SPORTS AFIELD Genesis SA1082G-THD Bedienungsanleitung

IMPORTANT:

Please read this information and follow all safety rules carefully before

operating your gun safe. Failure to do so will void your warranty.

INSTRUCTION MANUAL FOR STYLE SA1082G-THD

090122

TABLE OF CONTENTS

www.saproducts.com 1

IMPORTANT INFORMATION ............................................................................................... 2

1. REGISTRATION ................................................................................................................ 3

2. UNDERSTANDING YOUR SAFE ........................................................................................ 4

3. UNBOXING ...................................................................................................................... 4

4. INSPECTION .................................................................................................................... 4

5. INITIAL ENTRY.................................................................................................................. 5

6. PROPER PLACEMENT AND MOVING OF SAFE ................................................................ 6

7. KEEPING YOUR SAFE DRY ............................................................................................... 6

9. SECURING YOUR SAFE .................................................................................................... 7

9. E-LOCK INSTALLATION .................................................................................................... 8

10. SECURITY CODE SETUP FOR NON ILLUMINATED E-LOCKS ......................................... ..9

11. LOW BATTERY WARNING ............................................................................................10

12. E-LOCK QUIET MODE ..................................................................................................10

13. LOCKED OUT OF YOUR SAFE .......................................................................................10

14. LOADING YOUR SAFE .................................................................................................. 11

15. MAINTAINING HINGES AND INTERNAL MECHANISMS ..............................................11

LIFETIME WARRANTY.........................................................................................................12

DISCLAIMER - READ BEFORE SAFE SETUP

FIREARM STORAGE

SAFETY

Thank you for choosing a Sports Aﬁeld Safe to protect your valuables. We are

commied to securing, organizing and protecng your most important documents,

valuables and keepsakes.

Your safe is built to last a lifeme. However, please understand that the locking

mechanism has precision parts. If you experience ANY diﬃculty opening or closing

your safe. DO NOT FORCE THE SAFE OPEN. Doing so may jam the components in

the lock, which will require a safe technician to unlock your safe. This causes an

inconvenience to you and may lead to a claim denial.

If you experience problems or challenges with your safe, please contact us.

Many issues can be quickly resolved without the product being returned.

Safe bodies and doors are extremely heavy thus SA Consumer Products requires a

minimum of two people to insure stability of the safe during installaon. Always ensure

proper installaon, as laid out in this manual, and do not open the door with the safe

on an uneven or unstable ﬂoor. Ignoring this could result in serious injury or death.

If you choose to ulize this safe to store a ﬁrearm always follow proper ﬁrearm and

local laws.

SA Consumer Products strongly recommends that you do not store loaded ﬁrearms.

Always follow the ﬁrearm safety rules set out by the ﬁrearm’s manufacturer.

A Sports Aﬁeld Safe or any other ﬁrearm storage device cannot take the place

of other safety procedures including advising children of the dangers of ﬁrearms.

SA Consumer Products and its distributors of the Sports Aﬁeld Safes do not

recommend, suggest, advise, promote, or otherwise condone the ownership

or use of ﬁrearms. We believe the decision to own or use a ﬁrearm is a serious

decision that should only be made by an adult who has carefully considered

the risks and beneﬁts of such a decision.

PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR SAFE.

DO NOT LOCK THIS MANUAL OR THE OVERRIDE KEYS IN YOUR SAFE.

Contact Customer Service at [email protected] or (888) 792-4264

1. REGISTRATION

Customer Service - (888) 792-4264

Theinformaon you record onto this page will be required in the event you

cannot access thecontents of your safe. Pleaseﬁll out all therequired informaon

below and retain for your records and safe keeping.

PLEASE HAVE THIS INFORMATIONREADY PRIOR TO CALLING FOR TECHNICAL

ASSISTANCE AT:

Contact Customer Service at [email protected] or (888) 792-4264

By registering your Sports Aﬁeld Safe we will be able to expedite and address

any problems or challenges you may have which would otherwiserequirea

notary leer and proof of payment.

REGISTRATION INFORMATION

PURCHASE DATE:

PURCHASE PRICE (BEFORE TAX):

MODEL NUMBER:

SERIAL NUMBER:

RETAILER NAME:

KEY NUMBER (IF APPLICABLE):

2. UNDERSTANDING YOUR SAFE

4. INSPECTION

3. UNBOXING

Make sureto inspect your safefor shipping damagebefore accepng delivery.

If you ﬁnd any damage, please contact the delivery company (or carrier) immediately.

Any damage not noted upon delivery must be reported within ﬁeen (15) days

or there will be no recourse. Any noted damage at the me of delivery must be

resolved with the delivery company and/or retailer. Shipping damage is not

warrantable by SA Consumer Products.

WARNING: SAFES ARE HEAVY AND CAN BE UNSTABLE ON UNEVEN GROUND.

PLEASE ENSURE EXTRA CAUTION WHEN DEALING WITH OR MOVING UNSECURED

SAFES. WHILE UNBOXING BE SURE TO HAVE A SECOND PERSON HOLD AND

STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING INJURY, AND/OR

DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.

Remove thepackaging. If your safe is sll on shipping feet you can simply li

theboxup and oﬀthesafeoncethestrapping has been removed. If your safe

does not have shipping feet you will needto carefully remove thebox, ensuring

not to damage thesafeand/or injure yourself. You will want to have someone

stabilize the safe when removing the cardboard and other packing material

from underneath the safe.

External

Hinges

Drop

Handle

Bolt Down

Holes

Adjustable

Shelf Rails

Top Shelf

Deluxe

Door

Organizer

Override

Key Entry

(Underneath

keypad)

Programmable

E-Lock

9v Battery

Compartment

Reset

Button

Active

Locking

Bolts

5. INITIAL ENTRY

2. Locate the keyhole in the

backer plate. Insert and turn

the override key clockwise

to unlock.

Locatetheoverridekeys

insidetheplasc bag hanging

on thefront of thesafe.

Turn thehandle counter-

clockwiseunl the safedoor

opens. Once open, turn the

handle back to its starng

posion so the bolts are

open and extended.

Remove key.

Step 3 Step 2 Step 1

CONTENTS:

USERS MANUAL

AND OVERRIDE KEYS

6. PROPER PLACEMENT AND MOVING OF SAFE

7. KEEPING YOUR SAFE DRY

We recommend placing a moisture/protecve barrier between your safe and

concrete ﬂoor to prevent any moisture, mildew and rust damage to the safe. Installing

your safe in a place with climate control (heat in the winter and cooling in the summer)

is highly recommended. In areas of high humidity or frequent temperature ﬂuctuaons

(garages) it is recommended to take appropriate precauons to ward against moisture

damage. We strongly encourage the use of an internal dehumidiﬁer and/or desiccants

to protect your contents from rust or mildew. Internal dehumidiﬁers should not be

in direct contact with the side or back walls.

WARNING: SAFES ARE VERY HEAVY AND AWKWARD TO HANDLE. PLEASE USE THE

UTMOST CARE IN MOVING THE SAFE. UTILIZING A TRAINED PROFESSIONAL WITH

PROPER MOVING EQUIPMENT IS HIGHLY RECOMMENDED.

The locaon of the gun safe is very important and the utmost care should be taken

during this consideraon.

Using a dolly capable of supporng thesize and weight of your safe, move thesafe

to your desired locaon. Pleasetakeall necessary precauons to protect and prevent

any damageto your ﬂooring.

HELPFUL: TO DETERMINE WHETHER YOUR SAFE WILL MAKE IT THROUGH DOORWAYS,

STAIRS, OR CORNERS, TAKE THE EMPTY SAFE BOX AND SEE IF IT WILL FIT ALL THE WAY

THROUGH TO ITS FINAL LOCATION.

The safe should be installed adjacent to a side wall with minimal space on either

side of the safe. Wherever possible, the safe should be ﬂat against the wall and

ﬂoor. Remove the baseboard and/or wall trim if necessary.

Always ensure the safe is in an isolated and dry area. Never place the safe in direct

contact with a wet ﬂoor. When installing your safe on a concrete ﬂoor, use of a

moisture/protecve barrier is highly recommended. Failure to do so, or exposing

the safe to chemicals or other adverse environments, may void the warranty.

If your safe seems unlevel, you may need to shim the boom of the safe to

prevent the door from swinging open too quickly, or closing on itself.

To maximize the ﬁre protecon of your safe, we recommend you place the safe in

lower levels in your home where ﬁre temperatures are lower and away from highly

combusble materials.

To maximize burglary protecon and stability, securing the safe to the ﬂoor

is recommended.

SA Consumer Products recommends that you store your safe in a closet, oﬃce,

basement, bedroom or any other locaon that is convenient for you but out of

direct line of sight from prying eyes. The locaon of the gun safe is very important.

SA Consumer Products requires the safe is secured to the ﬂoor to ensure safe does

not p over in case of a ﬂood.

8. SECURING YOUR SAFE

Use the hardware provided or consult your hardware retailer for fastening

hardware for your parcular mounng surface.

Open your safe door and locate and remove the four black caps on the

safe ﬂoor. This will provide access to the factory drilled bolt down holes.

To secure your safe to the ﬂoor it will ﬁrst be necessary to drill pilot holes

in the ﬂoor surface.

Drill the appropriate diameter and depth of pilot holes based on the type of

hardware being used and the type of ﬂoor surface. For the hardware provided

(concrete ﬂoor installaon) we recommend using a hammer drill and 1/2”

concrete drill bit to drill the four corresponding holes in the concrete ﬂoor.

Insert and drive the plasc anchoring plugs into the pilot holes. You may need

to use a hammer to fully insert the plugs into the pilot holes.

Secure the safe, by threading all 4 anchor bolts through the factory drilled bolt

down holes in the boom of the safe and ratcheng down ght.

7. Replace thefour black caps on the ﬂoor of the safe.

WARNING: YOUR SAFE IS DESIGNED TO SUPPORT ITSELF WHEN THE DOOR IS OPENED.

HOWEVER, CAUTION SHOULD BE USED TO AVOID TIPPING. WHILE SECURING YOUR

SAFE BE SURE TO HAVE A SECOND PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT

FROM TIPPING, CAUSING INJURY, AND/OR DAMAGE TO THE SAFE AND SURROUNDING

STRUCTURES. FAILURE TO DO SO WILL COMPROMISE THE SAFETY, SECURITY, AND

WARRANTY OF THE SAFE.

TOOLS NEEDED TO BOLT SAFE TO A CONCRETE SURFACE

• DRILL / HAMMER DRILL

• DRILL BIT – 1/2” ( for installing into concrete with provided hardware)

• WRENCH / 11/16” (17MM) SOCKET

• HAMMER

• SAFETY GLASSES

• GLOVES

• OTHER SAFETY EQUIPMENT AS NEEDED

1. Remove E-Lock from box

located inside of safe.

Note: Keep door open

during installaon with

keys in hand.

9. ELECTRONIC LOCK INSTALLATION

Step 3 Step 1

Step 4

Plug E-Lock cable into the

back of the E-Lock. The

cable connector will only

ﬁt one way.

Align the E-Lock to the

backer plate, with the E-Lock

slightly rotated to the le.

Turn clockwise unl the

E-Lock clicks into place.

Step 2

BACK OF E-LOCK

BATTERY

The E-Lock requires 1x9V

alkaline baery. Locate the

baery compartment on

the back of the E-Lock. Insert

the baery in the proper

orientaon. Keypad will beep

when baery is successfully

installed.

WARNING: The baery must be inserted

with the correct polarity. Exhausted

baery must be removed from the

product and discarded safely.

10. SECURITY CODE SETUP FOR NON ILLUMINATED E-LOCKS

4. Green = Successful Entry

DO NOT CLOSE DOOR

WITHOUT KEY IN HAND

Important: It is necessary to re-program your safe with a new security code you have

personally selected to provide maximum household security. Be careful, in choosing

your new security code, you’ll want to be sure that you can operate the unit quickly

without making an error.

Key in the preset factory code [ 1 5 9 # ].

The right light will turn green. Turn the

handle to ensure bolts are acvated.

Once conﬁrmed return handle to

starng posion to lock bolts out.

On the inside of the safe door, locate

the small brass cap. Unscrew and remove

the cap, you will now see the reset buon.

Press and release the reset buon You

will hear a beep. The yellow (le) light

on the E-lock will illuminate so that you

can enter your new code.

Enter your new 3 to 8 digit security

code while the yellow (le LED) light is

illuminated followed by the [ * ] symbol.

Keypad will beep twice aer pressing

the [ * ] symbol. Reenter new code, now

followed by the [ # ] symbol. The keypad

will ﬂash yellow (le LED), beep twice,

then ﬂash green (right LED).

While the safe door is sll open,

conﬁrm your newly entered security

code. Conﬁrm code by entering the

3-8 digit code followed by the [ # ]. If

successful you will hear two beeps and

the green light will illuminate, allowing

you to retract the bolts.

Note: Do not shut the safe door unl you have conﬁrmed your new security code at least 3 mes to

ensure your code has been saved and you can open the door successfully If the code fails, the yellow

(le) light will ﬂash and beep. Repeat the steps above unl successful.

Warning: If the incorrect security code is entered 3 mes you will have an automac lockout for

20 seconds before you can enter your code again. If 3 addional failed aempts are made, the keypad

will lockout for 5 minutes. Leave baeries in to go through lockout cycle. If baeries are removed the

mer will restart to zero.

Red Reset Button

Brass Cap

NEW 3-8 DIGIT SECURITY CODE

Inhaltsverzeichnis

Andere SPORTS AFIELD Sicher Handbücher

SPORTS AFIELD

SPORTS AFIELD SA55-24V Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA30SM Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD2-BIO Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD PRESERVE BIOMETRIC Series Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD Gun Safe Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD ELEVATION SA1639E-THD Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD6-BIO Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD4 Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD INSTINCT Series Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-CV2-K Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA18SM-D Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD PRESERVE Series Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD1X Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD PRESERVE Series Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD6-BIO-DP Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD 18 Gun Safe Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD PRESERVE SA72-60WD Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD YOSEMITE Series Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD HAVEN Series Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD1-BIO Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD HAVEN Series Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA5932P-BG Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix SS0992K Produktinformationsblatt

Technomax

Technomax Trony Series Handbuch

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Phoenix

Phoenix SS0100E Produktinformationsblatt

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung

Ankaro

Ankaro ANK EZ I Bedienungsanleitung

Phoenix

Phoenix FS1270E Series Bedienungsanleitung