6
SECTION 3
CHILLED GLAZE OVERVIEW
3.1 INTRODUCTION
The AutoJet® Chilled Glaze Spray System is used in a variety of chilled and glaze applicaons when temperature and
coang control is needed. The system provides temperature control on demand to cool any glaze uid that must
maintain a specic lower temperature for spraying on buns, bread, etc. This system easily pairs with many nozzle or
spray header setups that are desired for your glaze applicaon.
3.2 PRODUCT FEATURES
The AutoJet® Chilled Glaze Spray System is a cooling system paired with Precision Spray Control ulizing PulsaJet®
nozzles oered by Spraying Systems Co.®. This system provides chilled glaze for your applicaon in an all sanitary
design with clamp-style connecons and stainless steel pressure tank equipped with a chiller probe for constant
cooling of your liquid glazing uid. The desired temperature of your uid is controlled by a liquid chiller pump that is
constantly recirculang water through the chiller probe that sits inside of the tank. An agitator keeps the uid
moving around the chiller probe to ensure consistent temperature and helps to maintain your uid in suspension.
This Chilled Glaze System will come on a spray cart with mulple mounng capabilies for an AutoJet spray
controller, zoning control panel, power distribuon box, level sensor/auto-rell, liquid chiller pump, and mounng of
the glaze pressure tank. An oponal three-wheeled tank dolly is also available for mounng the chiller pump without
all of the other mounng capabilies of the cart system.
3.3 SYSTEM OVERVIEW
The liquid supply module provides pressurized process liquid to the spray nozzles. All module components are made
of sanitary design and assembled with sanitary clamp style connecons. The Chilled Glaze system will feed the liquid
delivery line, distribuon manifold, and nozzle(s) directly. The liquid supply module consists of:
• Liquid chiller pump should be primed and ran using clean water.
• Agitator component should be used with clean oiled air operang 0 to 60 psi maximum.
• Liquid outlet drain unit with manual 3-way bypass valve on uid outlet and 2-way outlet valve for direct uid
line shut o. Sanitary liquid supply hose, 1/2” ferrule, 10
• Air motor driven liquid agitator unit which includes:
—Fully enclosed air motor
—Stainless steel sha with propeller
—4” port sanitary clamp type mounng
• Liquid chiller unit consisng of:
—Chiller probe with sanitary clamp style connecon to tanks
—Quick couplers with push in tube ngs on thermowell chiller probe connecons
• System dolly (oponal): Three-caster, 304 stainless steel construcon
• Oponal Variable Spray Mount Soluon for easy adjustability, cleaning, and mounng of PulsaJet® nozzles.
• Oponal zone control panel for specic applicaon targeng by turning on and o individual/groups of nozzles.
3.4 SPECIFICATIONS
The user’s responsibility is assuring the compability of the weed parts of this system with the process liquid and
strongly suggested that the user research the liquid to assure compability with these materials or submit this list of
materials to the process liquid supplier or other knowledgeable authority for analysis.
