Spinfire Pro 2 Bedienungsanleitung

Pro 2 Manual

Page 2 Manual Revision 4.1.9

TABLE OF CONTENTS

SAFETY WARNINGS ...................................................................................... 3

BEFORE FIRST USE ...................................................................................... 6

ASSEMBLY...................................................................................................... 6

Packaging ................................................................................................................. 7

BATTERY AND CHARGING............................................................................ 7

Internal Battery ......................................................................................................... 7

External Battery ........................................................................................................ 8

Standard Charger ..................................................................................................... 8

Optional Fast Charger .............................................................................................. 9

AC ADAPTOR .................................................................................................. 9

CUSTOMER CARE ......................................................................................... 9

Caution ..................................................................................................................... 9

Maintenance ........................................................................................................... 10

Storage ................................................................................................................... 10

TRANSPORTATION ...................................................................................... 10

USAGE .......................................................................................................... 11

CONTROL PANEL ......................................................................................... 12

REMOTE CONTROL ..................................................................................... 15

TENNIS BALLS .............................................................................................. 16

Low Compression Balls .......................................................................................... 16

HIDDEN FEATURES ..................................................................................... 17

Manual Mode .......................................................................................................... 17

Padel Software ....................................................................................................... 17

Ball Counter ............................................................................................................ 17

TROUBLESHOOTING ................................................................................... 17

SUBMITTING A SUPPORT REQUEST ......................................................... 17

WARRANTY .................................................................................................. 18

Warranty Administration ......................................................................................... 18

Not Covered ........................................................................................................... 18

Conditions of Warranty ........................................................................................... 18

EC DECLARATION OF CONFORMITY ........................................................ 19

FCC & ISED RSS WARNING: ....................................................................... 19

MANUFACTURER DETAILS ......................................................................... 20

Page 3 Manual Revision 4.1.9

SAFETY WARNINGS

This tennis ball machine is designed and tested to offer safe playing

conditions, provided it is operated in strict accordance with the

following safety warnings. Failure to comply with the following

instructions may result in serious personal injury or property damage.

WARNING!

• Keep clear of the ejection

point. Do not stand in front or

near the mouth of the machine.

Balls may eject unexpectedly.

• Keep young children away

from the machine when turned

on.

• Keep physically and mentally

impaired persons away from

the machine when turned on.

• Adult supervision is

recommended at all times.

MOVING PARTS

INSIDE!

• Do not insert body parts or

foreign objects into the mouth

of the machine. In the event of

a ball jam, the operator should

not put their hand or any foreign

object into the machine whilst it

is turned on. Injury could occur if

hands or clothing are caught in

the mechanisms. Always turn

the machine off in the event of a

jam or machine failure.

FINGER TRAP! • Do not insert your fingers or

hand into the carousel area

when the machine is on. The

machine must be turned off

when touching the carousel as it

presents a finger/hair/loose

clothing hazard.

• Do not fill or re-fill the

machine while it is firing

tennis balls.

DON’T USE IN

WET WEATHER!

• The machine should not be

used in wet conditions.

• The charger(s) & AC Adaptor

are only to be used indoors.

Page 4 Manual Revision 4.1.9

ELECTROCUTION! • Always use and store the

machine in a dry environment.

• Do not spray with water.

• If the battery charger or AC

adaptor is wet, do not pick it

up. If the battery charger or AC

adaptor is picked up when wet, a

person could be exposed to

hazardous voltages.

• Disconnect the machine from

any AC adaptor or battery

before making any repairs.

• If any power cables are

damaged, cease using them &

arrange a replacement.

• Connect any charger or AC

adaptor to 110 – 250V mains

power outlet installed by a

qualified electrical contractor

with suitable protection such

as an RCD.

BATTERY! If your machine has an internal or

external battery:

• Keep sparks and flames away

from the battery (i.e. no

smoking).

• Keep young children and

animals away from the battery.

• Do not use the battery if it has

swollen or expanded.

• Do not use the battery if any

liquid has escaped.

• Only use a 12V sealed lead

acid battery with this machine

(or alternative approved by

your distributor).

• When replacing the battery,

the terminals should be

wrapped with electrical tape or

a heat shrink sleeve.

HEAVY! • Practice correct lifting

techniques. The machine

weighs 24 kg / 54 lbs (2 person

lift) with an internal battery or 18

kg / 40 lbs (1 person lift) with an

external battery. The gross

weight of the packing box is 29

kg / 64 lbs (2 person lift).

Page 5 Manual Revision 4.1.9

FIRE HAZARD! • Keep your machine clean.

Contaminants such as dust &

leaves inside your machine

could present a burn hazard.

Please vacuum out your

machine from the mouth on a

regular basis.

• A multi-purpose/dry chemical

extinguisher should be used

to extinguish any flames.

EMERGENCY

STOP!

• The master switch is located

under the machine on the

right hand side. This switch

should be used to cut off power

to your machine in an

emergency. Set the rocker

switch to position “O” which is

the middle selection.

TENNIS AND

PADEL BALLS

ONLY!

• Only use tennis or padel balls

with this machine. Low

compression & pressureless

balls are acceptable too, as long

as they are the same size as a

standard tennis ball. Using other

balls such as cricket balls will

damage your machine and will

not be covered under warrant

Page 6 Manual Revision 4.1.9

BEFORE FIRST USE

When you first open your box, you may notice some cosmetic scratches on

your machine, particularly in the ball carousel pit at the top of the machine.

This is perfectly normal and part of the manufacturing process. You may also

notice some yellow ball fluff inside your machine or on the throwing wheels.

This is also normal as each machine is tested with balls as part of our quality

control process (wheels are wiped down afterwards, but it’s difficult to remove

all traces of ball fluff).

To protect the machine in transport, the internal pivot plate may have been

secured to prevent it from moving. Please remove any bolt(s) or cable tie(s)

prior to turning the machine on. You will normally find indicators (tags, stickers

or ribbons) helping you locate these before use, although sometimes they are

removed by the distributor during testing. If you receive a HCAL error when

you first turn on your machine, it is most likely because you have not correctly

completed this step. If your pivot plate was secured with a bolt, please keep

this with your box in case you need to ship the machine back for repair (it can

be re-inserted).

There is also a 3 position master power switch under the machine which is

turned off for transport. This will need to be turned on before you can power

on the machine (please turn this off after each use). The 3 positions are:

O Off

I Internal Batter

II External Batter

or AC Adapto

ASSEMBLY

To assemble your machine, first simply remove it from the box. To do this,

start by removing the hopper, followed by the machine. You can safely pick up

the machine by placing one hand inside the mouth at the front and using the

handle located at the rear of the machine above the control panel.

Page 7 Manual Revision 4.1.9

You should find this manual, a charger, remote and the carousel in the box. If

you have ordered an external battery, AC adaptor or fast charger, they may

also be in the box. The carousel is the white 5 fingered device which stirs the

balls when they are sitting in the hopper. You need to attach this to the top of

the machine on the rod, noting the flat side of the rod needs to align with the

hole in the carousel. If you cannot insert the carousel due to an obstruction,

you may need to turn the machine on and rotate the rod to find a suitable

location to attach the carousel. You can do this by pressing the Feed

Start/Pause button. Never bend the wire which floats above the drop hole, as

this can result in ball jams. It is also possible that the carousel may already be

attached when you receive your machine, so nothing will need to be done.

You can attach the hopper either upright for play mode, or upside down for

portability/storage (note you can remove the carousel too if you need to). To

attach the hopper, simply align it correctly and then push down on it until it

locks into place.

Hopper upside down for portability/storage

Packaging

We recommend you keep your box in case you need to ship your machine

back to the supplier at a future point in time.

BATTERY AND CHARGING

Your machine should last between 3-8 hours, depending on the settings you

are using.

The machine should arrive to you with some charge in the battery, however, if

you have time, we encourage you to charge the machine before its first use.

Internal Battery

If you have an internal battery, simply plug the charger into the charger jack

on the rear of the machine (swivel the jack cover to expose it) and plug the

other end into a wall socket. Any master switch position will work.

Your battery should be charged at least once per month, even if it has not

been used. This will maintain the life of the battery.

Page 8 Manual Revision 4.1.9

External Battery

If you’ve ordered your machine with an external battery, you have the

advantage of easily charging the battery separately from the machine (your

machine is also 6 kg (13 lbs) lighter than internal battery machines). Your

external battery has two plugs, one for connecting to the machine (male) and

the other is for connecting to the charger (female). Please do not connect

these together and always disconnect the battery from the machine when not

in use. There is no need to remove the battery from the bag while charging.

Your battery should be charged at least once per month, even if it has not

been used. This will maintain the life of the battery.

When replacing the battery, please wear protective glasses, clothes & gloves.

Please also use electrical tape or similar to cover the battery terminals after

installation. Do not smoke or keep the battery near a flame source. The

battery is completely sealed, but in the event of damage where acid is

exposed to the skin or eyes, rinse with water and visit your doctor. Avoid short

circuiting the battery so as not to cause a fire.

The external battery cable includes a 32V 15A fuse built into it (note: 32V is

correct for our 12V battery). If you are required to replace this, they can be

purchased from local electronic stores or your Spinfire distributor.

Standard Charger

Your machine comes with a standard charger which charges the machine

safely in 11 hours. This charger is the safest charger to use for your machine

and will provide the longest battery life. It is also a “smart” charger, meaning it

will not damage your battery if left on for long periods of time.

The charger has a red light when charging and a green light when charging is

complete. If after 11 or more hours, your charger light does not turn green,

please disconnect the charger and turn on your machine. If the battery bar

indicator shows 4 bars, then your machine is charged and ready to play. You

can ignore the light on the charger.

If the charger’s light flashes green, this can indicate that the charger itself is

faulty. However, we recommend you try charging your battery for 24 hours,

Page 9 Manual Revision 4.1.9

leaving the green light flashing. If within this 24 hours the green light stops

flashing, you will find it has restored itself and will function normally going

forward.

Your charger should only be used in a dry environment. As the charger itself

can get hot during charging, we recommend you position the machine and

transformer away from combustible items. This charger is only suitable for

sealed lead acid batteries.

Optional Fast Charger

The fast charger can charge your machine in 4 hours (instead of 11 with the

standard charger).The fast charger is a “smart” charger, meaning it will not

damage your battery if left on for long periods of time. However, as a

precautionary measure, we recommend you unplug the charger once

charging is complete. If after 4 or more hours, your charger light does not turn

green, please disconnect the charger and turn on your machine. If the battery

bar indicator shows 4 bars, then your machine is charged and ready to play.

You can ignore the light on the charger.

Please note, fast chargers reduce the lives of batteries slightly, so it is always

recommended to use the standard charger unless you have time constraints.

Your charger should only be used in a dry environment. As the charger itself

can get hot during charging, we recommend you position the machine and

transformer away from combustible items. This charger is only suitable for

sealed lead acid batteries.

AC ADAPTOR

The AC Adaptor is an optional accessory, but it can be used as your primary

power source (you can order a machine without any internal or external

battery). Simply plug the AC Adaptor into your machine and turn the master

switch to position II.

Note, if you do have an internal battery, the AC Adaptor can still be used. It

will not damage the internal battery.

Your AC Adaptor should only be used in a dry environment. The Spinfire AC

Adaptor has been tested to work perfectly with our machine and we do not

recommend substituting it with a compatible model. Please disconnect it from

the machine when not in use. If using an extension cord, please ensure it is a

good quality, thick cord, at least 16 gauge.

CUSTOMER CARE

Caution

This machine was designed to be used on a tennis court and in no other

circumstances. Only tennis balls must be used, no other balls should be

ejected from the machine. Never stand in front of the machine unless you are

on the other side of the net (more than 7 meters (8 yards) away). Even when

the machine is paused, never stand in front of it as balls can eject at any time.

Page 10 Manual Revision 4.1.9

Children should be supervised at all times and taught never to stand in front of

the machine.

Do not use the machine in rain and avoid using wet balls. We recommend the

use of pressureless balls to give your machine the best performance. Using a

combination of new and old balls will give inconsistent results.

Maintenance

You can vacuum out the inside of your machine to remove ball fluff. The

outside of the machine can be wiped down with a mild detergent, however,

please be careful not to get water inside the machine. The throwing wheels

should be wiped down after every use to prevent any buildup of residue from

the balls. If you play on a porous surface like clay or en tout cas, we

recommend you wipe the insides of your throwing wheels monthly (a build up

of clay can cause your wheels to become unbalanced).

Due to vibrations, the screws in the control panel and on the base of the

machine can become loose over time, so please check these regularly and

tighten them if required. If you do need to purchase replacement control panel

screws from the local hardware store, they are 304 Stainless Steel Phillips

Head screws, M4 x 10mm with a 9mm head diameter. You can contact your

local distributor for spares if you need them.

Storage

We recommend that your machine is stored inside/under cover in a dry

environment and preferably in a Spinfire cover to protect it from debris. Do not

leave your machine on court even with the protection of a cover as heavy rain

may damage your machine. Do not store your machine in direct sunlight or

inside a car (unless in shade) and always keep it upright. Safe storage

temperatures are -15°C to +50°C (5°F to 122°F). Extreme temperatures can

damage the machine circuitry and battery.

TRANSPORTATION

To transport the machine, simply slide out the handle at the front of the

machine (underneath). Lift the machine by the handle until it rests on the rear

wheels. Make sure that the machine is tilted enough not to drag on the bottom

of the machine. Simply pull the machine to your destination. Never move the

machine while it is on or if balls are in the hopper.

Andere Handbücher für Pro 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Spinfire Sport & Outdoor Handbücher

Spinfire

Spinfire Pro 2 Bedienungsanleitung

Beliebte Sport & Outdoor Handbücher anderer Marken

Flybar

Flybar POGO TRICK BOARD Bedienungsanleitung

Crivit

Crivit 93713 Bedienungsanleitung

Lifetime

Lifetime POWER LIFT 90865 Bedienungsanleitung

Hudora

Hudora 76171 Montageanleitung

Axler

Axler GSU-1 Bedienungsanleitung

Aquaglide

Aquaglide FREEFALL 6 LANDING PAD Bedienungsanleitung

Cap Strength

Cap Strength POWER RACK FM-CS7000F Bedienungsanleitung

La Sportiva

La Sportiva RACE BORG Bedienungsanleitung

Crivit

Crivit 302640 Bedienungsanleitung

Sportime

Sportime Equalizer Bedienungsanleitung

T&R Sports

T&R Sports 5FT FOOSBALL TABLE Bedienungsanleitung

Salewa

Salewa VERT Bedienungsanleitung

KICK

KICK Decagon Bedienungsanleitung

byox

byox FJ-4.5FT Bedienungsanleitung

CHINESPORT Spa

CHINESPORT Spa 01325 Bedienungsanleitung

AXI.COM

AXI.COM ConesPro101 Bedienungsanleitung

Insportline

Insportline IN 2052 Bedienungsanleitung

Rugged Interactive

Rugged Interactive CardioWall Compact Kurzanleitung