Star Micronics TSP400 Series Bedienungsanleitung

80822476 IFTBD400

Installing the interface board

“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”

Federal Communications Commission Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These

limitsaredesignedtoprovide reasonableprotectionagainstharmfulinterferencewhentheequipmentisoperatedinacommercialenvironment.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,

maycauseharmfulinterferencetoradio communications.Operationofthis equipmentinaresidential areaislikelyto causeharmfulinterference

in which case the user will be required to correct the interference at his own expense.

For compliance with the Federal Noise Interference Standard, this equipment requires a shielded cable.

This statement will be applied only for the printers marketed in U.S.A.

Statement of The Canadian Department of Communications Radio Interference Regulations

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A

prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

The above statement applies only to printers marketed in Canada.

The interface board is an option for the compact size thermal printer

TSP400/TUP400 series. When installing the interface board, please use

the following procedure.

Interface Board Applicable printer

IFTBD400D ........ RS

232C TSP412 ....... without auto cutter

IFTBD400C......... Parallel TSP442 ....... with auto cutter

IFTBD400K ........ RS

422A TUP452....... without presenter

TUP482....... with presenter

IFTBD400V2D ... RS

232C TUP492....... with document capture

IFTBD400V2C.... Parallel TUP452V2.. without presenter

IFTBD400K ........ RS

422A TUP482V2.. with presenter

Installation (TSP400 Series )

1. Make sure that the power cord is unplugged.

2. Remove the interface cover of the printer.

Note: No screws have been used.

3. Position the interface board in the PCB guide as shown in the

illustration, so that the components on the interface board face

upwards. Slide the interface board in until it is firmly seated.

Note: Insert the interface board so that it connects with the

connector.

4. Secure the interface board using the three screws.

5. Replace the interface cover firmly.

Installation (TUP400 Series )

1. Make sure that the power cord is unplugged.

2. Inserttheinterfaceboardsothatitconnectswiththeconnectorofthe

control board in the printer.

3. Secure the interface board using two screws.

Printer

Interface board PCB guide

Connector

Interfaceboard

Screws(3)

Interface cover

Connector

Interface board

Screws(2)

Andere Handbücher für TSP400 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Star Micronics Drucker Handbücher

Star Micronics

Star Micronics TSP700II Series Bedienungsanleitung

Star Micronics

Star Micronics SF-10HA Bedienungsanleitung

Star Micronics

Star Micronics LC-7211 Bedienungsanleitung

Star Micronics

Star Micronics LC-240C Bedienungsanleitung

Star Micronics

Star Micronics TSP700 Series Montageanleitung

Star Micronics

Star Micronics gemini-10X Bedienungsanleitung

Star Micronics

Star Micronics SP717 Series Bedienungsanleitung

Star Micronics

Star Micronics LC-8521 Bedienungsanleitung

Star Micronics

Star Micronics SP312F Bedienungsanleitung

Star Micronics

Star Micronics Line Thermal Printer Bedienungsanleitung

Star Micronics

Star Micronics SJ-144MC Bedienungsanleitung

Star Micronics

Star Micronics TSP2000 Series Bedienungsanleitung

Star Micronics

Star Micronics NP-266S Montageanleitung

Star Micronics

Star Micronics LC-4511 Bedienungsanleitung

Star Micronics

Star Micronics SP2000 Bedienungs- und Wartungshandbuch

Star Micronics

Star Micronics SP500 Series Bedienungsanleitung

Star Micronics

Star Micronics LC-6211 Bedienungsanleitung

Star Micronics

Star Micronics NX-2460C Bedienungsanleitung

Star Micronics

Star Micronics TSP700II Series Bedienungsanleitung

Star Micronics

Star Micronics SR-10/I5 Bedienungsanleitung

Star Micronics

Star Micronics SP200F Bedienungsanleitung

Star Micronics

Star Micronics TSP700 Series Bedienungsanleitung

Star Micronics

Star Micronics LC-8211 Bedienungsanleitung

Star Micronics

Star Micronics NX-2450 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung