Star Micronics TSP200 Series Bedienungsanleitung

THERMAL PRINTER

TSP200-24

USERS MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

Federal Communications Commission

Radio Frequency Interference

Statement

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to corect

the interference at his own expense.

ForcompliancewiththeFederalNoiseInterferenceStandard,thisequipmentrequiresashielded

cable.

This statement will be applied only for the printers marketed in U.S.A.

Statement of

The Canadian Department of Communications

Radio Interference Regulations

This digital apparatus does not exceed the Class A limits for radio noise emissions from

digital apparatus set out in the Radio Interference Regulations of the Canadian Department

of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectiques dépassant les limites

applicablesauxappareilsnumériquesdelaclasseAprescritesdansleRèglementsurlebrouillage

radioélectrique édicté par le ministère des Communications du Canada.

The above statement applies only to printers marketed in Canada.

Manufacturer’s Declaration of Conformity

EC Council Directive 89/336/EEC of 3 May 1989

Thisproduct, has been designed and manufactured in accordance with the International Standards EN 50081-1/01.92 and

EN 50082-1/01.92, following the provisions of the Electro Magnetic Compatibility Directive of the European Commu-

nities as of May 1989.

EC Council Directive 73/23/EEC and 93/68/EEC of 22 July 1993

This product, has been designed and manufactured in accordance with the International Standards EN 60950, following

the provisions of the Low Voltage Directive of the European Communities as of July 1993.

The above statement applies only to printers marketed in EU.

Trademark acknowledgments

TSP200-24: Star Micronics Co. Ltd.

ESC/POS: Seiko Epson Corporation

Notice

permission, is strictly forbidden.

• The contents of this manual are subject to change without notice.

• All efforts have been made to ensure the accuracy of the contents of this manual at the time of printing. However,

should any errors be found, STAR would greatly appreciate being informed of them.

• The above notwithstanding, STAR can assume no responsibility for any errors in this manual.

ENGLISH

Table of Contents

1. Unpacking and Inspection .....................................................................1

1-1. Unpacking ....................................................................................1

1-2. Locating the Printer......................................................................1

2. Parts Identification and Nomenclature ..................................................2

3. Printer Connection.................................................................................3

3-1. Interface Cable .............................................................................3

3-2. Ferrite Core (Europe only)...............................................................5

3-3. Optional AC Adapter ...................................................................7

4. Near-End Sensor....................................................................................8

5. Loading Paper........................................................................................9

5-1. Loading Paper ..............................................................................9

5-2. Refilling the Paper Supply .........................................................13

5-3. 76mm Width Support.................................................................14

5-4. Clearing Paper Jams...................................................................16

6. Control Panel .......................................................................................17

6-1. Power ON...................................................................................17

6-2. Combined Control Panel Operations .........................................18

6-3. Errors..........................................................................................20

6-4. Buzzer Indicators (Star Mode Only) ..........................................21

7. Cautions ...............................................................................................22

7-1. Operating Cautions ....................................................................22

7-2. Safety Cautions ..........................................................................22

8. Command summary.............................................................................23

8-1. Star Mode...................................................................................23

8-2. ESC/POS Mode..........................................................................27

Appendix ...............................................................................................119

Appendix A: General Specifications ...............................................119

Appendix B: DIP Switch Setting.....................................................123

Appendix C: Interface .....................................................................125

Appendix D: Peripheral Unit Drive Circuit ....................................130

Appendix E: Cleaning .....................................................................132

– 1 –

ENGLISH

1. Unpacking and Inspection

1-1. Unpacking

Check each item in the box against Figure 1-1 to make sure that you have

everything.

If any of these items are missing, contact your supplier.

Fig. 1-1

1-2. Locating the printer

Before you start setting up your printer, make sure that you have a suitable place

in which to locate it. By “a suitable place”, we mean:

• Close to an easily accessible socket-outlet.

• A firm, level surface which is fairly vibration-free

• Away from excessive heat (such as direct sunlight, heaters, etc)

• Away from excessive humidity

• Away from excessive dust

• With access to a steady power supply that is not subject to power surges. For

example, do not connect the printer to the same circuit as a large, noise-

producing appliance such as a refrigerator or an air conditioner.

NOTE:Make sure that the line voltage is the voltage specified on the printer’s

identification plate.

;;

Printer

Sample paper roll

User's manual

Ferrite core

for peripheral

unit cable

(E.U. only)

Fastener

(E.U. only)

76mm holders support spacers

– 2 –

ENGLISH

2. Parts Identification and Nomenclature

Fig. 2-1 External view of the printer

Features two control

switches and two

indicators to indicate

printer status.

Control panel

For connection of the AC adapter.

Never unplug the AC adapter

while the printer is on.

AC adapter cable connector

Connects the printer

with host computer.

Interface connector

Turns printer

power on and off.

Power switch

Connects to peripheral units such

as cash drawers, etc.

Do not connect this to a telephone.

Peripheral unit drive circuit connector

Protects the printer from

dust and reduces noise.

Do not open the cover

while printing.

Cover

– 3 –

ENGLISH

3. Printer Connection

Please prepare the following before making connections to the printer. Always

have the power switch in the off position when making any connections.

• Interface cable

• Ferrite core (E.U. only)

• Optional AC adapter

3-1. Interface Cable 1Open the cover

2Pushtheheaduplever(green)tothe

rear.

Caution

If the printer is to be shipped, or if it

is to be stored for an extended period

oftime,alwayspull theheaduplever

forward so that the printer head is in

the up position. This will protect the

thermal head and prevent deforma-

tion of the platen.

3Close the cover.

Feed knob

[Head-closed position]

Head-up

lever

[Head-up position]

– 4 –

ENGLISH

4Plug the printer-side connector of

the interface cable into the printer

interface connector and use screws

to secure the serial interface con-

nector or a hook bracket to secure

the parallel interface connector.

Screws

Screwdriver

– 5 –

ENGLISH

3-2. Ferrite Core (Europe only)

NOTE:Take special care when following the procedures listed below.

• Pass the fastener through the ferrite

core. Fig. 3-3

• Pass the fastener around the cable

and lock it.

Cut off the excess with a pair of scis-

sors. Fig. 3-4

Fig. 3-2

Fig. 3-1

■A ferrite core noise filter for the

peripheral unit cable comes packed

with the printer.

■The ferrite core is normally packed

so it is opened, as shown in Fig. 3-1.

If you find that the ferrite core is not

opened: Use a pointed object to pry

the plastic lock of the ferrite core

apart, as shown in Fig. 3-2. When

opening it, take care not to damage

the ferrite core or the plastic lock.

;;;

Fastener

Pull and cut

One loop

Ferrite core (28mm diameter)

– 6 –

ENGLISH

■Clamp the ferrite core onto the peripheral unit cable, looping the cable as

shown in Fig. 3-1.

• When installing the ferrite core be careful not to damage the cable.

• The ferrite core should be anchored firmly in place with the fastener that

comes with it, as shown in Fig. 3-3 and Fig. 3-4.

• Do not forget to loop the cable.

Fig. 3-5

Fastener

One loop

Ferrite core

Separate ground wire

Peripheral unit drive

circuit connector

Screw M3×4

Connector

Andere Handbücher für TSP200 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Star Micronics Drucker Handbücher

Star Micronics

Star Micronics LC-4511 Bedienungsanleitung

Star Micronics

Star Micronics SP200 Series Bedienungsanleitung

Star Micronics

Star Micronics Multi-Font NX-2415 Bedienungsanleitung

Star Micronics

Star Micronics LC-240C Bedienungsanleitung

Star Micronics

Star Micronics TSP800 Series Bedienungsanleitung

Star Micronics

Star Micronics TUP592 Bedienungsanleitung

Star Micronics

Star Micronics LC24-10 Bedienungsanleitung

Star Micronics

Star Micronics LC-500 Bedienungsanleitung

Star Micronics

Star Micronics Star DP8340 Bedienungsanleitung

Star Micronics

Star Micronics SP312F Bedienungsanleitung

Star Micronics

Star Micronics LC-100+ Bedienungsanleitung

Star Micronics

Star Micronics DP8340RC Series Bedienungsanleitung

Star Micronics

Star Micronics TSP1000 Series Montageanleitung

Star Micronics

Star Micronics Star SCP700 Series Bedienungs- und Wartungshandbuch

Star Micronics

Star Micronics TSP400 Series Bedienungsanleitung

Star Micronics

Star Micronics TSP700 Series Bedienungsanleitung

Star Micronics

Star Micronics LC-1011C Bedienungsanleitung

Star Micronics

Star Micronics TSP143IIU Bedienungsanleitung

Star Micronics

Star Micronics SLIP SP298 SERIES Bedienungsanleitung

Star Micronics

Star Micronics TSP800 Series Bedienungsanleitung

Star Micronics

Star Micronics SP500 Series Bedienungsanleitung

Star Micronics

Star Micronics mC-Print3 MCP31L Kurzanleitung

Star Micronics

Star Micronics TSP200 Series Bedienungs- und Wartungshandbuch

Star Micronics

Star Micronics TSP650II SERIES Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung