ST STEVAL-IDB007V1 Bedienungsanleitung

July 2016

DocID029565 Rev 1

1/12

www.st.com

UM2094

User manual

STEVAL-IDB007V1 evaluation board quick start guide

Introduction

The STEVAL-IDB007V1 is an evaluation board based on BlueNRG-1, a low power Bluetooth®Smart

System on Chip that is compliant with the Bluetooth®v4.1 specification and supports both master and

slave roles.

Figure 1: STEVAL-IDB007V1 Bluetooth® low energy evaluation board

Contents

UM2094

2/12

DocID029565 Rev 1

Contents

1Getting started.................................................................................5

1.1 Powering up STEVAL-IDB007V1 evaluation board running the

sensor profile firmware (peripheral role).........................................................5

1.2 Install the BlueNRG app for smartphones (central role)....................6

1.3 Run BlueNRG app for smartphones..................................................6

2SW demonstration applications.....................................................8

3References.......................................................................................9

4List of acronyms............................................................................10

5Revision history ............................................................................11

UM2094

List of tables

DocID029565 Rev 1

3/12

List of tables

Table 1: Reference information ..................................................................................................................9

Table 2: List of acronyms used in the document......................................................................................10

Table 3: Document revision history ..........................................................................................................11

List of figures

UM2094

4/12

DocID029565 Rev 1

List of figures

Figure 1: STEVAL-IDB007V1 Bluetooth® low energy evaluation board....................................................1

Figure 2: STEVAL-IDB007V1 power options..............................................................................................6

Figure 3: Smartphone BlueNRG SensorApp acceleration notification.......................................................7

Figure 4: Smartphone BlueNRG SensorApp RSSI notifications ................................................................7

UM2094

Getting started

DocID029565 Rev 1

5/12

1 Getting started

The evaluation board is preprogrammed with sensor profile firmware

(BLE_SensorDemo.hex) which allows to set and establish a connection with a smartphone

(iOS or Android) running a BlueNRG sensor application which works with the sensor profile

firmware running on the STEVAL-IDB007V1 evaluation board.

The sensor profile firmware implements a proprietary Bluetooth profile which exposes two

services: acceleration and environmental service.

The acceleration service contains the following characteristics:

Acceleration: it gives the current value of the acceleration detected by the MEMS

sensor on the STEVAL-IDB007V1 board.

Free fall characteristic: it allows detection of free-fall condition by the LSM6DS3

MEMS sensor on the STEVAL-IDB007V1 board (the condition is detected if the

acceleration on the 3 axes is near zero for a certain amount of time).

The environmental service contains characteristics that expose data from some

environmental sensors, such as temperature sensors.

1.1 Powering up STEVAL-IDB007V1 evaluation board running

the sensor profile firmware (peripheral role)

Two power options are available:

Batteries - To power the STEVAL-IDB007V1 evaluation board using batteries, 2 AAA

batteries must be inserted into the battery holder at the rear of the board, and jumper

JP1 set to position 2-3 and jumper JP2 set to position 1-2 (Figure 2: "STEVAL-

IDB007V1 power options").

USB - To power the STEVAL-IDB007V1 evaluation board through USB, jumper JP1

must be in position 1-2 and jumper JP2 set to position 2-3 (Figure 2: "STEVAL-

IDB007V1 power options" ). Connect a USB cable to the micro-USB connector (Figure

2: "STEVAL-IDB007V1 power options") and to a PC USB port.

Once powered, the STEVAL-IDB007V1 sensor profile firmware starts advertising, waiting

for a smartphone to connect to it.

Getting started

UM2094

6/12

DocID029565 Rev 1

Figure 2: STEVAL-IDB007V1 power options

1.2 Install the BlueNRG app for smartphones (central role)

Two versions (Android and iOS) of the smartphone sensor application are available for

download on the specific web pages (Table 1: "Reference information"Android & iOS

SensorApp).

Install the smartphone SensorApp application on the selected smartphone.

1.3 Run BlueNRG app for smartphones

Launch the BlueNRG SensorApp application on the smartphone

It starts scanning for the BlueNRG sensor peripheral. A device called “BlueNRG”

appears on the screen (this is the STEVAL-IDB007V1 running the sensor profile

firmware)

Tap on the BlueNRG name to connect to the STEVAL-IDB007V1 running the sensor

profile firmware. The BlueNRG SensorApp application enables notifications on the

acceleration characteristic and displays the received value on the screen.

UM2094

Getting started

DocID029565 Rev 1

7/12

Figure 3: Smartphone BlueNRG SensorApp acceleration notification

Data from environmental sensors are also periodically read and displayed.

Figure 4: Smartphone BlueNRG SensorApp RSSI notifications

SW demonstration applications

UM2094

8/12

DocID029565 Rev 1

2 SW demonstration applications

In order to develop a software application for the STEVAL-IDB007V1 evaluation

board, it is recommended to start with the reference demonstration applications

provided within the BlueNRG-1 DK software package (STSW-BLUENRG1-DK)

available on the STEVAL-IDB007V1 web page.

Unzip the file, launch the related installer and follow installation steps (the default

installation path is C:\\Program Files (x86)\\STMicroelectronics\\BlueNRG-1 DK x.x.x)

Wait for the package installation to complete.

The Projects folder in BlueNRG-1 DK SW package contains the available BlueNRG-1

demonstration applications, IAR projects, sources and header files.

IAR Embedded Workbench for ARM (EWARM) tool is needed for building and

downloading software applications running on the BlueNRG-1 microcontroller.

For a description of the available BlueNRG-1 demonstration applications and

supported platforms, refer to BlueNRG-1 development kits user manual available

on the related web page. The BLE_SensorDemo.hex prebuilt binary image is also

provided within the BlueNRG-1 DK software package, in the Firmware folder.

Keil MDK-ARM and Atollic TrueStudio for ARM (GCC) toolchains projects are also

available.

UM2094

References

DocID029565 Rev 1

9/12

3 References

Table 1: Reference information

What

Where

Description

BlueNRG-1 Bluetooth

Low Energy wireless

System on Chip

www.st.com/bluenrg-1

BlueNRG-1 device web

page

Bluetooth Low Energy

Specification

https://www.bluetooth.org/en-

us/specification/adopted-specifications

Bluetooth Low Energy

specification web page

Smartphone Android 4.3

Sensor App

https://play.google.com/store/apps/detai

ls?id=com.st.blunrg

Android 4.3 BlueNRG

Sensor App web page

Smartphone IoS Sensor

App

https://itunes.apple.com/us/app/bluenrg/

id705873549?l=it&ls=1&mt=8

IoS BlueNRG Sensor App

web page

STSW-BLUENRG1-DK

STEVAL-IDB007V1 web page, Tools

and Software section

BlueNRG-1 DK SW

package with reference

demonstration applications

STEVAL-IDB007V1

www.st.com/bluenrg-1, Evaluation

Tools section

STEVAL-IDB007V1

platform web page

List of acronyms

UM2094

10/12

DocID029565 Rev 1

4 List of acronyms

Table 2: List of acronyms used in the document

Term

Meaning

BLE

Bluetooth Low Energy

Development kit

Software

USB

Universal serial bus

Inhaltsverzeichnis

Andere ST Hauptplatine Handbücher

ST STM3221G-EVAL Bedienungsanleitung

ST STEVAL-IPC002V1 Bedienungsanleitung

ST UM1682 Bedienungsanleitung

ST STM3220G-EVAL Bedienungsanleitung

ST X-NUCLEO-S2868A1 Bedienungsanleitung

ST STEVAL-PCC008V1 Bedienungsanleitung

ST STM32 NUCLEO-F042K6 Bedienungsanleitung

ST STEVAL-PCC010V1 Bedienungsanleitung

ST STEVAL-L6982CDR Bedienungsanleitung

ST EVAL-L9963-MCU Montage- und Bedienungsanleitung

ST STM32 Nucleo-64-P Series Bedienungsanleitung

ST AEKD-AICAR1 Bedienungsanleitung

ST SPC560D-DIS Bedienungsanleitung

ST STM8L1526-EVAL Bedienungsanleitung

ST STEVAL-PCC008V1 Bedienungsanleitung

ST UM0804 Bedienungsanleitung

ST STM32303C-EVAL Bedienungsanleitung

ST X-NUCLEO-IDB05A1 Bedienungsanleitung

ST STM8L1528-EVAL Bedienungsanleitung

ST STEVAL-IFS001V1 Bedienungsanleitung

ST EVAL-L99ASC03 Bedienungsanleitung

ST X-NUCLEO-IDB04A1 Bedienungsanleitung

ST SGS-Thomson ST624x-KIT Series Bedienungsanleitung

ST STUSB02E Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung