ST STEVAL-IDB007V Series Bedienungsanleitung

Introduction

The STEVAL-IDB007Vx (STEVAL-IDB007V1/STEVAL-IDB007V2) is an evaluation board based on BlueNRG-1 (QFN32

package).

The STEVAL-IDB008Vx (STEVAL-IDB008V1/STEVAL-IDB008V2) is an evaluation board based on BlueNRG-2 (QFN32

package).

The STEVAL-IDB009Vx (STEVAL-IDB009V1) is an evaluation board based on BlueNRG-2 (QFN48 package).

BlueNRG-1 (QFN32 package) and BlueNRG-2 (QFN32 and QFN48 packages) are low power Bluetooth® smart systems-on-

chip compliant with the Bluetooth® specification and support master, slave and simultaneous master-and-slave roles.

The document content is valid for the STEVAL-IDB007Vx, STEVAL-IDB008Vx and STEVAL-IDB009Vx platforms. Any specific

difference is highlighted whenever it is needed.

Getting started with STEVAL-IDB007Vx, STEVAL-IDB008Vx and

STEVAL-IDB009Vx evaluation boards

UM2094

User manual

UM2094 - Rev 5 - November 2018

For further information contact your local STMicroelectronics sales office.

www.st.com

Downloaded from Arrow.com.

1Development platforms

Figure 1. STEVAL-IDB007V1 development platform

Figure 2. STEVAL-IDB007V2 development platform

Figure 3. STEVAL-IDB008V1 development platform

UM2094

Development platforms

UM2094 - Rev 5 page 2/14

Downloaded from Arrow.com.Downloaded from Arrow.com.

Figure 4. STEVAL-IDB008V2 development platform

Figure 5. STEVAL-IDB009V1 development platform

UM2094

Development platforms

UM2094 - Rev 5 page 3/14

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

2Acronyms and abbreviations

Table 1. List of acronyms

Acronym Description

BLE Bluetooth low energy

DK Development kit

SW Software

USB Universal serial bus

UM2094

Acronyms and abbreviations

UM2094 - Rev 5 page 4/14

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

3Getting started

The evaluation board is preprogrammed with sensor profile firmware (BLE_SensorDemo.hex) which allows to set

and establish a connection with a smartphone (iOS or Android) running a BlueNRG sensor application which

works with the sensor profile firmware running on the STEVAL-IDB007Vx, STEVAL-IDB008Vx or STEVAL-

IBD009Vx evaluation board.

The sensor profile firmware implements a proprietary Bluetooth profile which exposes two services: acceleration

and environmental service.

The acceleration service contains the following characteristics:

• Acceleration: it gives the current value of the acceleration detected by the MEMS sensor on the evaluation

board.

• Free fall characteristic: it allows detection of free-fall condition by the LSM6DS3 MEMS sensor on the

evaluation board (the condition is detected if the acceleration on the 3 axes is near zero for a certain amount

of time).

The environmental service contains characteristics that expose data from some environmental sensors, such as

temperature sensors.

3.1 Powering up the evaluation board running the sensor profile firmware

(peripheral role)

Two power options are available:

•Batteries - To power the selected evaluation board using batteries, 2 AAA batteries must be inserted into

the battery holder at the rear of the board, and jumper JP1 set to position 2-3 and jumper JP2 set to position

1-2 (Figure 6. Board power options).

•USB - To power the selected evaluation board through USB, jumper JP1 must be in position 1-2 and jumper

JP2 set to position 2-3 (Figure 6. Board power options ). Connect a USB cable to the micro-USB connector

(Figure 6. Board power options) and to a PC USB port.

Once powered, the evaluation board sensor profile firmware starts advertising, waiting for a smartphone to

connect to it.

UM2094

Getting started

UM2094 - Rev 5 page 5/14

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Figure 6. Board power options

3.2 Install the BlueNRG app for smartphones (central role)

• Two versions (Android and iOS) of the smartphone sensor application are available for download on the

specific web pages (Table 2. Reference information Android & iOS SensorApp).

• Install the smartphone SensorApp application on the selected smartphone.

3.3 Run BlueNRG app for smartphones

• Launch the BlueNRG SensorApp application on the smartphone

• It starts scanning for the BlueNRG sensor peripheral. A device called “BlueNRG” appears on the screen (this

is the STEVAL-IDB007Vx, STEVAL-IDB008Vx or STEVAL-IDB009Vx running the sensor profile firmware)

• Tap on the BlueNRG name to connect to the selected platform running the sensor profile firmware. The

BlueNRG SensorApp application enables notifications on the acceleration characteristic and displays the

received value on the screen.

UM2094

Install the BlueNRG app for smartphones (central role)

UM2094 - Rev 5 page 6/14

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Figure 7. Smartphone BlueNRG SensorApp acceleration notification

• Data from environmental sensors are also periodically read and displayed.

Figure 8. Smartphone BlueNRG SensorApp RSSI notifications

UM2094

Run BlueNRG app for smartphones

UM2094 - Rev 5 page 7/14

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

4Software demonstration applications

• In order to develop a software application for the STEVAL-IDB007Vx, STEVAL-IDB008Vx or STEVAL-

IDB009Vx evaluation board, it is recommended to start with the reference demonstration applications

provided within the BlueNRG-1_2 DK SW package for BlueNRG-1, BlueNRG-2 BLE stack v2.x family

(STSW-BLUENRG1-DK) available on the STEVAL-IDB007Vx, STEVAL-IDB008Vx, STEVAL-IDB009Vx web

pages, or the BlueNRG-1_V1 DK SW package for BlueNRG-1 BLE stack v1.x family (STSW-BNRG_V1-

DK), available on the STEVAL-IDB007Vx web page.

• Unzip the file, launch the related installer and follow installation steps.

• Wait for the package installation to complete.

• The Projects folder in DK SW package contains the available demonstration applications, IAR projects,

sources and header files.

• IAR Embedded Workbench for ARM (EWARM) tool is needed for building and downloading software

applications running on the BlueNRG-1, BlueNRG-2 microcontrollers.

Note: For a description of the available BlueNRG-1, BlueNRG-2 demonstration applications and supported platforms,

refer to BlueNRG-1, BlueNRG-2 development kits user manual available on the related web page. The

BLE_SensorDemo.hex prebuilt binary images for BlueNRG-1, BlueNRG-2 platforms are also provided within the

DK software package, in the Firmware folder.

Keil MDK-ARM and Atollic TrueStudio for ARM (GCC) toolchains projects are also available.

UM2094

Software demonstration applications

UM2094 - Rev 5 page 8/14

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

5References

Table 2. Reference information

What Where Description

BlueNRG-1 Bluetooth Low

Energy wireless System on

Chip

BlueNRG-1 BlueNRG-1 device web page

BlueNRG-2 Bluetooth Low

Energy wireless System on

Chip

BlueNRG-2 BlueNRG-2 device web page

Bluetooth Low Energy

Specification

https://www.bluetooth.org/en-us/specification/

adopted-specifications

Bluetooth Low Energy specification web

page

Smartphone Android 4.3

Sensor App

https://play.google.com/store/apps/details?

id=com.st.blunrg Android 4.3 BlueNRG Sensor App web page

Smartphone IoS Sensor App https://itunes.apple.com/us/app/bluenrg/

id705873549?l=it&ls=1&mt=8 IoS BlueNRG Sensor App web page

STSW-BLUENRG1-DK

STEVAL-IDB007V1, STEVAL-IDB007V2,

STEVAL-IDB008V1, STEVAL-IDB008V2 and

STEVAL-IDB009V1 web pages, Tools and

Software section

BlueNRG-1_2 DK SW package for

BlueNRG_1, BlueNRG-2 BLE stack v2.x

family, with reference demonstration

applications

STSW-BNRG_V1-DK STEVAL-IDB007V1 web page, Tools and

Software section

BlueNRG-1_V1 DK SW package for

BlueNRG-1 BLE stack v1.x family, with

reference demonstration applications

STEVAL-IDB007V1 BlueNRG-1, Evaluation Tools section STEVAL-IDB007V1 platform web page

STEVAL-IDB007V2 BlueNRG-1, Evaluation Tools section STEVAL-IDB007V2 platform web page

STEVAL-IDB008V1 BlueNRG-2, Evaluation Tools section STEVAL-IDB008V1 platform web page

STEVAL-IDB008V2 BlueNRG-2, Evaluation Tools section STEVAL-IDB008V2 platform web page

STEVAL-IDB009V1 BlueNRG-2, Evaluation Tools section STEVAL-IDB009V1 platform web page

UM2071

STEVAL-IDB007V1, STEVAL-IDB007V2,

STEVAL-IDB008V1, STEVAL-IDB008V2 and

STEVAL-IDB009V1 web pages

BlueNRG-1, BlueNRG-2 Development Kits

User Manual

UM2094

References

UM2094 - Rev 5 page 9/14

Revision history

Table 3. Document revision history

Date Revision Changes

14-Jul-2016 1 Initial release.

19-Dec-2016 2 Updated STEVAL-IDB007V1 Bluetooth® low energy evaluation board on the cover page.

23-Oct-2017 3

Added: reference to STEVAL-IDB008V1 BlueNRG-2 evaluation platform, reference to BlueNRG-1_2

DK SW package for BLE stack v2.x family and reference to BlueNRG-1_V1 DK SW package for

BLE stack v1.x family.

02-May-2018 4 Updated Introduction.

Added references to STEVAL-ID007V2 and STEVAL-IDB008V2 evaluation platforms.

27-Nov-2018 5

Updated title and Introduction.

Added Section 1 Development platforms and references to the STEVAL-IDB009V1 evaluation

platform (BlueNRG-2 QFN48 package).

UM2094

UM2094 - Rev 5 page 10/14

Andere Handbücher für STEVAL-IDB007V Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST EVALKITSTKNX Bedienungsanleitung

ST STM32429I-EVAL Bedienungsanleitung

ST STM3240G-EVAL Bedienungsanleitung

ST M24SR-DISCOVERY Bedienungsanleitung

ST STEVAL-ILH007V1 Bedienungsanleitung

ST STEVAL-STRKT01 Administratorhandbuch

ST STM32100B-EVAL Bedienungsanleitung

ST STEVAL-LVLP01 Bedienungsanleitung

ST EVALSP320SCPU Bedienungsanleitung

ST STR730-EVAL Bedienungsanleitung

ST STEVAL-BTDP1 Bedienungsanleitung

ST ST7 Series Bedienungsanleitung

ST EVALSPEAr320CPU Bedienungsanleitung

ST STEVAL-MKI005V1 Bedienungsanleitung

ST STM32CubeF4 Bedienungsanleitung

ST VIPower VIPer22A-E Montage- und Bedienungsanleitung

ST STM32L4P5G-DK Bedienungsanleitung

ST STSW-IDS002V1 Bedienungsanleitung

ST Nucleo STM32F302R8 Bedienungsanleitung

ST SPC58XXADPT292S Bedienungsanleitung

ST EVALSPEAr320PLC Bedienungsanleitung

ST EVAL-L9177A Bedienungsanleitung

ST STM3240G-EVAL Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung