If the camera you get is fixed lens, please skip this step). Open the cover

of the camera then adjust the focus and zoom screws to get a clear image. Finally, install the cover

back to the camera.

►Mounting for Dome Camera

and the cable hole on the wall according to the drill template.

Attach the drill template to the place where you want to fix the camera and then drill the screw holes

●Mounting for VLD5/VLD6M

Fixed Ring

Pan 360°

Tilt 80°

Rubber plug

90° Tilt

360° Rotation 360° Pan

Fixed Ring

VLB6

VLB5

Trim ring

74.3

(mm)

2. Rotate the trim ring anticlockwise to remove it from the camera.

3. Loosen the screws to open the lower dome. Then route and connect the cables.

4. Secure the camera to the wall with screws provided as shown below.

∅4.6

90.2mm

VLD5

VLD6M

Rubber plug

Lower dome

* Install it when routing the

cables through the ceiling.

5. Three-axis adjustment. Before adjustment, preview the image of the camera on a monitor and then

adjust the camera according to the figure below to get an optimum angle.

Rotation 0°~355°

Pan 0°~355°

Tilt 0°~67°

Turn

Rotation 0°~345°

Tilt 0°~77°

Pan 0°~345°

6. Install the lower dome back to the camera and fix it with screws. Then put the trim ring onto the lower dome

and then rotate it clockwise until it is locked. Finally, remove the protection film softly.

Trim ring

●Mounting for VLT7

1. Loosen the set screw to disassemble the camera.

Set Screw

Mounting Base

Enclosure

Camera Unit

and then d

the drill template.

3. Route and connect the cables. Then secure the mounting base to the

ceiling or wall with the screws provided.

Attach the drill template to the place where you want to fix the camera

rill the screw holes and the cable hole on the wall according to

(mm)

Ø4.5

Ø51.0

Ø91.6

44.2

38.2

the dome to obtain an optimum view angle.

Install the camera unit and enclosure to the mounting base and then adjust

Tilt: 75°

Pan: 360°

5. Finally, secure the camera with the set screw.

Specifications

Camera

Image Sensor

Resolution

Image size

Video Output

Image System

Electronic Shutter

IR Distance (feet)

Frame Rate

Min. Illumination

Lens Mount

S/N Ratio

Ingress Protection

Functions

Function Control

Day &Night

WDR

Digital NR

AGC

Auto White Balance

Front Light Compensation

Defog

HLC

Sharpness

Mirror

Smart IR

Image Setting

Defect Correction

Others

Power Supply

Power Consumption

Working Environment

Dimensions (inch)

1/2.9" CM S

2MP

1920×1080

AHD/TVI/CVI/CVBS (*camera comes defaulted to HD-TVI)

PAL/NTSC

Auto; 1/50s~1/100000s(PAL);1/60s~1/100000s (NTSC)

~164.0

30fps(60Hz),25fps(50Hz)

Color:0.001lux@F1.2, AGC ON; B/W: 0lux with IR

M12 D14

65.6~98.4 98.4 32.8~65.6 65.6~98.4 65.6~98.4

M12 D14 M12

≥

× ×

52dB(AGC OFF)

IP67 IP67 IP67&IK10 IP67&IK10 IP67

OSD (UTC control)

ICR

Yes (digital WDR)

Yes

Auto

DC12V (± 10%)

IR OFF: < 1W; IR ON : < 3.5W

-4 °F ~ 122 °F, 10 % ~ 90 %(relative humidity)

6.6 2.9 2.9

Specifications

Models VLB5 VLB6 VLD5 VLD6MVLT7

Ф3.7 3.3×

Ф5.6 3.9×

Ф4.7 3.5×

8.6 3.2× ×3.2

2.8~12mm

2.8mm

Lens (motorized)

2.8mm 2.8mm

(varifocal)

2.8~12mm

120dB

No Yes Yes Yes

DC12V (± 15%)

Model: VLB5 /VLB6/VLD5/VLD6M/VLT7

Federal Communications Commission (FCC) Statements

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) This device must accept any

interference received, including interference that may cause

undesired operation.

FCC Responsible Party:

Speco Technologies

200 New Highway

Amityville, NY 11701

www.specotech.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Speco Sicherheitskamera Handbücher

Speco

Speco O4VT1M Bedienungsanleitung

Speco

Speco H4FB1 Bedienungsanleitung

Speco

Speco VLEDT2W Series Bedienungsanleitung

Speco

Speco O8FD1 Bedienungsanleitung

Speco

Speco O2VB1 Bedienungsanleitung

Speco

Speco x20 HD-SDI PTZ Outdoor Bedienungsanleitung

Speco

Speco VL-262SD Bedienungsanleitung

Speco

Speco HTFB2TM Bedienungsanleitung

Speco

Speco WIDE DYNAMIC RANGE CVC624WDR Bedienungsanleitung

Speco

Speco Intensifier K Glacier Series Bedienungsanleitung

Speco

Speco O84S Bedienungsanleitung

Speco

Speco O4FB2M Bedienungsanleitung

Speco

Speco CVC-647TP Bedienungsanleitung

Speco

Speco O8D2M Bedienungsanleitung

Speco

Speco O4B6N Bedienungsanleitung

Speco

Speco INTENSIFIER3 CVC6246IHR Bedienungsanleitung

Speco

Speco 650Line Intensifier3 HTINTB8G Bedienungsanleitung

Speco

Speco HTB11FFi Bedienungsanleitung

Speco

Speco O4LB1 Bedienungsanleitung

Speco

Speco VL12 Bedienungsanleitung

Speco

Speco ZIP2B Installationsanleitung

Speco

Speco ONSIP O2T6 Bedienungsanleitung

Speco

Speco CVC-627M Bedienungsanleitung

Speco

Speco ONSIP 02T5 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung