Spectra KT2007 Bedienungsanleitung

COMPACT DISC + GRAPHICS KARAOKE SYSTEM

USER MANUAL

KT2007

CAUTION: Electrically Operated Product - Please use care when

plugging AC Adaptor into AC outlet.

COMPLIANCE WITH FCC REGULATIONS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION : Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

CAUTION

CLASS 1 LASER PRODUCT

APPAREIL LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

This product contains a low power laser device.

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN AND INTERLOCKS

DEFEATED.

AVOID EXPOSURE TO BEAM

Follow the advice below for safe operations.

ON PROTECTION AGAINST LASER ENERGY EXPOSURE

•As the laser beam used in this compact disc player is harmful to the eyes, do not

attempt to disassemble the casing.

•Stop operation immediately if any liquid or solid object should fall into the cabinet.

•Do not touch the lens or poke at it. If you do, you may damage the lens and the player

may not operate properly.

•Do not put anything in the safety slot. If you do, the laser diode will be “ON” when the

CD door is still open.

•If the unit is not to be used for a long period of time, make sure that all power

sources are disconnected from the unit. Remove all batteries from the battery

compartment, and unplug the AC cord from the wall outlet. Make it a practice to

remove the AC cord by grasping the main body and not by pulling the cord.

•This unit employs a laser. The use of controls or adjustment or performance of

procedures other than those specified here may result in exposure to hazardous

radiation.

ON PLACEMENT

•Do not use the unit in places which are extremely hot,cold, dusty or humid.

•Place the unit on a flat and even surface.

•Do not restrict the air flow of the unit by placing it in a place with poor ventilation, by

covering it with a cloth or by placing it on a carpet.

ON CONDENSATION

•When left in a heated room where it is warm and damp, water droplets or

condensation may form inside the unit.

•When there is condensation inside the unit, the unit may not function normally.

•Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room

up and dry the unit before use.

Should any trouble occur, remove the power source and refer servicing to qualified

personnel.

PROTECT YOUR FURNITURE!!

This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving

when you operate the controls. These ‘feet’ are made from non-migrating rubber material

specially formulated to avoid leaving any marks or stains on your furniture. However

certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may

cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on the furniture.

To prevent any damage to your furniture we strongly recommend that you purchase small

self-adhesive felt pads, available at hardware stores and home improvement centers

everywhere, and apply these pads to the bottom of the rubber ‘feet’ before you place the

product on fine wooden furniture.

GLOSSARY OF KARAOKE

In additional to all of the terminology associated with consumer electronics products, a

few additional terms are used almost exclusively in karaoke. These terms are meant to

familiarize you with the world of karaoke. The features listed below may not necessarily

apply to the particular model that you have. Following are some brief explanations:

Echo:

Echo adds depth and resonance to a singer's voice, without affecting the music. This

echo is produced by creating minor controlled feedback in the singer's voice.

CDGMs (Compact Disc Plus Graphics Multiplex):

They are CD’s that contain songs that include the lead singer's voice, which can be

removed with a karaoke system that has a balance or multiplex control. The idea is to sing

along with the lead singer or replace the lead singer’s voice with yours. Background vocals

and backup singers are provided.

Automatic Voice Cancel (AVC):

When the AVC function is activated, the vocals on a multiplex recording are eliminated as

soon as the singer begins singing into the microphone. When the singer stops singing, the

vocals on the multiplex recording are automatically re-activated. This useful function is

used primarily during practice sessions while a singer is learning a song. Please note that

the AVC function only works with multiplex recordings and not with standard audio

recordings.

CD+G:

This is an acronym for Compact Disc plus Graphics. You will also see variations CD+G,

and CD+ Graphics. This is a regular CD with information stored on a data track

simultaneous to music. CDG has a video output for simple graphics (not full motion video).

In the case of karaoke, the graphics function is used to store song lyrics, and display the

lyrics in sync with music. In most cases, CDG software displayed lyrics change color as

they are to be sung. A regular television with a Video In RCA Jack is all that required to

display CDG lyrics.

INTRODUCTION

Your Compact Disc + Graphics Karaoke System will provide you with many years of fun

and entertainment. It can let you be the "star" as yousing along with your favorite karaoke

discs and hear your voice with the music through the system's speakers.

This Karaoke System has a compact design and is full of features yet it is easy to use.

Just a few simple instructions and you will become an expert.

Before you use your unit, please glance through this manual to familiarize yourself with all

the features available and the sections of the manual that describe their operation. Next

go to the section for the specific operation you wish to perform.

For your easy reference, listed here are some of the main features of this Karaoke

System.

Lyrics on TV screen - displays the lyrics with the tempo of music when playing CD+G

discs.

Automatic Voice Control - lets you replace the original singer's voice with your own

voice when any pre-recorded multiplex karaoke disc is played. To activate, just rotate the

Mic Volume to a comfortable listening level and Auto Voice Control for the best balance

between playback and microphone levels.

Balance Control - lets you adjust the balance between the pre-recorded original singer's

voice and the music if you use a multiplex karaoke disc.

Echo Control - lets you add an echo to enrich your voice for a concert hall effect.

Built-in Speakers - lets you share the music with your family or friends.

Audio Out Jacks - lets you connect another audio output component, such as an

equalizer/booster or a PA system.

Video Out Jacks - lets you connect to your TV for displaying the lyrics.

FRONT VIEW

CD DOOR

PLAY/PAUSE indicator

REPEAT indicator

PROGRAM indicator

LED display

SPEAKER (Left side)

MIC 1 Jack

MIC 2 Jack

VIDEO CAMERA

CDG indicator

SPEAKER (Right side)

AUX IN Jack

BACK VIEW

VIDEO OUT

AUDIO OUT (R)

DC IN Jack

AUDIO OUT (L)

CONTROL LOCATIONS

CONTROL Panel

VIDEO select

MASTER VOLUME Knob

BALANCE Knob

POWER ON/OFF button

POWER indicator

STOP button

REPEAT button

MIC VOLUME knob

ECHO knob

AUTO VOICE CONTROL button

PLAY / PAUSE button

SKIP buttons

PROGRAM button

MAIN OPERATION

Plug the supplied AC adapter into the DC jack on

the side of the unit and connect to a standard AC

wall socket.

Connecting Power

Note: When the unit is not operated for long

periods of time, unplug the AC adapter from the

unit and wall outlet.

The karaoke system provides a patch cord to

give you the option of connecting your unit to an

external audio/video device. The patch cord has

three RCA jacks at each end. White and Red

are for left and right audio connections and the

Yellow is for video. Modern flat panel digital TV

sets and home music systems are usually

equipped with corresponding color-coded RCA

jacks to assist correct connections. Make sure

that you have a CD+G disc in the karaoke

system playing when you are making this

connection. You will know you have the proper

settings on your TV as soon as you see the lyrics on the screen.

Connecting to your TV

AC WALL

SOCKET

AC ADAPTER

AC 100-240V

50/60Hz

TO DC jack

(DC 10.5V 0.8A)

VIDEO

INPUT

AUDIO

INPUT

REAR VIEW OF TV

TO VIDEO INPUT OF TV

VIDEO OUT

(YELLOW JACK)

Please follow the steps below to display CD+G lyrics on the TV screen:

(1) Locate the color-coded patch cords.

(2) Connect video cable (Yellow) to the VIDEO OUT on the back of the karaoke

system.

(3) Connect the other end of the video cable (Yellow) to the VIDEO/AV INPUT on your

TV.

If your television does not have the required Video Input, you will need a RF modulator

(Radio Frequency Modulator), which connects through your TV Antenna or cable line and

serves as your Video Input.

The RF Modulator can be purchased at almost any consumer electronics retailer. If you

are connecting the video from the karaoke system to a television video input jack, you

must specify the source the TV is to display. Your TV user guide can tell you how to

display the video signal from the 'Video In' jack.

If you don't have the manual for your TV we suggest calling the TV manufacturer's

customer service department. Only the manufacturer will be able to tell you accurately

how to configure your TV to display the video signal coming from the 'Video Input' jack.

Note: Some projection TV sets do not properly display the standard blue background

used on most CDGs. If the background color is inconsistent or flashing, please try

connecting your karaoke system to a standard CRT/LCD television.

Video connection

•You karaoke system is designed to connect to your TV. The karaoke system is

constantly sending the video and audio signals to the 'VIDEO OUT' and 'AUDIO

OUT' jacks whenever you play a CD+G disc. So, load a CD+G into your karaoke

system before you start making these connections. You will see lyrics on the TV

screen as soon as you have completed the setup correctly.

Common ways to configure your TV

•The setup of your TV is the most difficult part of making the connection for

displaying your lyrics. In most homes, the TV has either a cable connected or

antenna in use. Once you connect your karaoke system to the TV, you must 'tell'

your TV to display the input from the karaoke system instead of the usual input from

the cable or antenna.

•Check your TV user manual for the easiest way to setup your particular

entertainment system. If you don't have your manual you can always call your TV

manufacturer for that information or try their website for online assistance. We've

listed below the most common ways of setting up a TV:

(1) In the setup menu for configuring the TV there may be an 'Input Selection'

option where you may choose between 'Cable/Ant.', 'Video 1', or 'Video 2' etc.

as the input source.

(2) Try looking for a 'Video' channel between the highest channel and the lowest

channel on your TV (i.e. Between 99 and 2 may be 'VIDEO' or 'INPUT')

(3) Look for a button on the remote control for the TV you are connecting to that

says 'VIDEO', 'VIDEO 1', 'AUX', 'EXT', 'LINE 1. The 'LINE-IN' button will

display the Video input source.

VIDEO

INPUT

AUDIO

INPUT

Connect the unit to your TV or home stereo

system using the White and Red connections

on the supplied patch cord. Plug the white end

of the patch cord into the white AUDIO OUT

jack on the unit. Plug the red end of the patch

cord into the red AUDIO OUT jack on unit. Now

connect the other end of the cable's white (left

channel) and red (right channel) plugs to your

TV or home stereo system's 'AUDIO IN' or

'AUX IN' jacks.

Audio connection

CD OR CD+G OPERATION

WARNING - Tapping or dropping the microphone while it is on can permanently damage

your microphone. Do not swing the microphone around by the cord.

This unit is CD-R/CD-RW compatible but playback capability may vary depending on the

quality of the disc, the recording device and application software.

NOTE: This unit is designed to play CDs bearing the identification logo

ABOUT THE CD-R/CD-RW DISCS

or . If

CDs do not conform to the CD standard, they may not play properly.

•Do not press the door of the CD compartment while it is playing.

CD or CD+G OPERATION

•Never place anything except a compact disc in the disc tray. Foreign objects can

damage the unit.

•Do not apply excessive force to disc cover.

•Only place one disc in the tray at a time.

REAR VIEW OF TV

TO AUDIO JACKS OF TV

AUDIO OUTPUT

(WHITE JACK FOR LEFT CHANNEL

RED JACK FOR RIGHT CHANNEL)

TURNING POWER ON/OFF

(1) Press the POWER button switch on the Karaoke system, the POWER indicator will

light up.

(2) Press the POWER button again to switch off the system, the POWER indicator will

be off.

VIDEO SELECT

Set the VIDEO select to CDG.

LOADING A DISC

(1) Grip the specific points on the CD Door where indicated by the

removable label and pull gently to open it.

(2) Load a disc into the compartment with the printed side facing you.

(3) Gently close the CD DOOR. The karaoke system begins to read

the disc. The LED display will display the total number of tracks.

(4) Press PLAY/PAUSE button to play CD. (If no disc is loaded, " -- "

will be displayed).

PLAY/PAUSE MODE

(1) To start playing, press the PLAY/PAUSE button once, the first track [1] will be

displayed and the PLAY/PAUSE indicator will light. (If a CD+G disc is detected, the

CDG indicator will also turn on).

(2) To temporarily stop playing, press the PLAY/PAUSE button, the PLAY/PAUSE

indicator will flash.

(3) To resume play, press PLAY/PAUSE button again.

STOP MODE

If the STOP button is pressed in the course of playing, the disc will cease to play. The

total number of tracks will be shown on the LED display.

SKIP PLAY (For both CD and CD+G discs)

(1) In stop mode, you can skip up or down to a specific track number by pressing the

forward or back SKIP button.

(2) While the selected song track is flashing, press the PLAY/PAUSE button.

(3) During the PLAY mode, you can skip up or down to a specific track number by

pressing the forward or back SKIP button.

REPEAT PLAY (For CD and CD+G discs)

(1) To repeat the current track, press the REPEAT button once. The REPEAT indicator

will flash. The track will continue to play until the repeat function is turned off.

(2) To repeat all the tracks, press the REPEAT button twice, the REPEAT indicator will

light up steadily. All the tracks on the disc will be played repeatedly.

(3) To clear the repeat function, press the REPEAT button again, the REPEAT indicator

will turn off.

Inhaltsverzeichnis

Andere Spectra Spielzeug Handbücher

Spectra

Spectra Hello Kitty KT2009 Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken

marklin

marklin 37321 Bedienungsanleitung

Canon

Canon PAPER CRAFT Bedienungsanleitung

GREAT PLANES

GREAT PLANES Pitts M-12S Bedienungsanleitung

NOCH

NOCH 14261 Bedienungsanleitung

Hausler

Hausler 450 SE V2 Bedienungsanleitung

Dynaflite

Dynaflite Daydream Bedienungsanleitung

Kenner

Kenner Batman 63651 Bedienungsanleitung

LEGO

LEGO 8527 Bedienungsanleitung

Multiplex

Multiplex EasyStar II Bedienungsanleitung

iKarus

iKarus ECO 8 Bedienungsanleitung

Walkera

Walkera 38 Bedienungsanleitung

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Bedienungsanleitung

MD MXION SWD Bedienungsanleitung

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Bedienungsanleitung

marklin

marklin 39671 Bedienungsanleitung

LEGO

LEGO TECHNIC 8735 Bedienungsanleitung

Mattel

Mattel HOTWHEELS DWL04 Bedienungsanleitung

REVELL

REVELL Bristol Beaufighter TF.X Bedienungsanleitung