ST STEVAL-MKSBOX1V1 Bedienungsanleitung

Introduction

The STEVAL-MKSBOX1V1 (SensorTile.box) is a ready-to-use box kit with wireless IoT sensor platform designed to help you

build apps that use motion and environmental sensors, regardless of your level of expertise.

The hardware node is a board that fits into a small plastic case (IP54) with a rechargeable battery. You can connect with your

smartphone to the board via Bluetooth by using the ST BLE Sensor app (available both on Google Play and Apple Store) and

immediately build your own apps through a special interface that offers beginner and expert level functionality. This multi-sensor

kit therefore allows you to design wireless IoT and wearable sensor applications quickly and easily, without performing any

programming.

SensorTile.box includes a firmware programming and debugging interface that allows professional developers to engage in

more complex firmware customization using the STM32 Open Development Environment (STM32 ODE), which includes a

sensing AI function pack with neural network libraries.

The kit board includes an embedded SPBTLE-1S Bluetooth SMART application processor that is compliant with BT

specification v4.2. This transmitter module is FCC (ID:S9NSPBTLE1S) certified and IC (IC:8976-SPBTLE1S) certified.

Figure 1. STEVAL-MKSBOX1V1 (SensorTile.box) multi sensor development kit

How to use the wireless multi sensor development kit with customizable app for

IoT and wearable sensor applications

UM2580

User manual

UM2580 - Rev 5 - May 2020

For further information contact your local STMicroelectronics sales office.

www.st.com

1How to set up the hardware

Important:

Before you begin, please check the insert card that comes with the SensorTile.box blister pack. If it doesn't show a procedure

for battery connection similar to the steps below, then your device is supplied with the battery already connected to the board.

In this case, you only need to connect the device via USB to wake it up the first time.

If the insert card has a similar procedure to the steps below, your device is supplied with the battery disconnected and you

should follow this procedure to connect the battery and wake the device up.

Step 1. Remove the SensorTile.box contents from its package.

Step 2. Unscrew the shroud cover.

You should have the following items:

– An evaluation board in a plastic shroud

– A LiPo battery

Step 3. Slide the male battery connector vertically into the female connector on the board.

You will hear a light click when the connector is attached correctly.

Figure 2. STEVAL-MKSBOX1V1 battery connection

Step 4. Re-position the circuit with the battery below it and the close the shroud with one of the following types

of lid:

–with flanges

– without flanges

Step 5. If necessary, charge the battery via a USB cable.

The blinking of the red LED indicates the battery charging status.

UM2580

How to set up the hardware

UM2580 - Rev 5 page 2/41

2How to use ST BLE Sensor app with SensorTile.box

Before you begin, you need to download and install our ST BLE Sensor app on your smartphone. The app is

available from the Google and Apple online stores.

Step 1. Launch the app on your smartphone.

Figure 3. ST BLE Sensor app main screen

UM2580

How to use ST BLE Sensor app with SensorTile.box

UM2580 - Rev 5 page 3/41

Step 2. Select [CREATE A NEW APP].

The Example Apps screen that follows lists the preloaded apps that you can use immediately.

Figure 4. Example Apps screen

UM2580

How to use ST BLE Sensor app with SensorTile.box

UM2580 - Rev 5 page 4/41

Step 3. Select one of the apps with the icon from the list.

After you select the app, ST BLE Sensor will scan for available SensorTile.box devices in range.

Figure 5. Board selection

Step 4. Select the appropriate SensorTile.box device from the Board screen.

A blue LED on the SensorTile.box device will flash slowly to confirm Bluetooth pairing.

A pop up message in ST BLE Sensor will prompt you to confirm loading the new app in replacement of

any previously opened apps.

Step 5. Select the appropriate SensorTile.box device from the Device List.

The app will commence monitoring or logging activity and return real time feedback data to the

corresponding app screen in ST BLE Sensor.

UM2580

How to use ST BLE Sensor app with SensorTile.box

UM2580 - Rev 5 page 5/41

3Application descriptions

3.1 Mode 1 example apps

The ST BLE Sensor bundles the following ready-to-use app scenarios:

• Baby Crying Detector

• Barometer

• Compass and Level

• Data Recorder

• Human Activity recognition

• In-Vehicle Baby Alarm

• Pedometer

• Sensor Fusion - Quaternion

• Vibration Monitor - Training

• Vibration Monitor - Compare

Figure 6. Apps screen

App scenarios with the icon produce immediate outputs on your smartphone in real time.

App scenarios with the icon store sample data on the internal micro SD card.

App scenarios with the icon are reserved for Expert mode.

UM2580

Application descriptions

UM2580 - Rev 5 page 6/41

RELATED LINKS

Appendix A ARMA filter coefficient calculation on page 36

3.1.2 Barometer app

The Barometer app uses the Sensortile.box on-board environmental sensors (STTS751, LPS22HH and HTS221).

Figure 11. Barometer app screen

The Barometer app monitors the environmental information in real-time and shows the data on your smartphone

as icons or graph plot.

The LPS22HH pressure sensor embeds another built-in sensor for temperature compensation (0.5 hPa with a

range of 260-1260 hPa of absolute pressure).

The STTS751 digital temperature sensor has an operating temperature range of -40/+125 °C, with maximum

resolution 0.0625 °C/LSB and precision of ± 0.5 °C (typ.).

The HTS221 digital relative humidity and temperature sensor has a relative humidity range of 0/100%, a

sensitivity of 0.004% RH/LSB, a humidity accuracy of ± 3.5% RH, 20-80% RH and an accuracy in temperature of

± 0.5 °C (typ,) in the range of 15/+40 °C.

UM2580

Mode 1 example apps

UM2580 - Rev 5 page 9/41

When you run the Barometer app and connect the Sensortile.box device, the ST BLE Sensor app shows a

monitoring screen for the environmental sensors.

Figure 12. Environmental screen

You can access other output options from the menu icon in the top left of the screen.

UM2580

Mode 1 example apps

UM2580 - Rev 5 page 10/41

Inhaltsverzeichnis

Andere ST Mikrocontroller Handbücher

ST STM32F746NGH6 Bedienungsanleitung

ST STM32H745I-DISCO Bedienungsanleitung

ST ST7260 Series Bedienungsanleitung

ST STM32F4 Series Bedienungsanleitung

ST STM32H74xI/G Bedienungsanleitung

ST STEVAL-2STPD01 Bedienungsanleitung

ST STM32H7 3 Series Montage- und Bedienungsanleitung

ST ST10 Series Betriebsanleitung

ST UM2135 Bedienungsanleitung

ST STR9 Bedienungsanleitung

ST STM32F103 series Montage- und Bedienungsanleitung

ST STM32F7508-DK Handbuch

ST STM32WL55JC Bedienungsanleitung

ST STM32F0 Series Montage- und Bedienungsanleitung

ST STM32F74 Series Bedienungsanleitung

ST STM32 Nucleo Montage- und Bedienungsanleitung

ST L638E Series Benutzerhandbuch

ST SPC574S-DISP Sphaero Discovery+ Bedienungsanleitung

ST STM8L-DISCOVERY Bedienungsanleitung

ST STM8L Montage- und Bedienungsanleitung

ST STM32F103 series Montage- und Bedienungsanleitung

ST STM32L496 Series Montage- und Bedienungsanleitung

ST STM32 Nucleo Bedienungsanleitung

ST B-L462E-CELL1 Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung