ST SPC58NHADPT386S Bedienungsanleitung

Introduction

The SPC58NHADPT386S Rev.C evaluation board supports STMicroelectronics SPC58NH92 microcontroller in FPBGA

19x19x1.8 386 package.

Figure 1. SPC58NHADPT386S Rev.C

Note: picture not contractual

SPC58NHADPT386S Rev.C evaluation board

UM2789

User manual

UM2789 - Rev 1 - April 2021

For further information contact your local STMicroelectronics sales office.

www.st.com

1Overview

The SPC58NHADPT386S Rev.C "mini module" is an evaluation board supporting STMicroelectronics

SPC58NH92 microcontroller in FPBGA 19x19x1.8 386 package (FPBGA 19x19x1.8 386 3R22+10+2R14+52

PITCH 0.8 BALL 0.55). This "mini module" is designed to be connected onto the SPC58xxMB motherboard,

offering a mechanism for easy customer evaluation of the supported devices and to facilitate hardware and

software development. The "mini module" may be used as a stand-alone unit allowing access to the CPU, limited

access to the I/O pins as well as any motherboard peripherals.

Figure 2. Overview of SPC58NHADPT386S Rev. C "mini module" - top

UM2789

Overview

UM2789 - Rev 1 page 2/36

Figure 3. Overview of SPC58NHADPT386S Rev. C "mini module" - bottom

1.1 Package contents

An SPC58NHADPT386S Rev. C adapter package includes the following item:

• SPC58NHADPT386S Rev. C "mini module"

The MCU is not included, it must be purchased separately. Please contact your sales representative for more

details.

1.2 Supported devices

The SPC58NHADPT386S Rev. C "mini module" supports the following STMicroelectronics family of

microcontrollers in FBGA 19x19x1.8 386 package:

• SPC58NH92C5xx

UM2789

Package contents

UM2789 - Rev 1 page 3/36

2License agreement

The packaging of this evaluation board was sealed with a seal stating, by breaking this seal, you agree to the

terms and conditions of the evaluation board license agreement, the terms and conditions of which are available

at:

https://www.st.com/resource/en/evaluation_board_terms_of_use/evaluationproductlicenseagreement.pdf

Upon breaking the seal, you and STMicroelectronics entered into the evaluation board license agreement, a copy

of which is also enclosed with the evaluation board for convenience.

Attention: This evaluation board only offers limited features for evaluating ST products. It has not been tested for use

with other products and is not suitable for any safety or other commercial or consumer application. This

evaluation board is otherwise provided “AS IS” and STMicroelectronics disclaims all warranties, express or

implied, including the implied warranties of merchantability and fitness for a particular purpose.

UM2789

License agreement

UM2789 - Rev 1 page 4/36

3Handling precautions

Please take care to handle the package content in order to prevent electrostatic discharge.

Before the EVB is used or power is applied, please fully read the following sections on how to correctly configure

the board. Failure to correctly configure the board may cause irreparable component, MCU or EVB damage.

UM2789

Handling precautions

UM2789 - Rev 1 page 5/36

4Hardware description

4.1 Hardware features

The SPC58NHADPT386S Rev. C "mini module" board has the following features:

• Connector for external power supplies input (5 V) used in stand-alone mode

• Reset button with driver and led indicator

• Socket for device in FPBGA386 package

• Debug interfaces:

– 14-pin header connector for JTAG interface

– 10-pin header connector for JTAG/LFAST LVDS interface

– 10-pin header connector for SIPI interface

– 38-pin Nexus parallel debug connector

• 40 MHz crystal main oscillator with jumpers to optionally disconnect it

• 8 MHz oscillator with jumpers to optionally disconnect it

• Clock input through SMA connector with jumper to optionally disconnect it

• 2 X Samtec QSH series, 240-way connector to connect mini module to motherboard

• 1 Gb/s Ethernet port

• HyperRAM and HyperFlash connected to HyperBUS interface

• Embedded eMMC device

• SD/MMC card reader

• 3 x Header connectors 5x2 with 0.1” (CIS, ISU and AI connectors)

4.2 Hardware dimensions

The "mini module" has the following dimensions:

• PCB area: 157 mm x 114.3 mm

• Top components height: 19 mm max

• Bottom components height: 3.5 mm max

UM2789

Hardware description

UM2789 - Rev 1 page 6/36

5Power and system configuration

5.1 Power supplies

The "mini module" can be powered by providing voltages or supplied externally by the 2-Way PCB screw

connector (CN1) or supplied by the motherboard.

When the "mini module" is connected to the motherboard (MB), 1.25 V, 3.3 V and 5.0 V are supplied by MB

connector selecting the associated jumpers. In this setup, the external power supply input available on the "mini

module" should NOT be used.

When the SPC58NHADPT386S Rev. C "mini module" is used as a stand-alone board, 5V0 voltages must be

supplied externally, 3V3 and 1V2 voltages will be generated internally by specific circuit on the "mini module".

The following jumpers are used to configure the power supply (common for all supported devices):

Table 1. Power configuration jumpers

Jumper Description Default Position

3.3V_SR switching voltage configuration:

• 1-2 3.3V (3V3 generated by "mini

module")

• 2-3 MB_3.3V_SR (3V3 by

motherboard)

1-2

(3.3V by "mini module")

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - C3

J40

VDD_HV_ADR_S / VDD_HV_ADV voltage

configuration:

• 1-2: 5.0V_ADV

• 3-2: 3.3V_ADC

• 4-2: 3.3_SR

• 5-2: 5.0_SR

1-2

(5.0V_ADV)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - C3

5.0V_SR switching voltage configuration:

• 1-2 5.0V_EXT (5V0 externally voltage)

• 2-3 MB_5.0V_SR (5V0 by

motherboard)

2-3

(5.0V_SR by MB)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - D3

5.0V_ADV configuration:

• 1-2 MB_5.0V_LR (5.0V linear from

MB)

• 2-3 5.0V_ADC (5.0V filtered)

2-3

(5.0V_ADC)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - D3

VDD_HV_FLA voltage configuration:

• 1-2 5.0V_SR

• 2-3 3.3V_SR

1-2

(5.0V_SR)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - A2

VDD_HV_IO_EMMC voltage enable:

• Closed: connect 3.3V_SR to

VDD_HV_IO_EMMC pins

Closed

(connect 3.3V_SR to

VDD_HV_IO_EMMC pins)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - C2

1.2V_SR switching configuration:

• 1-2 MB_1.25V_SR (1.25V from MB)

• 2-3 1.2V (1.2V from "mini module")

2-3

(1.2V from "mini module")

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - D4

VDD_HV_IO_ETH1 voltage enable:

• Closed: connect 3.3V_SR to

VDD_HV_IO_ETH1 pins

Closed

(connect 3.3V_SR to

VDD_HV_IO_ETH1 pins)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - B1

VDD_HV_IO_ETH0 voltage configuration:

• 1-2 5.0V_SR

• 2-3 3.3V_SR

1-2

(5.0V_SR)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - A3

UM2789

Power and system configuration

UM2789 - Rev 1 page 7/36

Jumper Description Default Position

5.0V_ADC filtered voltage enable:

• Closed: connect the 5.0V_EXT to

5.0V_ADC trough the filter circuit.

Closed

(5.0V_ADC)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - D3

J10

VDD_HV_IO_MAIN voltage configuration:

• 1-2 5.0V_SR

• 2-3 3.3V_SR

1-2

(5.0V_SR)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - A3

J11

VDD_HV_OSC voltage configuration:

• 1-2 5.0V_SR

• 2-3 3.3V_SR

1-2

(5.0V_SR)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - A1

J12

BALLAST CIRCUIT ENABLE

• Closed: enabled

• Open: disable

Closed

(enable)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - B1

J13

Supply for BALLAST circuit configuration

• 1-2 VDD_HV_IO_MAIN

• 2-3 5.0V_SR

1-2

(VDD_HV_IO_MAIN)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - B1

J14

VDD_LV voltage configuration:

• 2-1 (BALLAST circuit)

• 2-3 (1.2V_SR)

• 2-4 (SMPS regulator module)

2-3

(1.2V_SR)

Figure 9. Overview of

SPC58NHADPT386S Rev. C "mini

module" - top - A1

UM2789

Power supplies

UM2789 - Rev 1 page 8/36

5.2 JTAG/LFAST LVDS interface configuration

The following jumpers need to configure the JTAG/LFAST LVDS/SIPI:

Table 2. JTAG/LFAST/SIPI configuration jumpers

Jumper Description Default Position

J15

JTAG/LFAST LVDS pin 7 configuration

• 1-2: EVTI

• 2-3: PK10

1-2

(EVTI)

Figure 9. Overview of SPC58NHADPT386S Rev. C "mini

module" - top - A4

J16

JTAG pin 1/ LFAST LVDS pin 6

configurations

• 1-2: TDI

• 2-3: PA8

1-2

(TDI)

Figure 9. Overview of SPC58NHADPT386S Rev. C "mini

module" - top - A4

J17

JTAG pin 3/ LFAST LVDS pin 4

configurations

• 1-2: TDO

• 2-3: PA9

1-2

(TDO)

Figure 9. Overview of SPC58NHADPT386S Rev. C "mini

module" - top - A4

J18

JTAG pin 13 configuration

• 1-2: EVTO

• 2-3: PJ3

1-2

(EVTO)

Figure 9. Overview of SPC58NHADPT386S Rev. C "mini

module" - top - A4

J19

PC1 / ESR0

• 1-2 ESR0

• 2-3 PC1

1-2

(ESR0)

Figure 9. Overview of SPC58NHADPT386S Rev. C "mini

module" - top - A4

J20

EVTO/ESR0

• 1-2 ESR0

• 2-3 EVTO

1-2

(ESR0)

Figure 9. Overview of SPC58NHADPT386S Rev. C "mini

module" - top - A4

J39

PE3 / CLKOUT

• 1-2 CLKOUT

• 2-3 PE3

1-2

(CLKOUT)

Figure 9. Overview of SPC58NHADPT386S Rev. C "mini

module" - top - A4

UM2789

JTAG/LFAST LVDS interface configuration

UM2789 - Rev 1 page 9/36

5.3 System clock configuration

The mini module supports the usage of crystal clock sources as well as external clock source:

Table 3. Clock configuration jumpers

Jumper Description Default Position

J23

XTAL32 configuration:

• Close: connect pin 2 of 32.768 KHz crystal

(Y2) to XTAL32

Open Figure 9. Overview of SPC58NHADPT386S

Rev. C "mini module" - top - C2

J24

EXTAL32 configuration:

• Close: Connect pin 1 of 32.768 KHz

crystal (Y2) to EXTAL32

Open Figure 9. Overview of SPC58NHADPT386S

Rev. C "mini module" - top - C2

J25

EXTAL configuration:

• 1-2 Connect pin 2 of 40 MHz crystal (Y1)

to EXTAL

• 2-3 EVB-EXTAL

1-2

(XT1 pin2)

Figure 9. Overview of SPC58NHADPT386S

Rev. C "mini module" - top - B1

J26

XTAL configuration:

• 1-2 Connect pin 1 of 40 MHz crystal (Y1)

to XTAL

• 2-3 GND

1-2

(XT1 pin1)

Figure 9. Overview of SPC58NHADPT386S

Rev. C "mini module" - top - B1

J27

Enable 8 MHz oscillator power supply:

• open – Power off

• closed – Power on

Open

(power off)

Figure 9. Overview of SPC58NHADPT386S

Rev. C "mini module" - top - B2

J28

External 8 MHz clock source:

• 1-2 OSC-MOD (from oscillator)

• 2-3 EXTAL-SMA (from SMA connector)

1-2

(8 MHz from

oscillator)

Figure 9. Overview of SPC58NHADPT386S

Rev. C "mini module" - top - B1

UM2789

System clock configuration

UM2789 - Rev 1 page 10/36

Andere Handbücher für SPC58NHADPT386S

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST FP-SNS-6LPNODE1 Bedienungsanleitung

ST STEVAL-AETKT2V1 Bedienungsanleitung

ST NUCLEO-WL55JC STM32WL Bedienungsanleitung

ST NUCLEO-L433RC-P Bedienungsanleitung

ST ST7LIT15BY0 Bedienungsanleitung

ST STM32H753I-EVAL Bedienungsanleitung

ST STM32MP157F-EV1 Bedienungsanleitung

ST SPC5-UDESTK Bedienungsanleitung

ST STEVAL-STRKT01 Administratorhandbuch

ST STLINK-V3SEGT Bedienungsanleitung

ST L5965 Bedienungsanleitung

ST STSW-IDS002V1 Bedienungsanleitung

ST X-NUCLEO-IDB04A1 Bedienungsanleitung

ST AEK-MOT-TK200G1 Bedienungsanleitung

ST STEVAL-IDB007V Series Bedienungsanleitung

ST STM32MP157 Series Bedienungsanleitung

ST STM32L073Z-EVAL Bedienungsanleitung

ST SPC560P-DISP Bedienungsanleitung

ST SPC572LADPT100S Bedienungsanleitung

ST STM32429I-EVAL1 Bedienungsanleitung

ST EVAL-L9963E-MCU Bedienungsanleitung

ST eMotion STEVAL-MKI109V1 Bedienungsanleitung

ST P-NUCLEO-USB002 Bedienungsanleitung

ST EVALSTGAP2S Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung