ST SPC58XXADPT292S Bedienungsanleitung

Introduction

The evaluation board SPC58XXADPT292S Rev. C "mini module" supports STMicroelectronics SPC58XE84C3,

SPC57EM80C3, SPC58XG84C3 and SPC58XN84C3 microcontrollers in FPBGA292 package.

Figure 1. SPC58XXADPT292S Rev. C

Note: picture is not contractual.

SPC58XXADPT292S Rev. C evaluation board

UM2764

User manual

UM2764 - Rev 1 - January 2021

For further information contact your local STMicroelectronics sales office.

www.st.com

1Overview

The "mini module" is an evaluation board supporting STMicroelectronics SPC58XE84C3, SPC57EM80C3,

SPC58XG84C3 and SPC58XN84C3 microcontrollers in FPBGA292 package.

The "mini module" is designed to be connected onto the SPC58xxMB motherboard, offering a mechanism for

easy customer evaluation of the supported devices, and to facilitate hardware and software development.

The "mini module" may be used as a stand-alone unit allowing access to the CPU, but no access to the I/O pins

as any motherboard peripherals.

Figure 2. Overview of SPC58XXADPT292S Rev. C "mini module" - top

UM2764

Overview

UM2764 - Rev 1 page 2/26

Figure 3. Overview of SPC58XXADPT292S Rev. C "mini module" - bottom

1.1 Package contents

An SPC58XXADPT292S Rev. C adapter package includes the following item:

• SPC58XXADPT292S Rev. C "mini module"

1.2 Supported devices

The "mini module" supports the following STMicroelectronics family of microcontrollers in FPBGA292 package:

• SPC58XE84C3

• SPC57EM80C3

• SPC58XG84C3

• SPC58XN84C3

UM2764

Package contents

UM2764 - Rev 1 page 3/26

2License agreement

The packaging of this evaluation board was sealed with a seal stating, " by breaking this seal, you agree to the

terms and conditions of the evaluation board license agreement, the terms and conditions of which are available

at www.st.com/ebla ". Upon breaking the seal, you and STMicroelectronics entered into the evaluation board

license agreement, a copy of which is also enclosed with the evaluation board for convenience.

Attention: This evaluation board only offers limited features for evaluating ST products. It has not been tested for use

with other products and is not suitable for any safety or other commercial or consumer application. This

evaluation board is otherwise provided “AS IS” and STMicroelectronics disclaims all warranties, express or

implied, including the implied warranties of merchantability and fitness for a particular purpose.

UM2764

License agreement

UM2764 - Rev 1 page 4/26

3Handling precautions

Please take care to handle the package contents in a manner such as to prevent electrostatic discharge.

Before the EVB is used or power is applied, please fully read the following sections on how to correctly configure

the board. Failure to correctly configure the board may cause irreparable component, MCU or EVB damage.

UM2764

Handling precautions

UM2764 - Rev 1 page 5/26

4Hardware description

4.1 Hardware features

The "mini module" has the following features:

• Connector for external power supplies input (5 V, 3.3 V, 1.25 V) used in stand-alone mode.

• Reset button with driver and led indicator

• Socket for device in FPBGA292 package with exposed pad down

• Debug ports:

• – 34-pin SAMTEC connector for Nexus 2

– 14-pin header connector for JTAG port

– 10-pin header connector for SIPI interface

• 40 MHz crystal main oscillator with jumpers to optionally disconnect it

• 8 MHz oscillator with jumpers to optionally disconnect it

• Clock input through SMA connector to optionally disconnect it

• 2 X Samtec QSH series, 240 way connector to connect "mini module" to motherboard

4.2 Hardware dimension

The "mini module" has the following dimensions:

• PCB area: 127 mm X 114.3 mm

• Top components height: 19.4 mm max

• Bottom components height: 3.5 mm max

• PCB thickness: 1.6 mm

UM2764

Hardware description

UM2764 - Rev 1 page 6/26

5Power and system configuration

5.1 Power supplies

When the "mini module" is plugged onto the motherboard, power is supplied directly by the motherboard. In this

setup, the external power supply input available on the "mini module" should NOT be used.

When the "mini module" is used as a stand-alone board, external power supplies must be used (5 V, 3.3 V, 1.25

V).

The following jumpers are used to configure the power supply:

Table 1. Power configuration jumpers

Jumper Description Default Position

J1 VDD_HV_ADR voltage configuration

from 5.0V_LR or 3.3V_SR 1-2 (5.0V_LR) Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - B2

J2 VDD_HV_ADV voltage configuration

from 5.0V_LR or 3.3V_SR 1-2 (5.0V_LR) Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - B2

J3 VDD_HV_JTAG_OSC voltage

configuration from 5.0V_SR or 3.3V_SR 1-2 (5.0V_SR) Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - B2

J4 VDD_HV_PMC voltage configuration

from 5.0V_SR or 3.3V_SR 1-2 (5.0V_SR) Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - B2

J6 VDD_HV_IO_MAIN voltage

configuration from 5.0V_SR or 3.3V_SR 1-2 (5.0V_SR) Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - B2

J32 VDD_HV_IO_FLEX voltage

configuration from 5.0V_SR or 3.3V_SR 1-2 (5.0V_SR) Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - C2

J8 VDDPHYIO voltage configuration from

5.0V_SR or 3.3V_SR 1-2 (5.0V_SR) Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - C2

J9 VDD_LV_STBY voltage configuration

from 1.25V_SR or VDD_LV 1-2 (1.25V_SR) Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - C2

J35

VDD_LV voltage configuration from:

• BALLAST circuit

• 1.25V_SR

SMPS_REGULATOR_OUT

2-3 (1.25V_SR) Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - C4

J38

Supply for BALLAST circuit

configuration from VDD_HV_IO_MAIN

or 5.0V_SR

1-2

(VDD_HV_IO_MAIN)

Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - D2

UM2764

Power and system configuration

UM2764 - Rev 1 page 7/26

5.2 Microcolntroller configuration

The jumpers described in the following table needs to configure the board to use STMicroelectronics

microcontroller SPC57EM80C3.

Table 2. Microcontroller SPC57EM80C3 configuration related jumpers

Jumper Description Default Position

J33 Device ball T11 VDDSTBY

function configuration

2-3

(Connect VDDSTBY with

3.3_SR)

Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - C3

J34 Device ball N19 NC

function configuration

Open

(Device ball N19 Not Connected)

Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - C3

SW2

Device ball E15&D16

VDD_HV_FLA supply

configuration

2-3

(Disconnect VDD_HV_FLA from

VDD_HV_IO_MAIN)

Figure 5. SPC58XXADPT292S Rev. C bottom "mini

module" view - C2

The jumpers described in the following table need to configure the board to use STMicroelectronics

microcontrollers SPC58NE84C3, SPC58XG84C3 and SPC58XN84C3.

Table 3. SPC58NE84C3, SPC58XG84C3 and SPC58XN84C3 jumpers

Jumper Description Default Position

J33

Device ball T11 EXTREG_SEL

function configuration:

• 2-1 (DISABLE BALLAST)

• 2-4 (ENABLE BALLAST)

2-1 (DISABLE BALLAST) Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - C3

J34 Device ball N19 NC function

configuration

(Connect BCTRL with

BALLAST Circuit)

Figure 4. SPC58XXADPT292S Rev. C top "mini

module" view - C3

SW2

Device ball E15&D16

VDD_HV_FLA supply

configuration

2-1

(Connect VDD_HV_FLA with

VDD_HV_IO_MAIN)

Figure 5. SPC58XXADPT292S Rev. C bottom

"mini module" view - C2

UM2764

Microcolntroller configuration

UM2764 - Rev 1 page 8/26

5.3 Port configuration

The following jumper need to configure the ports:

Table 4. Ports related jumpers

Jumper Description Default Position

J30 TESTMODE settings Close Figure 4. SPC58XXADPT292S Rev. C top "mini module" view - C2

J11 PF[15]/EVTI connection to QSH

motherboard connectors Open Figure 4. SPC58XXADPT292S Rev. C top "mini module" view - A2

J31 PH[11]/EVTO connection to QSH

motherboard connectors Open Figure 4. SPC58XXADPT292S Rev. C top "mini module" view - A2

J12 PM[4]/EVTI0 connection to QSH

motherboard connectors Open Figure 4. SPC58XXADPT292S Rev. C top "mini module" view - C3

J13 PM[5]/EVTO0 connection to QSH

motherboard connectors Open Figure 4. SPC58XXADPT292S Rev. C top "mini module" view - C3

J14 PM[6]/EVTO1 connection to QSH

motherboard connectors Open Figure 4. SPC58XXADPT292S Rev. C top "mini module" view - C3

J15 PK[14]/EVTI1 connection to QSH

motherboard connectors Open Figure 4. SPC58XXADPT292S Rev. C top "mini module" view - C3

UM2764

Port configuration

UM2764 - Rev 1 page 9/26

5.4 System clock configuration

The "mini module" supports the usage of crystal clock sources as well as external clock source:

Table 5. Clock configuration jumpers

Jumper Description Default Position

J21 40 MHz crystal clock source Enable

for pin EXTAL 1-2 (XT1 pin2) Figure 4. SPC58XXADPT292S Rev. C top "mini module"

view - C3

J23 40 MHz crystal clock source Enable

for pin XTAL 1-2 (XT1 pin1) Figure 4. SPC58XXADPT292S Rev. C top "mini module"

view - C3

J22 Enable 8 MHz oscillator power

supply Open Figure 4. SPC58XXADPT292S Rev. C top "mini module"

view - D3

J24 External clock source from 8 MHz

oscillator or SMA connector

1-2 (8 MHz

oscillator)

Figure 4. SPC58XXADPT292S Rev. C top "mini module"

view - D3

5.5 Reset circuit

The "mini module" supports different ways to reset the microcontroller.

To use and perform the reset driving there are different jumpers and switches:

Table 6. Reset configuration jumpers

Jumper Description Default Position

SW1 Reset push button Open Figure 4. SPC58XXADPT292S Rev. C top "mini module" view -

J27

Connect the external reset to the reset

driver for

ESR0 and PORST pins

Close Figure 4. SPC58XXADPT292S Rev. C top "mini module" view -

J25 Connect the external reset to ESR0

pin Close Figure 4. SPC58XXADPT292S Rev. C top "mini module" view -

J26 Connect the external reset to PORST

pin Close Figure 4. SPC58XXADPT292S Rev. C top "mini module" view -

UM2764

System clock configuration

UM2764 - Rev 1 page 10/26

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST NUCLEO-8S207K8 Bedienungsanleitung

ST STM32H5 Bedienungsanleitung

ST STM3210C-EVAL Bedienungsanleitung

ST STM32439I-EVAL Bedienungsanleitung

ST STM3241G-EVAL Bedienungsanleitung

ST STM32 NUCLEO-F042K6 Bedienungsanleitung

ST PowerSTEP01 EVLPOWERSTEP01 Bedienungsanleitung

ST L9678-S-EVB Bedienungsanleitung

ST EVAL-L9963-MCU Montage- und Bedienungsanleitung

ST STM3241G-EVAL Bedienungsanleitung

ST STA304 Bedienungsanleitung

ST STM3220G-EVAL Bedienungsanleitung

ST STEVAL-SMARTAG2 Bedienungsanleitung

ST STEVAL-L6982CDR Bedienungsanleitung

ST STM32429I-EVAL Bedienungsanleitung

ST STEVAL-IFS012V1 Bedienungsanleitung

ST STEVAL-IDB007V Series Bedienungsanleitung

ST SPC5-UDESTK Bedienungsanleitung

ST NUCLEO-H745ZI-Q Bedienungsanleitung

ST STM32L152-EVAL Montage- und Bedienungsanleitung

ST ST9 Series Bedienungsanleitung

ST EVAL-L9960 Bedienungsanleitung

ST STEVAL-BTDP1 Bedienungsanleitung

ST STM32L152-EVAL Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung