Stanley STHT77498-1 Bedienungsanleitung
STHT77498-1 & STHT77499-1
Self-Leveling Cross-line Laser
Please read these instructions before operating the product.
www.2helpU.com
DOC100270398
GB
NL
GR
I
FIN
HU
BG
LV
D
DK
CZ
ES
NO
SK
RO
LT
F
SE
RU
PT
PL
SI
EE
TR
HR
123
2
Figures
A
3
C
B
1/4-20
4
Figures
D
1
2
45
90
1
3
5
2
E
1
2
6
Figures
F
G
7
8
GB Contents
• Laser Information
• User Safety
• Battery Safety
• Installing AA Batteries
• Turning the Laser On
• Checking Laser Accuracy
• Using the Laser
• Maintenance
• Troubleshooting
• Service and Repairs
Laser Information
The STHT77498-1 and STHT77499-1 lasers are Class
2 laser products. The lasers are self-leveling laser
tools that can be used for horizontal (level) and vertical
(plumb) alignment projects.
User Safety
Safety Guidelines
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
If you have any questions or comments about this
or any STANLEY® tool, go to
http://www.STANLEY.com.
WARNING:
Read and understand all instructions.
Failure to follow the warnings and
instructions in this manual may result in
serious personal injury.
SAVE THESE INSTRUCTIONS
WARNING:
Laser Radiation Exposure. Do not
disassemble or modify the laser level.
There are no user serviceable parts
inside. Serious eye injury could result.
WARNING:
Hazardous Radiation. Use of controls or
adjustments, or performance of procedures,
in hazardous radiation exposure.
Symbol Meaning
V Volts
mW
Laser Warning
nm Wavelength in nanometers
2 Class 2 Laser
Warning Labels
For your convenience and safety, the following
labels are on your laser.
WARNING: To reduce the risk of
injury, user must read instruction
manual.
WARNING: LASER RADIATION. DO
NOT STARE INTO BEAM. Class 2
Laser Product.
9
GB
• Do not operate the laser in explosive
atmospheres, such as in the presence of
This tool may
create sparks which may ignite the dust or fumes.
• Store an idle laser out of reach of children and
other untrained persons. Lasers are dangerous in
the hands of untrained users.
•
repair personnel. Service or maintenance
injury. To locate your nearest Stanley service center
go to http://www.2helpU.com.
• Do not use optical tools such as a telescope or
transit to view the laser beam. Serious eye injury
could result.
• Do not place the laser in a position which may
cause anyone to intentionally or unintentionally
stare into the laser beam. Serious eye injury
could result.
•
anyone’s eyes. Serious eye injury could result.
• Turn the laser off when it is not in use. Leaving
the laser on increases the risk of staring into the
laser beam.
• Do not modify the laser in any way. Modifying
the tool may result in hazardous laser radiation
exposure.
• Do not operate the laser around children or
allow children to operate the laser. Serious eye
injury may result.
• If labels
are removed, the user or others may inadvertently
expose themselves to radiation.
• Position the laser securely on a level surface. If
the laser falls, damage to the laser or serious injury
could result.
Personal Safety
• Stay alert, watch what you are doing, and use
common sense when operating the laser. Do not
use the laser when you are tired or under the
of inattention while operating the laser may result in
serious personal injury.
• Use personal protective equipment. Always wear
eye protection. Depending on the work conditions,
wearing protective equipment such as a dust
mask, non-skid safety shoes, hard hat, and hearing
protection will reduce personal injury.
Tool Use and Care
• Do not use the laser if the Power/Transport Lock
switch does not turn the laser on or off. Any tool that
cannot be controlled with the switch is dangerous
and must be repaired.
Follow instructions in the Maintenance section of this
manual. Use of unauthorized parts or failure to follow
Maintenance instructions may create a risk of electric
shock or injury.
Battery Safety
WARNING:
Batteries can explode, or leak, and can
To reduce this risk:
• Carefully follow all instructions and warnings on the
battery label and package.
• Always insert batteries correctly with regard to
polarity (+ and –), as marked on the battery and
the equipment.
• Do not short battery terminals.
• Do not charge disposable batteries.
• Do not mix old and new batteries. Replace all
batteries at the same time with new batteries of the
same brand and type.
• Remove dead batteries immediately and dispose of
per local codes.
•
• Keep batteries out of reach of children.
• Remove batteries when the device is not in use.
10
GB Installing AA Batteries
STHT77499-1 laser.
1.
2. On the bottom of the laser, lift up the latch to
(Figure B 1).
3.
batteries, making sure to position the - and +
compartment (Figure B 2).
4.
it snaps in place (Figure B 3).
When
(Figure A 2.
Turning the Laser On
1. ,
º position).
2. horizontal and
vertical laser beams. Either:
•
the cross beams in manual mode
(Figure A 1).
• Move the to the
cross beams in self-leveling mode
(Figure A 3).
3. Check the horizontal and vertical laser beams.
• If the laser is tilted so much that it cannot self-
level (> 4°), or the laser is not level in manual
• the laser is not level
(or plumb) and should NOT BE USED for
repositioning the laser on a level surface.
4.
a project.
•
temperatures).
•
•
Checking Laser Accuracy
It is
check (in
• closest
to the operating distance
the laser.
•
that is level in both directions.
• Mark the center of the laser beam.
Horizontal Beam - Scan Direction
Checking the horizontal scan calibration of the
is important to conduct a calibration check using
a distance no shorter than the distance of the
1.
(Figure D 1).
2. Move the
right (Figure A 3) to turn the laser ON in
vertical beams.
3. Turn the laser 45º
.
Andere Handbücher für STHT77498-1
2
Dieses Handbuch passt für folgende Modelle
1
Andere Stanley Laser-Nivelliergerät Handbücher
Stanley
Stanley IntelliLaser Pro Bedienungsanleitung
Stanley
Stanley PB-5 Bedienungsanleitung
Stanley
Stanley FatMaxSP5 Bedienungsanleitung
Stanley
Stanley SP5 Bedienungsanleitung
Stanley
Stanley FCL-G Bedienungsanleitung
Stanley
Stanley TLM30 Bedienungsanleitung
Stanley
Stanley STHT77512-1 Bedienungsanleitung
Stanley
Stanley CL2XTi Bedienungsanleitung
Stanley
Stanley MultiLine 1-77-122 Bedienungsanleitung
Stanley
Stanley FatMax PB2 Bedienungsanleitung
Stanley
Stanley SLP3 Einrichtungshandbuch
Stanley
Stanley FatMax FMHT1-77414 Bedienungsanleitung
Stanley
Stanley FATMAX FMHT1-77416 Bedienungsanleitung
Stanley
Stanley STHT77502-1 Bedienungsanleitung
Stanley
Stanley FatMax FMHT77598 Bedienungsanleitung
Stanley
Stanley SLP3 Bedienungsanleitung
Stanley
Stanley FatMax-CL2 Bedienungsanleitung
Stanley
Stanley STHT77504-1 Bedienungsanleitung
Stanley
Stanley CLLi Bedienungsanleitung
Stanley
Stanley STHT77503-1 Bedienungsanleitung
Beliebte Laser-Nivelliergerät Handbücher anderer Marken
Nedo
Nedo ET-5 Bedienungsanleitung
geo-FENNEL
geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung
LaserLiner
LaserLiner X2-Laser Bedienungsanleitung
Spectra
Spectra LL300N Bedienungsanleitung
geo-FENNEL
geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung
Nedo
Nedo Crossliner 4 Bedienungsanleitung
