StarTech.com PCI EXPRESS SERIAL ADAPTER PEX4S952 Bedienungsanleitung

PCI Express Serial Adapter

PCI Express to 4 Port Serial

Card Adapter

PEX4S952

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not occur in a particu-

lar installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.•

Increase the separation between the equipment and receiver.•

Connect the equipment into an outlet on a circuit different from that to which the receiver•

is connected.

Consult the dealer or an experienced radio/TV technician for help.•

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and

do not represent an endorsement of a product or service by StarTech.com, or an en-

dorsement of the product(s) to which this manual applies by the third-party company in

question. Regardless of any direct acknowledgement elsewhere in the body of this doc-

ument, StarTech.com hereby acknowledges that all trademarks, registered trademarks,

service marks, and other protected names and/or symbols contained in this manual and

related documents are the property of their respective holders.

Table of Contents

Introduction..................................................................... 1

Packaging Contents.....................................................................1

System Requirements .................................................................1

Installation....................................................................... 1

Hardware Installation...................................................................1

Driver Installation.........................................................................2

Verifying Installation.....................................................................2

Speciﬁcations.................................................................. 3

Technical Support........................................................... 4

Warranty Information ...................................................... 4

Introduction

Packaging Contents

1 x PEX4S952 card•

1 x 4 port DB9 break-out cable•

1 x User Manual•

1 x Driver CD•

System Requirements

PCI Express enabled computer with an available PCI Express slot•

Microsoft Windows• ®2000/XP/2003 Server/Vista

Installation

Hardware Installation

Turn your computer off and any peripherals connected to the1.

computer (ie. Printers, external hard drives, etc.). Unplug the power

cable from the rear of the power supply on the back of the computer.

Remove the cover from the computer case.2.

Locate an open PCI Express slot and remove the metal cover plate3.

on the rear of the computer case. Note that this card will work in PCI

Express slots of additional lanes (ie. x4, x8 or x16 slots)

Insert the card into the open PCI Express slot and screw the bracket4.

to the rear of the case.

Place the cover back onto the computer.5.

Insert the power cable into the socket on the power supply.6.

Driver Installation

Windows®2000/XP/Server 2003

When the Found New Hardware wizard appears on the screen,1.

insert the Driver CD into your CD-ROM drive. If you are prompted

to connect to Windows Update, please select the “No, not this time”

option and click Next.

Select the option “Install Drivers Automatically (Recommended)” and2.

then click the Next button.

Windows should now start searching for the drivers. Once this has3.

completed, click the Finish button.

Windows®Vista

When the Found New Hardware window appears on the screen,1.

click on the “Locate and install drivers software (recommended)”

option. If prompted to search online, select the “Don’t search online”

option.

When prompted to insert the disc, insert the Driver CD that came2.

with the PEX4S952, into your CD-ROM drive and Windows will

automatically proceed to search the CD.

If a Windows Security dialog window appears, click the “Install this3.

driver software anyway” option to proceed.

Once the driver is installed, click the Close button.4.

Verifying Installation in Windows 2000/XP/2003 Server/Vista

From the main desktop, right-click on My Computer, then select1.

Manage. In the new Computer Management window, select Device

Manager from the left window panel.

Double-click on Ports (COM & LPT) option. The appropriate number2.

of additional COM ports should be visible. The ports are ready to

connect to new devices.

Specications

Bus Interface PCI Express x1

Chipset Oxford OXPCIe954

UART 16C950

Number of Connectors 4 x DB-9

Maximum Data Transfer Rate 460 Kbps

Supported Protocol RS-232

Supported Operating Systems Windows®2000/XP/2003 Server/

Vista, Linux®Kernel 2.4.x/2.6.x

Technical Support

StarTech.com’s lifetime technical support is an integral part of our com-

mitment to provide industry-leading solutions. If you ever need help with

your product, visit www.startech.com/support and access our compre-

hensive selection of online tools, documentation, and downloads.

Warranty Information

This product is backed by a one year warranty.

In addition, StarTech.com warrants its products against defects in

materials and workmanship for the periods noted, following the initial

date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The

warranty covers parts and labor costs only. StarTech.com does not war-

rant its products from defects or damages arising from misuse, abuse,

alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com

USA LLP (or their ofﬁcers, directors, employees or agents) for any dam-

ages (whether direct or indirect, special, punitive, incidental, consequen-

tial, or otherwise), loss of proﬁts, loss of business, or any pecuniary loss,

arising out of or related to the use of the product exceed the actual price

paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limita-

tions or exclusions contained in this statement may not apply to you.

StarTech.com has been making “hard-to-ﬁnd easy” since 1985,

providing high quality solutions to a diverse IT and A/V customer

base that spans many channels, including government, education

and industrial facilities to name just a few. We offer an unmatched

selection of computer parts, cables, A/V products, KVM and Serv-

er Management solutions, serving a worldwide market through our

locations in the United States, Canada, the United Kingdom and

Taiwan.

Visit www.startech.com today for complete information about all

our products and to access exclusive interactive tools such as the

Cable Finder, Parts Finder and the KVM Reference Guide.

Inhaltsverzeichnis

Andere StarTech.com Adapter Handbücher

StarTech.com

StarTech.com USB2VGA2 Bedienungsanleitung

StarTech.com

StarTech.com DKT31CMDPHPD Bedienungsanleitung

StarTech.com

StarTech.com DKT30CHVGPD Bedienungsanleitung

StarTech.com

StarTech.com USB31000SPTB Bedienungsanleitung

StarTech.com

StarTech.com HD2DPVGADVI Bedienungsanleitung

StarTech.com

StarTech.com ECUSB3S2 Bedienungsanleitung

StarTech.com

StarTech.com USB32HDVGA Bedienungsanleitung

StarTech.com

StarTech.com IP2DVI Bedienungsanleitung

StarTech.com

StarTech.com USB31000SA Bedienungsanleitung

StarTech.com

StarTech.com USB312SAT3CB Bedienungsanleitung

StarTech.com

StarTech.com USB2DVIE2 Bedienungsanleitung

StarTech.com

StarTech.com ST3300GU3B Bedienungsanleitung

StarTech.com

StarTech.com USB32000SPT Bedienungsanleitung

StarTech.com

StarTech.com USB32HD2 Bedienungsanleitung

StarTech.com

StarTech.com USB32VGAPRO Bedienungsanleitung

StarTech.com

StarTech.com USB300WN2X2 Bedienungsanleitung

StarTech.com

StarTech.com DVI2HD Bedienungsanleitung

StarTech.com

StarTech.com ICUSB2321284 Systemhandbuch

StarTech.com

StarTech.com USB3S2SATA3 Bedienungsanleitung

StarTech.com

StarTech.com USB312SAT3CB Bedienungsanleitung

StarTech.com

StarTech.com USB32HDDVII Bedienungsanleitung

StarTech.com

StarTech.com SP122DP2HD Bedienungsanleitung

StarTech.com

StarTech.com 1P3FP-USB-SERIAL Bedienungsanleitung

StarTech.com

StarTech.com PEX433WAC11 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung