Spire SPw60 Bedienungsanleitung
Page 1 :
SERVIPAY SARL
10 rue du Lavoir
L-3358, Leudelange
(+352)20 20 23 18
HELPLINE: (+352) 621 237 165
Your key numbers:
TID:…………………….
MID: 21……………..
Elavon technical department
(+32)78 189 978
Elavon finance department
(+352)800 27 865
Page 2 :
User Guide
S P I R E t e r m i n a ls S P w 5 0 , S P w 6 0 and S P w 7 0
Page 2 :RVIPAY
SERVIPAY
CONTENTS
MAKE A SALE
Page 3
CENCEL SALE
Page 4
MAKE A REFUND
Page 5
CLOSE THE DAY
Page 6
PRINT A COPY
Page 6
MAKE A DISTANCE SALE
Page 7
Page 3 :
MAKE A SALE
1. Insert the card into the reader. The reader will recognise the card type (VISA,
Mastercard, Vpay, etc.) and display it on the screen.
2. Enter the amount then press the GREEN BUTTON. E.g. for 20 euros, enter
2000.
3. The customer enters his/her PIN code and confirms it by pressing the GREEN
BUTTON. If the transaction is accepted, the acceptance code will be displayed
on the screen and the terminal will print out the retailer’s receipt.
4. Take your retailer's receipt then press the GREEN BUTTON. The terminal will
then print out the customer’s receipt. Take the customer’s receipt and the
bank card.
If you make an error when entering data, you can correct it by pressing the YELLOW
BUTTON. You can also cancel the entire transaction by pressing the RED BUTTON
Page 4:
CANCEL A SALE
1. Select MENU MAIN on the main screen.
2. Select: 1. New trans
3. Select: 3. Cancel.
4. Enter the security code 0000 (optional).
5. Enter the number of the invoice to be cancelled.
6. The terminal will display the receipt number and the amount to be cancelled.
7. If the amount corresponds, select YES by pressing the GREEN BUTTON. If the
transaction is cancelled, the terminal will print out the retailer's receipt.
8. If you press the GREEN BUTTON, the terminal will also print out the
customer's receipt.
Transactions can no longer be cancelled once the closure is complete.
Page 5:
MAKE A REFUND
1. Select MENU MAIN on the main screen.
2. Select: 1. New trans
3. Select: 2. Refund.
4. Enter the security code 0000 (optional).
5. Enter the amount to be recredited to the customer.
6. Insert the customer’s card into the reader.
7. The terminal will connect to the network, request authorisation and
print out a retailer’s receipt only.
8. If you press the GREEN BUTTON, the terminal will also print out the
customer's receipt.
Page 6 :
CLOSE THE DAY
1. Select MENU MAIN on the main screen.
2. Select: 2. Report.
3. Select: 1. Close.
4. Enter the security code 0000 (optional).
5. The terminal will show you the total sales volume. Validate it by pressing the
GREEN BUTTON.
6. The terminal will show you the total refund volume. Validate it by pressing the
GREEN BUTTON.
7. The terminal will transfer all of the day’s transactions to the purchaser. This
operation may take a couple of minutes.
You can also set up an automatic closure to replace this manual operation. In this
case, the transactions will be transferred at a specific time each day provided the
terminal is switched on and connected to the network.
PRINT A COPY
1. Select MENU MAIN on the main screen.
2. Select: 3. Reports.
3. Select: 3. Reprint.
4. Choose between: 1. to reprint the last transaction or: 2. to reprint an
invoice (if you have the invoice number). Confirm the operation by pressing
the GREEN BUTTON.
Page 7 :
DISTANCE SALE
1. Select: MENU MAIN on the main screen.
2. Select: 1. New trans
3. Select: 1. Sale.
4. Enter the transaction amount then press the GREEN BUTTON.
5. As the customer is not with you and you do not have his/her card, enter the 16-
digit card number then press the GREEN BUTTON.
6. Enter the expiry date in the format MMYY.
e.g. 0916 then press the GREEN BUTTON.
7. The terminal will ask you if the cardholder is present. Select NO by pressing the
YELLOW BUTTON.
8. The terminal will ask you if you have the CVV code (the 3-digit code on the back of the
card). If you do, press 1. If you don’t, press 9.
9. If you pressed 1, you need to enter the 3-digit CVV code then validate it by pressing
the GREEN BUTTON.
10. The terminal will ask for the customer’s address, you can skip this step by pressing
the GREEN BUTTON.
11. The terminal will ask for the customer’s postcode, you can skip this step by
pressing the GREEN BUTTON.
12. The terminal will connect to the network, request authorisation and print out a
retailer’s receipt only.
Andere Handbücher für SPw60
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Spire Zahlungsterminal Handbücher
Spire
Spire T42XX Bedienungsanleitung
Spire
Spire SPc5 Bedienungsanleitung
Spire
Spire SPw60 Bedienungsanleitung
Spire
Spire SPp10 Bedienungsanleitung
Spire
Spire SPm2 Bedienungsanleitung
Spire
Spire SPp10 Service-Handbuch
Spire
Spire SPm2 Bedienungsanleitung
Spire
Spire SPw70 Bedienungsanleitung
Spire
Spire SPg7 Bedienungsanleitung
Spire
Spire SPg7 Bedienungsanleitung
Beliebte Zahlungsterminal Handbücher anderer Marken
Ingenico
Ingenico iWL250B Bedienungsanleitung
Optimum
Optimum M4230 Bedienungsanleitung
Triton
Triton RL5000 Bedienungsanleitung
Ingenico group
Ingenico group Lane/8000 Bedienungsanleitung
Gilbarco
Gilbarco FlexPay IV CRIND Installations- und Betriebshandbuch
Infinite Peripherals
Infinite Peripherals Infinea Tab Lite Bedienungsanleitung
