SportsPlay 902-293 6' IND. SECTIONAL SLIDE Bedienungsanleitung

June 11, 2020

902-293 6’ IND. SECTIONAL SLIDE (VL)

INSTALLATION INSTRUCTIONS

INSTALLATION DETAILS

Recommended crew (Adult): 2

Installation time: 4 (8 man hrs)

User age: 5-12

Use zone: 72 in from all sides of unit

Weight:

SURFACING: Use of safety surfacing in compliance with

ASTM specification F1292 is required.

MAINTENANCE:

As the owner of the playground you are responsible for

maintenance of the equipment and play area. A

maintenance schedule must be developed, and the

equipment inspected frequently. A maintenance section

that includes component specific maintenance

requirements is included at the end of this manual.

Be sure to inspect surfacing for foreign objects that could

cause injury and that enough surfacing is in place in

accordance with ASTM and CPSC standards.

June 11, 2020

902-293 6’ IND. SECTIONAL SLIDE (VL)

INSTALLATION INSTRUCTIONS

PARTS LIST

PART #

DESCRIPTION

QTY

435-640LR

6’ Sectional Slide

435-640LR

Support Brace

435-640LR

Slide Hardware Bag

905-712

Step to 6’ Deck

913-230

Transfer Point Inside Leg

913-712

Indep. Slide Post

913-714

Indep. Slide Handrail

913-721L

Ind. Sec. Slide Left Guard Wall

913-721R

Ind. Sec. Slide Right Guard Wall

913-720

Indep. Sec. Slide Deck

903-214

T Leg for DW Slide

316-601

3/8” Flat Washer SS

226-602

3/8” Nylon Insert Lock Nut

126-708

3/8”x 2 ¼” Button Pin SS

126-703

3/8”x 1” Button Pin SS

126-705

3/8”x 2” Button Pin SS

126-706BPS

3/8” x 1 ¾” Button Pin SS

126-701BPS

3/8” x 1 ¼” Button Pin SS

516-200

3/8” Zip Toggle

416-402BPK

7/32 Button Pin Key Short Arm

NOTE:Keep a copy of these instructions on file to assist you

with maintenance and replacement parts.

June 11, 2020

902-293 6’ IND. SECTIONAL SLIDE (VL)

INSTALLATION INSTRUCTIONS

FOOTING INFORMATION

Total footing depth is 40” less the height of the surfacing

plus the height of the blocking material. If you are using

12” of surfacing the footing hole would need to be 28” plus

the height of the blocking material (refer to both the side

and front cutaway views to the right).

If the Play structure is installed on an unlevel grade you

must adjust the footing depth to accommodate the grade.

For instance, if the grade for this component is 1” higher

than the surface grade of the main playground post you

must dig your footing hole 1” deeper.

You must place the bottom of the support post or slide leg

on a suitable flat blocking material to prevent it from

sinking further into the soil. We recommend you use a

brick, block of wood or several inches of gravel. The

footing depth does not include this blocking material since

materials used often vary.

It is the owner/installers responsibility to check local

building codes and to comply with those codes. All footing

depths listed here are recommendations and local soil types

and frost lines may require a deeper and/or wider footing

depth. If that is the case you must add more blocking

material to accommodate the deeper footing, as the post

length will still only be installed at the depth listed in this

instruction manual.

Assemble the entire unit before adding the concrete unless

instructed to do so in the individual component instruction

sections.

June 11, 2020

902-293 6’ IND. SECTIONAL SLIDE (VL)

INSTALLATION INSTRUCTIONS

ELEVATION AND

FOOTING LAYOUT

June 11, 2020

902-293 6’ IND. SECTIONAL SLIDE (VL)

INSTALLATION INSTRUCTIONS

SPECIFICATIONS

Paint – Electrostatically applied & oven cured powder coat

Hardware –Stainless steel & tamper resistant

Tube –FloCoat® Galvanized 1 3/8” O.D. and 1” O.D.

Curved Sectional Slide-Roto-Molded Plastic

SPECIAL SAFETY & ASTM COMPLIANCE NOTES

CRITICAL MEASUREMENT IT IS EXTREMILY

IMPORTANT THAT YOU MAINTAIN A MAXIMUM

OF 3 1/2” DISTANCE BETWEEN THE BOTTOM, OR

SIDES OF THE BUMP WAVE SLIDE ENTRANCE

WALL AND THE NEAREST EDGE OF THE DECK OR

POSTS.

INSTALLATION TIPS & TROUBLE SHOOTING

SportsPlay Equipment Inc. recommends pre-drilling the

holes in the post when attaching a four-hole bracket with a

number #7 drill bit. This will make the attachment of the

four-hole bracket with the self-tapping screws easier and it

will prevent damage to the screw head during installation.

Apply locktite to all bolts during assembly prior to

completely tightening them.

Stainless Steel hardware can occasionally be difficult to use

particularly if you need to take them out to make an

adjustment. It is recommended that you add a drop of oil to

bolts that may have to be removed before you install them.

Do not tighten bolts all the way until the unit is completely

assembled and all components are square and level.

Identify and separate all parts by referencing the detail

drawings and the parts list.

As you unpack and separate the components use the

cardboard sheets that were used for packing and shipping to

prevent damage to the components. This is particularly true

all Powder Coated and Thermoplastic coated components,

by setting the components on top of the cardboard.

June 11, 2020

902-293 6’ IND. SECTIONAL SLIDE (VL)

INSTALLATION INSTRUCTIONS

BEFORE YOU BEGIN

In addition to the components on the packing list you will need a

drill with a ½” drill bit, tape measure, post hole digger, blocking

material, level, and a dry erase marker.

INSTALLATION STEPS

__1) Review all instructions before beginning:

__2) Unpack, organize, and identify all components:Be sure to

place all painted components on a protective surface (cardboard,

cloth, etc…) to prevent damage.

__3) Locate placement of the Independent Sectional Slide: See

top down view of your instruction booklet.

__4) Layout the Footing holes for the Independent Sectional

Slide: Locate your footing drawing and mark your holes as shown.

Dig your footing holes to the proper depth.

__5) Attach the Independent Sectional Slide Deck to the post:

Attach the Independent Sectional Slide Deck (8) to the post (4). See

Detail A. Align the deck to the posts. Attach with four 1-1/4” bolts

(16), eight 3/8” flat washers (10), and four 3/8” lock nuts (11).

Tighten. Slide post into the designated hole. Make sure the slide

side of the deck and the stair side of the deck are facing the correct

directions. Brace in position.

Detail A

June 11, 2020

902-293 6’ IND. SECTIONAL SLIDE (VL)

INSTALLATION INSTRUCTIONS

INSTALLATION STEPS CONTINUED

__6) Attach the Steps to 6’ Deck to Independent Sectional Slide

Deck:Attach the Steps to 6’ Dec (2) to the Independent Sectional

Slide Deck (8) using three 1” bolts (13), six 3/8” flat washers (10),

and three 3/8” lock nuts (11). Hand tighten only. See Detail B.

__7) Attach Transfer Point Inside Legs to Steps: With the steps

in place, place the transfer point inside legs into their designated

holes. Attach the legs to the steps with two 1-¼” bolts (16), four

3/8” flat washers (10), and two 3/8” lock nuts (11). Tighten.See

Detail C.

Detail B

Detail C

June 11, 2020

902-293 6’ IND. SECTIONAL SLIDE (VL)

INSTALLATION INSTRUCTIONS

INSTALLATION STEPS CONTINUED

__8) Attaching the Steps to 6’ Deck to Independent Sectional

Slide Deck: There is a left-side (6) and a right-side guard wall (7).

The tabs will attach to the slide and will be parallel to each other.

Attach the Independent Sectional Slide Guard Wall (6,7) to the

Independent Sectional Slide Deck (8) with six 1” bolts (13), twelve

3/8” flat washers (10), and six 3/8” lock nuts (11). Hand tighten

only. See Detail D.

Detail D

June 11, 2020

902-293 6’ IND. SECTIONAL SLIDE (VL)

INSTALLATION INSTRUCTIONS

INSTALLATION STEPS CONTINUED

__9) Attaching the Handrails to the Structure:

With help, insert the end of the handrail with the threads welded

into it into the stub of the guard wall. Attach the handrails to the

guard wall using a 2” bolt (14) and a flat washer (10). Hand

tighten only. See Detail E.

Attach the Independent Slide Handrails (5) to the steps (2) using

four 2-¼” bolts (12), eight 3/8” flat washers, and four 3/8” lock

nuts (11). Hand tighten only. See Detail F.

Repeat on the other side.

Detail E

Detail F

June 11, 2020

902-293 6’ IND. SECTIONAL SLIDE (VL)

INSTALLATION INSTRUCTIONS

INSTALLATION STEPS CONTINUED

__10) Assemble the slide: The two components of the slide need

to be assembled. An additional hardware kit is attached to the slide

entrance. Bolt the pieces of the slide together with the bolt heads on

the slide entrance side. Hand tighten only. Once the slide is in

place, the nuts will need to be removed to attach the support brace.

__11) Attach the Slide to the Deck: Hoist the slide to the deck and

attach using three 1-¾” bolts (15) and three flat washers (10).

Hand tighten only. See Detail G.

__12) Attach T Legs to the Slide: Place the T legs (9) into the

designated holes. Attach the legs to the exit of the slide with four 1-

¼” bolts (16) and four 3/8” flat washers (10). Tighten.See Detail

Detail H

Detail G

Inhaltsverzeichnis

Andere SportsPlay Spielgeräte und Spielplatzausstattung Handbücher

SportsPlay

SportsPlay SUPER SLIDE Bedienungsanleitung

SportsPlay

SportsPlay Jeremy 911-116-N Bedienungsanleitung

SportsPlay

SportsPlay 911-255 Bedienungsanleitung

SportsPlay

SportsPlay 581-638H Bedienungsanleitung

SportsPlay

SportsPlay MODERN BIPOD ADA SWING Bedienungsanleitung

SportsPlay

SportsPlay 511-114 Bedienungsanleitung

SportsPlay

SportsPlay Mega Series Bedienungsanleitung

SportsPlay

SportsPlay Ray 911-110 Bedienungsanleitung

SportsPlay

SportsPlay Megan Bedienungsanleitung

SportsPlay

SportsPlay Vault Bar Bedienungsanleitung

SportsPlay

SportsPlay 581-442HD Bedienungsanleitung

SportsPlay

SportsPlay HERCULES CLIMBER VI Bedienungsanleitung

SportsPlay

SportsPlay 581-438F Bedienungsanleitung

SportsPlay

SportsPlay 581-438M Bedienungsanleitung

SportsPlay

SportsPlay 511-102 Bedienungsanleitung

SportsPlay

SportsPlay 902-706 Gebrauchsanweisung

SportsPlay

SportsPlay 581-438H Bedienungsanleitung

SportsPlay

SportsPlay ZACK Bedienungsanleitung

SportsPlay

SportsPlay QUICK SHIP 1 MODIFIED Bedienungsanleitung

SportsPlay

SportsPlay 581-230F Bedienungsanleitung

SportsPlay

SportsPlay 601-695S Bedienungsanleitung

SportsPlay

SportsPlay 581-218 Bedienungsanleitung

SportsPlay

SportsPlay 581-440HD Bedienungsanleitung

SportsPlay

SportsPlay HERCULES CLIMBER VII Bedienungsanleitung

Beliebte Spielgeräte und Spielplatzausstattung Handbücher anderer Marken

FUNormous

FUNormous Disney Junior MICKEY MOUSE Bedienungsanleitung

b4Adventure

b4Adventure Slackers TREEZONE ADVENTURE THREE HOUSE Bedienungsanleitung

PoolMaster

PoolMaster 72775 Bedienungsanleitung

Palmako

Palmako 4743142009857 Installationshandbuch

BOERPLAY

BOERPLAY PSTE000.019 Bedienungsanleitung

MGA Entertainment

MGA Entertainment Little Tikes Dunk'n Toss Bouncer Benutzerhandbuch

stilum

stilum Erika Bedienungsanleitung

Costway

Costway NP10816 Bedienungsanleitung

Trigano

Trigano VABI Bedienungsanleitung

Outward

Outward OUT116 Bedienungsanleitung

GALOPIN

GALOPIN ARC02 Bedienungsanleitung

stilum

stilum levis Technische Daten

Ledon

Ledon BASIC Bai LB012 Bedienungsanleitung

BOERPLAY

BOERPLAY PSTE115.002 Bedienungsanleitung

Europlay

Europlay S306 Programmierhandbuch

SportsPlay Equipment

SportsPlay Equipment 361-509H Bedienungsanleitung

Ledon

Ledon 302250 Bedienungsanleitung

Costway

Costway NP10441 Bedienungsanleitung