Stamina Viper VG1500 Bedienungsanleitung

50-3000

STAMINA PRODUCTS

MADE IN CHINA

Product May Vary Slightly

From Pictured.

2007, 10

Exercise can present a health

risk. Consult a physician

before beginninganyexercise

program with this equipment.

If you feel faint or dizzy,

immediately discontinue use

of this equipment. Serious

bodily injury can occur if this

equipment is not assembled

and used correctly. Serious

bodily injury can also occur if

all instructions are not

followed. Keep others and

pets away from equipment

when in use. Always make

sure all bolts and nuts are

tightened prior to each use.

Followallsafety instructionsin

this manual.

When calling for parts or

service, please specify the

following number.

WARNING

CAUTION:

Weight on this product should not exceed 300 lbs.

2007 Stamina Products, Inc.

2040 N. Alliance, Springfield, MO 65803

Customer Service Number

1 (800) 375-7520

www.staminaproducts.com

This Product is Produced Exclusively by

Owner's Manual

TABLE OF CONTENTS

Warm-up and Cool-Down 16

Warranty 17

Product Parts Drawing 18

Parts List 19

Notes 21

Fax/Mail Ordering Form 22

Page Page

Safety Instructions 2

Before You Begin 4

Hardware Identification Chart 5

Assembly Instructions 6

Setting up The Accessories 14

Storage 15

Maintenance 15

WARNING: Before starting any exercise or conditioning program you should consult with your personal

physician to see if you require a complete physical exam. This is especially important if you

are over the age of 35, have never exercised before, are pregnant, or suffer from any

illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW

THESE INSTRUCTIONS CAN RESULT IN SERIOUS BODILY INJURY.

SAFETY INSTRUCTIONS

WARNING:

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

Read all warnings posted on the VG1500TM Leverage System.

Read this Owner's Manual and follow it carefully before using the VG1500TM Leverage System.

Make sure that it is properly assembled and tightened before use.

We recommend that two people be available for assembly of this product.

Keep children and pets away from the VG1500TM Leverage System. Do not allow children to use or

play on the VG1500TM Leverage System.

It is recommended that you place this exercise equipment on an equipment mat.

Set up and operate the VG1500TM Leverage System on a solid level surface. Do not position the

VG1500TM Leverage System on loose rugs or uneven surfaces.

Make sure that adequate space is available for access to and around the VG1500TM Leverage

System.

Prior to each use, check the condition of the cables. Replace the cables if the coatings are cracked

or broken.

Prior to each use, verify that the cables are properly installed on the pulleys.

Inspect the VG1500TM Leverage System for worn or loose components prior to use. Make sure that

all bolts and nuts are tight.

Consult a physician prior to commencing an exercise program. If at any time during exercise you

feel faint, dizzy, or experience pain, stop and consult your physician.

Follow your physician's recommendations in developing your own personal fitness program.

Always choose the workout which best fits your physical strength and flexibility level. Know your

limits and train within them. Always use common sense when exercising.

Do not wear loose or dangling clothing while using the VG1500TM Leverage System.

Never exercise in bare feet or socks; always wear correct footwear, such as running, walking, or

crosstraining shoes. Be sure that they fit well, provide foot support and feature non-skid rubber soles.

Care should be taken in mounting or dismounting the VG1500TM Leverage System.

The VG1500TM Leverage System should not be used by persons weighing over 300 pounds.

The VG1500TM Leverage System should be used by only one person at a time.

The VG1500TM Leverage System is for consumer use only. It is not for use in public or semipublic

facilities.

To reduce the risk of serious injury, read the following Safety Instructions before

using the VIPER VG1500TM Leverage System.

THANK YOU FOR PURCHASING THE

VIPER VG1500TM Leverage System

Should you have any questions,

please call our Customer Service Department toll-free number,

1 (800) 375-7520

Monday - Thursday, 7:30 A.M. - 5:00 P.M. Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

TELEPHONE

CUSTOMER SERVICE

Tel: 1 (800) 375-7520

FAX

CUSTOMER SERVICE

Fax: (417) 889-8064

MAIL

STAMINA PRODUCTS, INC.

ATTN: Customer Service

P.O. Box 1071

Springfield, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

parts@staminaproducts.com

cust-srvc@staminaproducts.com

www.staminaproducts.com

CALL US FIRST

Your VIPER VG1500TM Leverage System does require assembly.

Please follow the assembly steps set forth in this manual.

Within a short time you will be getting your body into shape and

on your way to a achieving a healthier lifestyle.

Lat Bar

Cable

Back Cushion

Foam Roller

Leg Lift

Left Handlebar

Lever Arm

Foam Roller

Ankle Cuff

Base Frame

Seat Cushion

Upright

Long Chain

THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY :

Straight Bar

Handle

Left Leverage Arm

Lower Upright

BEFORE YOU BEGIN

Thank you for choosing the VG1500TM Leverage

System. Wetakegreatpride inproducing this quality

productand hopeit willprovide manyhoursofquality

exercisetomakeyoufeelbetter,lookbetterandenjoy

life to its fullest.

Yes, it's a proven fact that a regular exercise

program can improve your physical and mental

health. Too often, our busy lifestyles limit our time

and opportunitytoexercise.The VG1500TM Leverage

System provides a convenient and simple method

to begin your assault on getting your body in shape

and achieving a happier and healthier lifestyle.

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled.

Read this manual carefully before using the

VG1500TM Leverage System.

Although Stamina constructs its products with the

finest materials and uses the highest standards of

manufacturing and quality control, there can

sometimes be missing parts or incorrectly sized

parts. If you have any questions or problems with

the parts included with your VG1500TM Leverage

System, please do not return the product. Contact

us FIRST!

If a part is missing or defective, please call us toll

free at 1-800-375-7520 (in the U.S.). Our Customer

ServiceStaffis availableto assistyoufrom 7:30A.M.

to5:00P.M.(CentralTime)MondaythroughThursday

and 8:00A.M. to 3:00 P.M. (Central Time) on Friday.

If you would like to contact us online, go to our

websiteatwww.staminaproducts.comand accessthe

Customer Service section.

Be sure to have the name and model number of

the product available when you contact us.

Head Rest

Rear Stabilizer

Right Leverage Arm

Foot Plate

300 lbs Weight

Limit Notice Decal

( both sides )

Adjustable Wrench (two required, not included)

Allen Wrench (4mm) (two pieces included)

Lat Bar Warning Label

Lever Arm

Right Weight Bar

400 lbs Weight Limit Notice Decal

Warning Label

Lat Bar Warning Label

Ab Curl Strap

Part No. and Description Qty

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the assembly process. Place the washers, the

end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the

length of the bolts and screws.

NOTICE: The length of all bolts and screws except those with flat heads is

measured from below the head to the end of the bolt or screw.

Flat head bolts and screws are measured from the top of the

head to the end of the bolt or screw.

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

length

After unpacking the unit, open the hardware bag and make sure that you have all the following items.

Some hardware may be already attached to the part.

82 Nylock Nut (M12 x1.75) 25

83 Nylock Nut (M10 x1.5) 8

65 Bolt, Socket Head (M6 x 1 x 20mm) 2

64 Bolt, Button Head (M6 x 1 x 10mm) 2

67 Bolt, Hex Head (M10 x 1.5 x 25mm) 10

71 Bolt, Hex Head (M12 x 1.75 x 20mm) 6

68 Bolt, Hex Head (M10 x 1.5 x 50mm) 4

69 Bolt, Hex Head (M10 x 1.5 x 70mm) 1

70 Bolt, Hex Head (M10 x 1.5 x 95mm) 3

72 Bolt, Hex Head (M12 x 1.75 x 70mm) 5

73 Bolt, Hex Head (M12 x 1.75 x 80mm) 7

74 Bolt, Hex Head (M12 x 1.75 x 90mm) 2

75 Bolt, Hex Head (M12 x 1.75 x 100mm) 4

76 Bolt, Hex Head (M12 x 1.75 x 110mm) 2

77 Bolt, Hex Head (M12 x 1.75 x 160mm) 2

79 Large Washer (M12 x ø31mm) 4

80 Washer (M12 x ø25mm) 45

81 Washer (M10) 26

78 Arc Washer (M12) 4

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all

packing materials from your area and place them back into the box. Do not dispose of the packing materials

until assembly is completed. Read each step carefully before beginning. If you are missing a part please

call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: parts@staminaproducts.com

STEP 1

Attach the FOOT PLATE(4) to the BASE FRAME(1) with the SHAFT(42) and BUTTON HEAD BOLTS

(M6x1x10mm)(64).

STEP 2

Refertothe illustration. BolttheBASE FRAME(1),REAR STABILIZER(2), andREAR SUPPORT(3) together

withHEX BOLTS(M12x1.75x110mm)(76),ARC WASHERS(M12)(78), andNYLOCKNUTS(M12x1.75)(82).

Do not tighten the bolts until STEP 3.

FRONT

REAR

ASSEMBLY INSTRUCTIONS

STEP 3

Attach the LOWER UPRIGHT(6) to the BASE FRAME(1) with the SUPPORT BRACKET(5), HEX BOLTS

(M12x1.75x70mm)(72), WASHERS(M12)(80), andNYLOCK NUTS(M12x1.75)(82). Donot tightenthebolts.

Attach the LOW UPRIGHT(6) to the REAR STABILIZER(2) with HEX BOLTS(M12x1.75x70mm)(72),

WASHERS(M12)(80), and NYLOCK NUTS(M12x1.75)(82). Tighten all bolts, including the bolts for

STEP 2.

STEP 4

AttachtheLEVER ARM(8) totheLOWER UPRIGHT(6) withHEX BOLT(M12x1.75x80mm)(73),WASHERS

(M12)(80), and NYLOCKNUT(M12x1.75)(82). Do not over tighten the bolt, as the LEVERARM(8) must be

able to pivot smoothly.

STEP 5

Slide the WEIGHT COLLARS(84) onto both sides of the LEVER ARM(8) and lock in position with the

LOCKING KNOBS(85).

FRONT

REAR

ASSEMBLY INSTRUCTIONS

STEP 6: Run the SMALL BALL END ofthe CABLE(45) throughthe slotat thetop endof theUPRIGHT(7).

Attach the CABLE(45) to the UPRIGHT(7) at "A" with the LARGE PULLEY(44), a HEX BOLT

(M10x1.5x95mm)(70), two WASHERS(M10)(81), and a NYLOCK NUT(M10x1.5)(83).

Run the CABLE(45) through the pulley bracket on the UPRIGHT(7) at "B". Attach the CABLE(45) to the

pulley bracket with a PULLEY(43), a HEX BOLT(M10x1.5x50mm)(68), two WASHERS(M10)(81), and a

NYLOCK NUT(M10x1.5)(83).

NOTE: Do not over tighten HEX BOLTS(68, 70) as PULLEYS(43, 44) must rotate freely after HEX BOLTS

(68, 70) are tightened.

Small Ball End

Large Ball End

STEP 7: Insert the UPRIGHT(7) into the LOWER UPRIGHT(6). Do not attach the bolts yet. Attach the

CABLE(45) to the pulley bracket on the LEVER ARM(8) at "C" with a PULLEY(43), a HEX BOLT

(M10x1.5x50mm)(68), two WASHERS(M10)(81), and a NYLOCK NUT(M10x1.5)(83).

Run the CABLE(45) through the UPRIGHT(7) and LOWER UPRIGHT(6). Attach the CABLE(45) to the

pulley bracket at "D" with a PULLEY(43), a HEX BOLT(M10x1.5x95mm)(70), two WASHERS(M10)(81),

and a NYLOCK NUT(M10x1.5)(83). Repeat at position "E".

Attach the CABLE(45) to the Bracket at "F" with a PULLEY(43), a HEX BOLT(M10x1.5x50mm)(68), two

WASHERS(M10)(81), and a NYLOCK NUT(M10x1.5)(83).

STEP 8: Secure the UPRIGHT(7) to the LOWER UPRIGHT(6) with HEX BOLTS(M12x1.75x20mm)(71)

and WASHERS(M12)(80).

FRONT

REAR

ASSEMBLY INSTRUCTIONS

STEP 9

Refer to the inset drawing.Attach the SLIDER SUPPORT(14) to the LOWER UPRIGHT(6) with HEX BOLT

(M12x1.75x160mm)(77), WASHERS(M12)(80), and NYLOCK NUT(M12x1.75)(82). Do not over tighten

the bolt, as the SLIDER SUPPORT(14) must be able to pivot smoothly.

STEP 10

Pull the SPRING PIN(34) on the SLIDER SUPPORT(14). Then insert the ADJUSTMENT BAR(13) into the

SLIDER SUPPORT(14) and lock in the top adjustment hole with the SPRING PIN(34).

STEP 11

NOTE: Donot overtighten theBOLTS(74, 77), as theBACK SUPPORT(12) must be ableto pivotsmoothly.

Attach the BACK SUPPORT(12) to the LOWER UPRIGHT(6) with HEX BOLT(M12x1.75x90mm)(74),

WASHERS(M12)(80), and NYLOCK NUT(M12x1.75)(82). Attach the BACK SUPPORT(12) to the

ADJUSTMENT BAR(13) with HEX BOLT(M12x1.75x160mm)(77), WASHERS(M12)(80), and NYLOCK

NUT(M12x1.75)(82).

BACK VIEW

ASSEMBLY INSTRUCTIONS

STEP 12

Attach the SEAT FRAME(9) to the LOWER UPRIGHT(6) with HEX BOLTS(M12x1.75x100mm)(75),

WASHERS(M12)(80), and NYLOCKNUTS(M12x1.75)(82).

STEP 13

Attach the LEG LIFT(10) to the SEAT FRAME(9) with HEX BOLT(M12x1.75x90mm)(74), WASHERS

(M12)(80), and NYLOCK NUT(M12x1.75)(82).

STEP 14

Run the CABLE(45) through the slot in the LEG LIFT(10). Attach the CABLE(45) to the LEG LIFT(10) with

a PULLEY(43), a BOLT(M10x1.5x60mm)(69), two WASHERS(M10)(81), and a NYLOCK NUT(M10x1.5)

(83).

STEP 15

Refer to the illustration. Attach the ARM BRACE(16) to the LOWER UPRIGHT(6) with two HEX

BOLTS(M12x1.75x80mm)(73), a HEX BOLT(M12x1.75x70mm)(72), WASHERS(M12)(80), andNYLOCK

NUTS(M12x1.75)(82).

FRONT

REAR

Andere Handbücher für Viper VG1500

Inhaltsverzeichnis

Andere Stamina Heim-Fitnessstudio Handbücher

Stamina

Stamina 55-1532 Bedienungsanleitung

Stamina

Stamina BODYTRAC GLIDER 1060 Bedienungsanleitung

Stamina

Stamina X EXTREME TRAINING Series Bedienungsanleitung

Stamina

Stamina 55-6100U Bedienungsanleitung

Stamina

Stamina 1110 Bedienungsanleitung

Stamina

Stamina 20-2018 Bedienungsanleitung

Stamina

Stamina BAND flex GYM LT-2000 Bedienungsanleitung

Stamina

Stamina 1333 Precision Power Bedienungsanleitung

Stamina

Stamina 35-1102AR Bedienungsanleitung

Stamina

Stamina 35-1052A Bedienungsanleitung

Stamina

Stamina ATS AIR POWER 1402 Bedienungsanleitung

Stamina

Stamina 1405 Air Rower Bedienungsanleitung

Stamina

Stamina AeroPilates Premier 690 Bedienungsanleitung

Stamina

Stamina Hyperextension Bench 2014 Bedienungsanleitung

Stamina

Stamina X Water Rower 35-1442 Bedienungsanleitung

Stamina

Stamina Active Aging EasyRow Bedienungsanleitung

Stamina

Stamina ATS Air Rower 1406 Bedienungsanleitung

Stamina

Stamina DT Plus Power Bedienungsanleitung

Stamina

Stamina 1130 Bedienungsanleitung

Stamina

Stamina AeroPilates Performer XP615 Bedienungsanleitung

Stamina

Stamina 1750 Power Tower System Bedienungsanleitung

Stamina

Stamina inLINE 55-1401 Bedienungsanleitung

Stamina

Stamina inLINE Back Stretch Bench Bedienungsanleitung

Stamina

Stamina 35-1412 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Weider

Weider 8300 Hard Drive Bedienungsanleitung

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Weider

Weider 8700 I Kurzanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Weider

Weider WEMC10161 Bedienungsanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

ParaBody

ParaBody 40 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung

Insportline

Insportline RW600 Bedienungsanleitung